Ram ProMaster 1500 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(31)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(31)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Ram ProMaster 1500 Front Crankshaft Seal Replacement is $325 with $17 for parts and $308 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Ram ProMaster 1500L4-3.0L Turbo DieselService typeFront Crankshaft Seal ReplacementEstimate$466.78Shop/Dealer Price$506.15 - $606.42
2014 Ram ProMaster 1500L4-3.0L Turbo DieselService typeFront Crankshaft Seal ReplacementEstimate$446.96Shop/Dealer Price$482.44 - $579.80
2016 Ram ProMaster 1500V6-3.6LService typeFront Crankshaft Seal ReplacementEstimate$355.16Shop/Dealer Price$367.74 - $396.30
2015 Ram ProMaster 1500V6-3.6LService typeFront Crankshaft Seal ReplacementEstimate$355.16Shop/Dealer Price$367.74 - $396.29
2017 Ram ProMaster 1500V6-3.6LService typeFront Crankshaft Seal ReplacementEstimate$355.16Shop/Dealer Price$370.98 - $401.96
2017 Ram ProMaster 1500L4-3.0L Turbo DieselService typeFront Crankshaft Seal ReplacementEstimate$446.96Shop/Dealer Price$482.80 - $580.43
2015 Ram ProMaster 1500L4-3.0L Turbo DieselService typeFront Crankshaft Seal ReplacementEstimate$446.96Shop/Dealer Price$482.52 - $579.95
2014 Ram ProMaster 1500V6-3.6LService typeFront Crankshaft Seal ReplacementEstimate$389.22Shop/Dealer Price$410.31 - $464.41
Show example Ram ProMaster 1500 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ram mechanics

Real customer reviews from Ram owners like you.

Excellent Rating

(31)

Rating Summary
29
0
0
1
1
29
0
0
1
1

Miguel

22 years of experience
273 reviews
Miguel
22 years of experience
Ram ProMaster 1500 V6-3.6L - Parking / Emergency Brake does not work - Oakland, New Jersey
Excellent!

Robert

19 years of experience
18 reviews
Robert
19 years of experience
Ram ProMaster 1500 V6-3.6L - Brake Rotor/Disc Replacement (Rear) - Atlanta, Georgia
Fast and helpful!

Stephen

33 years of experience
220 reviews
Stephen
33 years of experience
Ram ProMaster 1500 V6-3.6L - Oil Change - Boulder, Colorado
Stephen is super attentive and great to work with. He remembered to check in with the specific oil I requested last time. He's on time and very nice. I appreciate him servicing my car regularly. Thanks, Stephen!

Patrick

34 years of experience
1579 reviews
Patrick
34 years of experience
Ram ProMaster 1500 V6-3.6L - Oil Change - San Marcos, Texas
Great

Excellent Rating

(31)

Rating Summary
29
0
0
1
1
29
0
0
1
1
Number of Ram ProMaster 1500 services completed
341+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ram MECHANICS
300+
experts on our platform

Recent articles & questions

P0406 OBD-II Trouble Code: Exhaust Gas Recirculation Sensor "A" Circuit High
P0406 code definition P0406 is a general ODB2 trouble code indicating a fault within the exhaust gas recirculation EGR circuit. This code...
How to Do a Compression Test
A compression test diagnoses many engine problems. If a compression test is below the manufacturer's specifications, there's an internal engine issue.
How to Replace a Lost or Stolen Car Title in Kentucky
It’s It’s an exciting day when you finally pay off the loan for your vehicle, or maybe you’re lucky enough to have saved enough money up front that you can pay for it in full. Whatever the route you have...

After installing new spark plugs they soot up after 70 miles

High mileage engines leak oil into the combustion chamber through worn out valve stem oil seals, worn valve guides and ill fitting piston rings. If a substantial amount of oil is entering the combustion chamber the plugs will quickly foul....

Car starts, shakes then Dies out within seconds!

Hi there. The dreaded rotten egg smell is caused by either a clutch that is damaged or the catalytic converter that needs to be replaced. I would recommend before you take your car to any repair facility or attempt any...

I recently ran my truck hot.

Was a compression test done on the engine before it was started for the first time? Depending on where the knocking is coming from, there may be a deeper internal engine failure either from the overheating or it was not...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com