Porsche Cayman Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(31)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(31)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Porsche Cayman Power Steering Pressure Hose Replacement is $662 with $354 for parts and $308 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Porsche CaymanH6-3.4LService typePower Steering Pressure Hose ReplacementEstimate$1162.16Shop/Dealer Price$1387.25 - $2017.97
2007 Porsche CaymanH6-3.4LService typePower Steering Pressure Hose ReplacementEstimate$1127.14Shop/Dealer Price$1338.71 - $1950.75
2008 Porsche CaymanH6-2.7LService typePower Steering Pressure Hose ReplacementEstimate$1127.14Shop/Dealer Price$1338.85 - $1950.99
2010 Porsche CaymanH6-2.9LService typePower Steering Pressure Hose ReplacementEstimate$1029.24Shop/Dealer Price$1216.47 - $1755.18
2010 Porsche CaymanH6-3.4LService typePower Steering Pressure Hose ReplacementEstimate$1029.24Shop/Dealer Price$1224.57 - $1769.36
2008 Porsche CaymanH6-3.4LService typePower Steering Pressure Hose ReplacementEstimate$1127.14Shop/Dealer Price$1339.62 - $1952.33
2015 Porsche CaymanH6-3.4LService typePower Steering Pressure Hose ReplacementEstimate$1142.34Shop/Dealer Price$1357.93 - $1981.53
2016 Porsche CaymanH6-3.4LService typePower Steering Pressure Hose ReplacementEstimate$1142.34Shop/Dealer Price$1357.84 - $1981.38
Show example Porsche Cayman Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Porsche mechanics

Real customer reviews from Porsche owners like you.

Excellent Rating

(31)

Rating Summary
30
1
0
0
0
30
1
0
0
0

John

10 years of experience
12 reviews
John
10 years of experience
Porsche Cayman H6-2.7L - Oil Change - Edgewater, New Jersey
Excellent service experience

Theodore

17 years of experience
1794 reviews
Theodore
17 years of experience
Porsche Cayman H6-2.7L - Brake Pads Replacement (Front, Rear) - Renton, Washington
Excellent service!! Theodore was right on time and great to work with. He did an excellent job. I will recommend Your Mechanic to my Freinds. I will continue to use your services. thank you

Faraz

23 years of experience
142 reviews
Faraz
23 years of experience
Porsche Cayman H6-2.7L - Heater Blower Motor Resistor - Milpitas, California
Very professional, very knowledgeable about the car. I found my mechanic!! Thanks!!!

John

37 years of experience
565 reviews
John
37 years of experience
Porsche Cayman H6-3.4L - Oil Change - Redwood City, California
John was great! he showed up on time and was very careful with the car. He also showed me around my car, what matters and what will need service eventually

Excellent Rating

(31)

Rating Summary
30
1
0
0
0
30
1
0
0
0
Number of Porsche Cayman services completed
341+
services done by our mechanics
TOTAL NUMBER OF EXPERT Porsche MECHANICS
300+
experts on our platform

Recent articles & questions

Is It Safe to Drive During Lightning?
You You have almost certainly heard that the best place for you to be in a lightning storm is in your car, but is that really true? Not necessarily. Of course there are worse places to be, like a golf...
How Long Does a Radiator Last?
Your Your car’s coolant system is vital to ensure that the engine stays within operating temperature limits and does not overheat. It’s comprised of several different components. The radiator is the largest, but there are others, including the upper and...
How to Buy a Good Quality Cell Phone Car Mount/Holder
Where Where do you set your cell phone when you’re in the car? If you’re looking for a way to have it visible, and not loose in the car, then a cell phone car mount/holder is the ideal option. These...

How do I jump start the battery in a 2012 Honda Accord?

If the battery in your Accord is dead, you’ll need a jump to get running once more (and then you’ll probably want to get the battery replaced, or at least have the charging system checked). To jump your battery, follow...

Service Engine Soon light staying on.

Evaporative systems seal the tank off from atmosphere and purge through the intake while the engine is running, if the computer senses that one of the valves electrical or mechanical functions aren't appropriate it will set a check engine light...

Audi transmission wont engage and acts as if if has no power but lights are on. When trying to jump start with a starter box, owner removed keys from ignition and removed box from battery and car kept clicking

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com