Saturn L300 Serpentine/Drive Belt Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Serpentine/Drive Belt Replacement Service

How much does a Serpentine/Drive Belt Replacement cost?

On average, the cost for a Saturn L300 Serpentine/Drive Belt Replacement is $174 with $34 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Saturn L300V6-3.0LService typeSerpentine/Drive Belt ReplacementEstimate$279.44Shop/Dealer Price$307.12 - $380.44
2001 Saturn L300V6-3.0LService typeSerpentine/Drive Belt ReplacementEstimate$268.63Shop/Dealer Price$294.19 - $365.92
2005 Saturn L300V6-3.0LService typeSerpentine/Drive Belt ReplacementEstimate$268.63Shop/Dealer Price$294.22 - $365.97
2004 Saturn L300L4-2.2LService typeSerpentine/Drive Belt ReplacementEstimate$213.87Shop/Dealer Price$232.70 - $285.00
2004 Saturn L300V6-3.0LService typeSerpentine/Drive Belt ReplacementEstimate$268.63Shop/Dealer Price$295.99 - $369.06
2002 Saturn L300V6-3.0LService typeSerpentine/Drive Belt ReplacementEstimate$268.63Shop/Dealer Price$294.39 - $366.26
Show example Saturn L300 Serpentine/Drive Belt Replacement prices

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump. The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump.

Belts

When to consider replacing the serpentine belt:

  • Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
  • Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
  • Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
  • Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

How do mechanics replace the serpentine belt?

  • Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane. These steps help make sure your new belt will operate trouble-free for its full-service life.
  • The belt’s routing path through the various components is noted. The belt tensioner is released, usually with a wrench or lever, to release the tension from the belt. With the tension off, the belt slides off the pulleys.
  • All rotating components — that is the alternator, air conditioner compressor, etc. — are checked for smooth operation and no noise.
  • If everything checks out, the new belt is slipped over all of the pulleys while holding the tensioner away from the belt. Once the belt is centered on all pulleys, the tensioner is released and the installation is complete. The engine is run to ensure normal operation.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle. Additionally, if a deteriorated belt breaks and that belt drives the water pump, the engine will overheat in a matter of seconds.

When replacing the serpentine belt keep in mind:

  • On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.
  • Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.
  • Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Saturn L300 Serpentine/Drive Belt Replacement services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

P2649 OBD-II Trouble Code: ‘A’ Rocker Arm Actuator Control Circuit High Bank 1
P2649 P2649 code definition ‘A’ Rocker Arm Actuator Control Circuit High Bank 1 What the P2649 code mean P2649 is an OBD-II code for the engine control module (ECM) detecting the ‘A’ rocker arm actuator control circuit for bank 1...
What Does the Adaptive Lighting Indicator Warning Light Mean?
The adaptive lighting warning light means there is an issue with the automatic function for the front car headlights, which could be caused by dirt.
P2513 OBD-II Trouble Code: Event Data Recorder Request Circuit Low
P2513 P2513 code definition The P2513 code relates to a fuel composition sensor circuit malfunction, most commonly stemming from an issue in the operation of the variable cam timing (VCT) solenoid, which changes the timing of the camshaft position to...

Car clicking and not starting

Hello. If the starter is fine and if the battery is definitely fine then you may have an electrical issue. Most of the time, it is a failure in the starter relay or the positive battery cable. It may even...

BAS/ESP light coming on

Your vehicle may be having an issue with the connections to the brake sensor. The connections may have corrosion which will make the system go into failure mode, intermittently causing the throttle to not respond. I recommend having your brake...

I brought my car in for an alignment and check the [brakes](/topics-brake-ford/). It is a 2018 Ford Flex with 60k, The dealer came back and said I need all four rotors replaced, but my front brakes were fine, but my back brakes needed to be replaced. I understand the front rotors, but not when he said the front brakes were fine. It seemed dubious to me.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com