logo

Ram ProMaster City Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(11)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(11)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Ram ProMaster City Fuel Injector Replacement is $1139 with $257 for parts and $882 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Ram ProMaster CityL4-2.4LService typeFuel Injector ReplacementEstimate$1489.54Shop/Dealer Price$1640.48 - $2042.27
2017 Ram ProMaster CityL4-2.4LService typeFuel Injector ReplacementEstimate$1432.78Shop/Dealer Price$1572.59 - $1966.03
2015 Ram ProMaster CityL4-2.4LService typeFuel Injector ReplacementEstimate$1508.70Shop/Dealer Price$1667.65 - $2118.15
Show example Ram ProMaster City Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Ram ProMaster City services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ram MECHANICS
300+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Ram mechanics

Real customer reviews from Ram owners like you.

Excellent Rating

(11)
Rating Summary
10
0
0
1
0
10
0
0
1
0

James

32 years of experience
705 reviews
Request James
James
32 years of experience
Request James
by Joshua
Ram ProMaster City L4-2.4L - Strut Assembly Replacement (Front) - Bell, California
James completed the job in a timely and professional manner

Alex

24 years of experience
464 reviews
Request Alex
Alex
24 years of experience
Request Alex
by Ervin
Ram ProMaster City L4-2.4L - Check Engine Light is on - Austin, Texas
Good descriptions on invoice

Chris

23 years of experience
2372 reviews
Request Chris
Chris
23 years of experience
Request Chris
by Henry
Ram ProMaster City L4-2.4L - Car is not shifting into park - Riverside, California
Chris was very professional and friendly and did everything in his power to help me. Unfortunately I could not get my van into my driveway in order for him to complete the job I needed. I will call him later when I get my van in the driveway for him to be safe to work.

Thomas

13 years of experience
227 reviews
Request Thomas
Thomas
13 years of experience
Request Thomas
by Eric
Ram ProMaster City L4-2.4L - Air Filter - Fort Worth, Texas
Very nice. On time. Very helpful.

Excellent Rating

(11)
Rating Summary
10
0
0
1
0
10
0
0
1
0
Number of Ram ProMaster City services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ram MECHANICS
300+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

How to Become an ASE Certified Mechanic
Automotive technician jobs are often easier to get if you have ASE certification. Apply, study, and pass exams to improve your auto mechanic salary.
Read more
How to Get Mud Off Car Carpet
It’s It’s expected that the floor mats in your car are going to get dirty, especially if you have animals or kids. If you have floor mats in your car that are carpeted instead of rubber or vinyl, they can...
Read more
What to Do When You See an Emergency Vehicle
If you see an emergency vehicle while driving, know how to safely pull over to give it the right of way.
Read more

Are High and Low Beams Separate Bulbs?

This is a great question since depending on the vehicle and manufacturer the lights can be configured in different ways. This can be a concern if you find your headlights are not working, since you need to know what type...
Read more

Car is struggling to go past 40 MPH.

Hi there. If your vehicle is having trouble going past 40 mph, then check the mass air flow sensor (MAF (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement)) and the fuel pressure regular. Both of these items could be restricting the engine and causing it to have...
Read more

Ok I have a 2004 infiniti m45 my key would not turn and my security light stay on

Read more
  1. Home
  2. Estimates
  3. Ram
  4. ProMaster City
  5. Fuel Injector Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com

Read FAQ
GET A QUOTE