Saab 9-2X Oil Pressure Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Oil Pressure Sensor Replacement Service

How much does a Oil Pressure Sensor Replacement cost?

On average, the cost for a Saab 9-2X Oil Pressure Sensor Replacement is $182 with $42 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Saab 9-2XH4-2.5LService typeOil Pressure Sensor ReplacementEstimate$239.88Shop/Dealer Price$264.70 - $331.06
2006 Saab 9-2XH4-2.5L TurboService typeOil Pressure Sensor ReplacementEstimate$306.63Shop/Dealer Price$348.62 - $470.48
2005 Saab 9-2XH4-2.0L TurboService typeOil Pressure Sensor ReplacementEstimate$306.63Shop/Dealer Price$348.65 - $470.52
2006 Saab 9-2XH4-2.5LService typeOil Pressure Sensor ReplacementEstimate$230.87Shop/Dealer Price$253.95 - $319.00
Show example Saab 9-2X Oil Pressure Sensor Replacement prices

What is the Oil Pressure Sensor all about?

Oil is vital for your engine – you need enough oil to lubricate and reduce friction throughout the engine. There’s no way to visually determine how much oil is being pumped through your engine, so your car’s computer relies on the oil pressure sensor to determine the flow.The oil pressure sensor is a basic electrical switch that provides information to the instrument cluster’s oil pressure gauge with the accurate real-time pressure. When the pressure is too low, not enough oil is being pumped through the engine to lubricate and cool components. When pressure drops below a threshold set by the automaker, the engine oil light on the car’s dashboard illuminates, warning you that driving could be dangerous.

Keep in mind:

  • There is no way to visually determine the operating condition of your oil pressure sensor.
  • If the sensor fails, it is impossible to determine whether there is sufficient oil flow/pressure to lubricate and protect your engine.
  • If your oil pressure sensor fails, it should be replaced immediately.

How it's done:

  • The vehicle is raised and supported on jack stands and tire is removed
  • The defective oil pressure sensor is removed
  • The new oil pressure sensor is installed
  • The engine is started and oil pressure is checked then the vehicle is taken off the jack stands
  • The vehicle is road tested for proper operation

Our recommendation:

Your car’s oil pressure sensor is an electrical component, and can be subjected to a number of issues, including wiring damage. If you suspect damage to the sensor, or have noticed your oil light come on, have it inspected and diagnosed by one of our expert mechanics.

What common symptoms indicate you may need to replace the Oil Pressure Sensor?

  • Oil pressure light is on
  • Oil pressure light turns on and off (can indicate several potential problems)
  • Depending on your make and model, you may have an oil pressure gauge that displays pressure in PSI. Note any drops below normal operating pressure.

How important is this service?

It is absolutely vital that your engine oil pressure be constantly monitored for potentially dangerous conditions. If your oil pressure sensor isn’t working properly, it cannot do its job, and must be replaced. If your oil pressure light comes on, call one of our expert mechanics immediately (driving with the light on can potentially cause damage).

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saab mechanics

Real customer reviews from Saab owners like you.

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0

Theodore

17 years of experience
1794 reviews
Theodore
17 years of experience
Saab 9-2X H4-2.0L Turbo - Check Engine Light is on - Mercer Island, Washington
It was excellent. He can right on the dot and instantly knew what to do. it said it would take an hour to work, he did it in 15 minutes. and he was straight and forward with his descriptions on what to do.

Chris

21 years of experience
448 reviews
Chris
21 years of experience
Saab 9-2X H4-2.5L - Pre-purchase Car Inspection - Battle Ground, Washington
Answered all of my questions.

Leo

42 years of experience
74 reviews
Leo
42 years of experience
Saab 9-2X H4-2.5L - Serpentine/Drive Belt - Fremont, California

Nathaniel

17 years of experience
101 reviews
Nathaniel
17 years of experience
Saab 9-2X H4-2.0L Turbo - Car is not starting - Palmetto, Georgia

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0
Number of Saab 9-2X services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saab MECHANICS
200+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Daytime Running Lamp Module
If your daytime running lights do not come on, stay on when the car is off, or produce a burning smell, you may have to replace their module.
The Most Common Error Codes for Transmission Problems
If your Check Engine Light has come on, there are a number of conditions that could be causing it. Many are related...
How to Replace an Exhaust Gas Recirculation (EGR) Tube
The EGR valve is connected to an EGR pipe, which helps distribute molecules through your vehicle’s EGR system. A bad pipe leads to performance issues.

What does the 4x2 Light mean?

The 4x2 Light indicates the performance of the two-wheel drive high feature. The driver selects when this feature is on. To understand the 4x2 Light. The 4x2 Light will illuminate briefly when the two-wheel drive high feature is enabled. If...

How do I use the automatic headlights?

When the automatic headlight system is turned on, the headlights will automatically turn on and off, depending on how dark it is outside. To turn the automatic headlights on, first find the turn signal lever, which protrudes from the left...

I pulled too close to a concrete parking stall and scraped the bottom of the front bumper. What type of damage should I look for?

Hello. The extent of damage you should be looking for is relative to how hard that concrete blocker with hit/scraped. Its dificult to say which parts may have been effected without knowing where exactly the vehicle was hit. The radiator...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com