Pontiac Vibe Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(200)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(200)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Pontiac Vibe Fuel Injector Replacement is $875 with $721 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Pontiac VibeL4-1.8LService typeFuel Injector ReplacementEstimate$2407.40Shop/Dealer Price$2970.59 - $4651.23
2004 Pontiac VibeL4-1.8LService typeFuel Injector ReplacementEstimate$1646.31Shop/Dealer Price$2009.35 - $3092.72
2003 Pontiac VibeL4-1.8LService typeFuel Injector ReplacementEstimate$1906.71Shop/Dealer Price$2334.89 - $3613.58
2009 Pontiac VibeL4-2.4LService typeFuel Injector ReplacementEstimate$3435.10Shop/Dealer Price$4231.53 - $6613.27
2008 Pontiac VibeL4-1.8LService typeFuel Injector ReplacementEstimate$2397.49Shop/Dealer Price$2960.38 - $4640.80
2006 Pontiac VibeL4-1.8LService typeFuel Injector ReplacementEstimate$1646.31Shop/Dealer Price$2009.58 - $3093.12
2009 Pontiac VibeL4-1.8LService typeFuel Injector ReplacementEstimate$2532.98Shop/Dealer Price$3103.90 - $4809.08
2010 Pontiac VibeL4-2.4LService typeFuel Injector ReplacementEstimate$3435.10Shop/Dealer Price$4231.53 - $6613.27
Show example Pontiac Vibe Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(200)

Rating Summary
191
5
1
0
3
191
5
1
0
3

Joshua

28 years of experience
709 reviews
Joshua
28 years of experience
Pontiac Vibe L4-2.4L - Battery - Berkeley, California
Fast, professional, and friendly service. Super convenient and a reasonable price. Joshua Floyd arrived early, diagnosed the problem, and had us going again in no time. Would definitely use this service again.

Albert

14 years of experience
27 reviews
Albert
14 years of experience
Pontiac Vibe L4-1.8L - Oil Change - Philadelphia, Pennsylvania
He has been great to work with. Shows up on time and always explains the problem in a way that me, a person who knows nothing about cars, can understand. Also love that he can come to the house.

Chris

12 years of experience
83 reviews
Chris
12 years of experience
Pontiac Vibe L4-1.8L - Car Battery Terminal Ends Replacement - Noblesville, Indiana
Chris is great and honest. Arrived on time and offered additional suggestions. No pressure to do additional work. Highly recommend.

Mark

42 years of experience
77 reviews
Mark
42 years of experience
Pontiac Vibe L4-1.8L - Power Steering Pressure Hose - Canton, Georgia
Wonderful guy, knows his stuff.

Excellent Rating

(200)

Rating Summary
191
5
1
0
3
191
5
1
0
3
Number of Pontiac Vibe services completed
2200+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

P2123 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch D Circuit High Input
P2123 P2123 Code Definition Throttle/Pedal Position Sensor/Switch D Circuit High Input What the P2123 code means The P2123 trouble code indicates that the Engine Control Module (ECM), which is in charge of receiving a signal from the throttle position sensor,...
How to Repair a Door Lock Actuator
The power door lock actuator can be integral to a car door lock repair. If a remote device or unlock switch fails, the actuator may be faulty.
Cell Phones and Texting: Distracted Driving Laws in New Hampshire
New New Hampshire has some of the strictest laws in the country when it comes to cell phones, texting, and driving. New laws went into effect on July 1, of 2015 to prohibit the use of any device which is...

I have an oil leak and a low oil pressure light on.

Sounds like it could be the oil pressure sensor. Have a technician test the sensor to determine if it needs to be replaced (https://www.yourmechanic.com/services/oil-pressure-sensor-replacement). I definitely would not drive it until that is checked because you could do damage to...

Blend door actuator spinning one direction

If you plugged in the actuator before installing it then you have ruined the new one and need to replace it then install it before you connect the electrical connector. The system will then relearn the positions.

I got a question.. can you remove the cdv on an automatic transmission, if so what are the pros and cons of the delete?

Only manual transmissions are equipped with clutch delay valves in the clutch actuating mechanism. On automatic transmission equipped vehicles such as yours, shift points, rate of engagement of the clutch and applied line pressure are all controlled electronically. To modify...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com