Saab 900 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(29)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(29)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Saab 900 Power Steering Pressure Hose Replacement is $286 with $146 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Saab 900L4-2.1LService typePower Steering Pressure Hose ReplacementEstimate$483.30Shop/Dealer Price$568.98 - $817.90
1997 Saab 900L4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$518.37Shop/Dealer Price$606.36 - $865.40
1994 Saab 900L4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$503.49Shop/Dealer Price$587.79 - $835.69
1991 Saab 900L4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$474.29Shop/Dealer Price$558.22 - $805.84
1998 Saab 900L4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$518.37Shop/Dealer Price$608.16 - $868.54
1994 Saab 900L4-2.1LService typePower Steering Pressure Hose ReplacementEstimate$503.49Shop/Dealer Price$587.96 - $835.98
1995 Saab 900L4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$518.37Shop/Dealer Price$606.41 - $865.48
1995 Saab 900L4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$518.37Shop/Dealer Price$606.39 - $865.45
Show example Saab 900 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saab mechanics

Real customer reviews from Saab owners like you.

Excellent Rating

(29)

Rating Summary
22
4
3
0
0
22
4
3
0
0

Chris

16 years of experience
112 reviews
Chris
16 years of experience
Saab 900 L4-2.1L - Car is not starting - Zephyrhills, Florida
Excellent job. Very knowledgeable in performing his job on my SAAB.

Carlos

13 years of experience
77 reviews
Carlos
13 years of experience
Saab 900 L4-2.0L Turbo - Car is not getting enough power - Downey, California
Great service, professional, reasonable...

Caster

29 years of experience
176 reviews
Caster
29 years of experience
Saab 900 L4-2.0L Turbo - Oil Change - Petaluma, California
This was my first time using YourMechanic. Castor came highly recommended and for good reason, On time, quick, professional and friendly. I will definitely use this service again!

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Saab 900 L4-2.3L - Oil or Fluid is leaking - Irvine, California
This is a great service, and Chris was professional, courteous and we are very satisfied with his work.

Excellent Rating

(29)

Rating Summary
22
4
3
0
0
22
4
3
0
0
Number of Saab 900 services completed
319+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saab MECHANICS
200+
experts on our platform

Recent articles & questions

How to Diagnose and Repair a Faulty Windshield Washer Pump
The The role of your vehicle’s windshield washer pump (https://www.yourmechanic.com/services/windshield-washer-pump-replacement) is to take the washer fluid from the reservoir and circulate it through the tubes to the car’s windshield washer nozzles (https://www.yourmechanic.com/services/windshield-washer-nozzles-replacement). The nozzles then spray the washer fluid on...
P0413 OBD-II Trouble Code: Secondary Air Injection System Switching Valve A Circuit Open
P0413 means theres a issue with the vehicle’s air injection system due to faulty air injection pump, faulty wiring or faulty air bypass solenoid.
Disabled Driver Laws and Permits in Nevada
If If you live in Nevada, and you have a disability, you could qualify for a special permit that lets you use handicapped parking spaces. You could qualify for a temporary, moderate, or permanent placard, permanent plate, or disabled veteran...

Car won't stay running

Sounds like you might be having an alternator problem. The vehicle uses the battery to start, once it is running the alternator takes over providing the vehicle with all the electricity it needs. If the alternator fails, the car continues...

Car backfiring and spitting

The fuel pressure may be low and starving the engine for fuel. The first thing you should check is the fuel pressure and that the fuel filter is not blocking the flow of fuel. If both of these check out...

Car cranks, but won't start

If you have teeth on the flywheel missing it is possible that if the engine stops at just the right spot the starter will not be able to engage the flywheel and turn it. In order to replace the flywheel...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com