Saturn LS1 Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(11)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(11)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Saturn LS1 Mass Airflow Sensor Replacement is $237 with $142 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Saturn LS1L4-2.2LService typeMass Airflow Sensor ReplacementEstimate$399.35Shop/Dealer Price$480.44 - $701.21
Show example Saturn LS1 Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(11)

Rating Summary
10
0
0
0
1
10
0
0
0
1

Whitney

39 years of experience
783 reviews
Whitney
39 years of experience
Saturn LS1 L4-2.2L - Oil Change - Sunnyvale, California
Whitney called and apologized for running late [a first]. When he arrived, he was very polite, pleasant, knowledgeable, efficient and helpful. He changed the oil and filter, then checked the codes for my car [all clear]. He showed us where the "oil reset" button was and taught us what to do. Job was completed in about 20 minutes. Thank you Whitney for being so awesome. I look forward to future appointments.

Richard

20 years of experience
27 reviews
Richard
20 years of experience
Saturn LS1 L4-2.2L - Brake Pads Replacement (Front) - Whittier, California
Richard was great! Very knowledgeable. I would recommend.

Joshua

16 years of experience
12 reviews
Joshua
16 years of experience
Saturn LS1 L4-2.2L - Turn Signal Switch - Thonotosassa, Florida
Excellent! On Time, Fast,Clean...Perfect! I will tell family and friends about "Your Mechanic"

Milton

37 years of experience
239 reviews
Milton
37 years of experience
Saturn LS1 L4-2.2L - Battery - Henderson, Nevada
Outstanding

Excellent Rating

(11)

Rating Summary
10
0
0
0
1
10
0
0
0
1
Number of Saturn LS1 services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

Can Sensors Be Cleaned or Do They Need to Be Replaced?
In In most cases, sensors for your automobile will need to be replaced if they fail, but depending on the type of sensor and its location or function, some can be cleaned and reused (https://www.yourmechanic.com/question/can-sensors-be-cleaned-or-do-they-need-to-be-replaced). Sensors can come in many...
How Long Does a Cylinder Head Temperature Sensor Last?
The The engine’s performance is largely based on temperature measurements performed by the engine control module (ECM), also known as the vehicle’s computer. As the temperature of the engine increases, the resistance decreases which means the voltage drops. The computer...
How to Replace a Fuel Rail Sensor
The fuel system has a fuel rail sensor which fails when the engine operates erratically, has difficulty starting, or the Check Engine Light comes on.

Ambient air temperature sensor location

Hi there: Without knowing the exact make, year and model of your GMC it's hard to pinpoint the exact location of the ambient air temperature sensor. However, on most GMC pickups, it's located behind the front bumper, on the passenger...

What happens if I don't replace knock sensor?

The knock sensor on the engine is there to detect for an engine noise from pre ignition (pining) normally. This is so the computer can advance the ignition timing to the maximum it can without the engine pinging. This gives...

When a car doesn't want to shift, what sensor is it for on a Cadillac SRX 2005?

Hi there. There are three different types of sensors and solenoids that will cause a transmission to not shift. 1. --- Transmission Position Sensor (https://www.yourmechanic.com/services/transmission-position-sensor-switch-replacement) 2. --- Vehicle Speed Sensor (https://www.yourmechanic.com/services/speed-sensor-replacement) 3. --- Shift Solenoids (https://www.yourmechanic.com/services/car-does-not-shift-from-park-to-drive-inspection) All three types of...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com