Pontiac Sunfire Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(93)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(93)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Pontiac Sunfire Intake Manifold Gaskets Replacement is $266 with $84 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Pontiac SunfireL4-2.4LService typeIntake Manifold Gaskets ReplacementEstimate$450.94Shop/Dealer Price$514.47 - $693.70
1999 Pontiac SunfireL4-2.2LService typeIntake Manifold Gaskets ReplacementEstimate$624.67Shop/Dealer Price$676.85 - $821.00
1999 Pontiac SunfireL4-2.4LService typeIntake Manifold Gaskets ReplacementEstimate$438.33Shop/Dealer Price$499.41 - $676.82
2000 Pontiac SunfireL4-2.2LService typeIntake Manifold Gaskets ReplacementEstimate$624.67Shop/Dealer Price$676.92 - $821.12
2003 Pontiac SunfireL4-2.2LService typeIntake Manifold Gaskets ReplacementEstimate$358.31Shop/Dealer Price$404.77 - $534.41
1998 Pontiac SunfireL4-2.2LService typeIntake Manifold Gaskets ReplacementEstimate$624.67Shop/Dealer Price$677.34 - $821.86
2001 Pontiac SunfireL4-2.4LService typeIntake Manifold Gaskets ReplacementEstimate$438.33Shop/Dealer Price$499.43 - $676.86
2005 Pontiac SunfireL4-2.2LService typeIntake Manifold Gaskets ReplacementEstimate$358.31Shop/Dealer Price$402.85 - $531.05
Show example Pontiac Sunfire Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(93)

Rating Summary
84
6
0
1
2
84
6
0
1
2

Troy

41 years of experience
107 reviews
Troy
41 years of experience
Pontiac Sunfire L4-2.2L - Car is not starting - Mesa, Arizona
Awesome service. Expert knowledge.

Kanstantsin

20 years of experience
192 reviews
Kanstantsin
20 years of experience
Pontiac Sunfire L4-2.2L - Car is not starting - Littleton, Colorado
Very Friendy and informative about my car

Jose

18 years of experience
433 reviews
Jose
18 years of experience
Pontiac Sunfire L4-2.2L - Car is not starting - Beaverton, Oregon
Good mechanic explained everything in detail

Sam

16 years of experience
123 reviews
Sam
16 years of experience
Pontiac Sunfire L4-2.2L - Gears slipping when accelerating - Oklahoma City, Oklahoma
He arrived on time and diagnosed the problem I was having. He was very professional and friendly.

Excellent Rating

(93)

Rating Summary
84
6
0
1
2
84
6
0
1
2
Number of Pontiac Sunfire services completed
1023+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 GMC Canyon
In In today’s world where it seems as if carmakers are determined to deliver only the largest vehicles possible, the 2012 GMC Canyon offers a compact pickup that holds its own. From a 4-cylinder that offers more horsepower than other...
A Buyer's Guide to the 2012 Mercedes-Benz GL350 BlueTec
If If you love a diesel engine in your SUV, but still want to ride around in luxury, your perfect vehicle may very well be the 2012 Mercedes-Benz GL350 BlueTec. Key Features The most important feature worth noting is the...
Plymouth Certified Pre-Owned (CPO) Car Program
Many Many drivers who are in the market for a used Plymouth vehicle want to consider a Certified Pre-Owned, or CPO, vehicle. CPO programs allow owners of used cars to drive with confidence, knowing that their vehicle has been inspected...

Car makes sound like muffler is loose.

Hi there. Noises can be deceiving; they resonate and are difficult to pinpoint. In a case like this, your best bet is to take your vehicle to a professional, such as a technician from YourMechanic to have it inspected (https://www.yourmechanic.com/services/75-point-safety-inspection)....

Truck running rough

Hello. If this only occurs when the engine is cold then you may have a sensor reading incorrectly or you may have a vacuum leak. Most of the time if the Check Engine Light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) is on I start by...

Problems putting in a spark plug in I had to thread the port for the plug now it won't stay in

You are supposed to thread the hole out and get all the material from cutting cleaned out of the hole and engine cylinder. After it is cleaned then you should clean the threads with brake cleaner that will dry quickly....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com