Pontiac Sunbird Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Pontiac Sunbird Wheel Bearings Replacement is $257 with $117 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Pontiac SunbirdV6-3.1LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$426.96Shop/Dealer Price$498.55 - $705.22
1993 Pontiac SunbirdL4-2.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$440.97Shop/Dealer Price$513.08 - $724.88
1990 Pontiac SunbirdL4-2.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$440.97Shop/Dealer Price$513.11 - $724.93
1990 Pontiac SunbirdL4-2.0L TurboService typeWheel Bearings - Driver Side Rear ReplacementEstimate$379.55Shop/Dealer Price$439.80 - $616.36
1990 Pontiac SunbirdL4-2.0LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$379.55Shop/Dealer Price$441.27 - $618.94
1993 Pontiac SunbirdL4-2.0LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$417.95Shop/Dealer Price$487.94 - $693.41
1994 Pontiac SunbirdL4-2.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$440.97Shop/Dealer Price$513.12 - $724.96
1993 Pontiac SunbirdL4-2.0LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$417.95Shop/Dealer Price$487.80 - $693.16
Show example Pontiac Sunbird Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

John

7 years of experience
35 reviews
John
7 years of experience
Pontiac Sunbird V6-3.8L - Car does not move when I step on the gas pedal Inspection - Renton, Washington
John was super awesome and honest. He showed and explained why I needed certain things and was very helpful in making a well informed decision. Highly reccomend him.

Joshua

28 years of experience
709 reviews
Joshua
28 years of experience
Pontiac Sunbird L4-2.0L - Ignition key does not turn - Oakland, California
Joshua was great. He arrived early which was a plus. He quickly resolved the problem and ordered the parts. I would recommend him to everyone. As a matter of fact while he was there attending my Mom's car, I had him to look at my car as well. He was wonderful and very professional.

Paul

11 years of experience
38 reviews
Paul
11 years of experience
Pontiac Sunbird L4-2.0L - Ignition Lock Assembly - Austin, Texas

Andrew

12 years of experience
962 reviews
Andrew
12 years of experience
Pontiac Sunbird L4-2.0L - Axle / CV Shaft Assembly Replacement (Driver Side Front) - Kansas City, Missouri
Very good experience with this service, Andrew was a true life saver. Will definitely be using this service again. I will definitely recommend this service to everyone that needs or could use it. Thank you

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Pontiac Sunbird services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Timing Chain
Common signs of a faulty timing chain include engine misfires, metal shavings found in the oil, and rattling sounds from the engine while idling.
How to Change a Car Battery
Changing your car battery is a simple and easy automotive repair that you can actually accomplish yourself with the right preparation and...
Disabled Driver Laws and Permits in Oregon
Residents Residents of Oregon who are disabled are entitled to obtain parking permits from the DMV in the State of Oregon. You can apply for placards, parking permits, and enjoy other privileges. The laws in the State of Oregon are...

it's turning over but not wanting to start.

Checking all the basics will usually locate the problem. You didn't mention whether you have verified good spark from the coil wire. Confirm that the plug wires are on right. That distributor turns clockwise, and the firing order is 1-6-5-4-3-2...

The clock in the car and light on the passenger airbag light

Hi there. Most of the time, the dimming and brightness of the dashboard lights (https://www.yourmechanic.com/article/how-to-repair-dashboard-lights-by-rocco-lovetere) are controlled by a switch on the vehicle's instrument panel or under the dash near the fuse box. In some cases, this dimming switch may...

Three warning lights are on - the check engine, battery, and immobilizer, and my car won't start.

The theft light being on will cause the no start. If you have a second key then you need to try it to see if it starts? If not then disconnect the battery for ten minutes with key out of...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com