Pontiac Firebird Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(138)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(138)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Pontiac Firebird Power Steering Pump Replacement is $231 with $91 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Pontiac FirebirdV6-3.1LService typePower Steering Pump ReplacementEstimate$520.28Shop/Dealer Price$583.57 - $758.03
1992 Pontiac FirebirdV8-5.0LService typePower Steering Pump ReplacementEstimate$371.77Shop/Dealer Price$430.05 - $600.76
1998 Pontiac FirebirdV6-3.8LService typePower Steering Pump ReplacementEstimate$528.39Shop/Dealer Price$608.52 - $842.67
1990 Pontiac FirebirdV8-5.0LService typePower Steering Pump ReplacementEstimate$430.17Shop/Dealer Price$489.21 - $660.50
1995 Pontiac FirebirdV6-3.4LService typePower Steering Pump ReplacementEstimate$401.51Shop/Dealer Price$452.13 - $592.77
1996 Pontiac FirebirdV8-5.7LService typePower Steering Pump ReplacementEstimate$655.08Shop/Dealer Price$732.60 - $953.92
1997 Pontiac FirebirdV8-5.7LService typePower Steering Pump ReplacementEstimate$655.08Shop/Dealer Price$732.28 - $953.37
1999 Pontiac FirebirdV8-5.7LService typePower Steering Pump ReplacementEstimate$607.30Shop/Dealer Price$672.52 - $857.74
Show example Pontiac Firebird Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(138)

Rating Summary
130
2
2
2
2
130
2
2
2
2

Matthew

28 years of experience
1146 reviews
Matthew
28 years of experience
Firebird 1967 - Brake Wheel Cylinder - Newport News, VA
Always a pleasure to have Matthew work on my car. I have learned so much from him about how to maintain my vehicle.

Matthew

28 years of experience
1146 reviews
Matthew
28 years of experience
Firebird 1967 - Brake Shoes (Rear) - Newport News, VA
Always a pleasure to have Matthew work on my car. I have learned so much from him about how to maintain my vehicle.

Anthony

25 years of experience
96 reviews
Anthony
25 years of experience
Firebird 1987 - Pre-purchase Car Inspection - St James, NY
More than accommodating. Went way out of his way to explain things and I felt he was very honest and actually caring for my situation. Thank you Sir You are trully a gentlemen

Anthony

5 years of experience
85 reviews
Anthony
5 years of experience
Firebird 1989 - Valve Cover Gasket - Citrus Heights, CA
He’s a dope mechanic and he gets the job done quick I would highly recommend to book your appointments through Anthony

Excellent Rating

(138)

Rating Summary
130
2
2
2
2
130
2
2
2
2
Number of Pontiac Firebird services completed
1518+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

P0073 OBD-II Trouble Code: Ambient Air Temperature Sensor Circuit High input
P0073 code definition Ambient Air Temperature Sensor Circuit High input Depending on the type of vehicle these are some related OBD-II Diagnostic...
P0011 OBD-II Trouble Code: Camshaft Position A - Timing Over-Advanced or System Performance (Bank 1)
P0011 code definition Camshaft Position “A” - Timing Over-Advanced or System Performance (Bank 1) What the P0011 code means P0011...
The Guide to Colored Curb Zones in New Mexico
Drivers Drivers in New Mexico have a number of parking regulations and laws they need to be aware of so they do not inadvertently park in the wrong location. If you park in a zone where you are not allowed,...

Grinding sound when stopping

The grinding noise could be anything as simple as a rock stuck in the backing plate behind the brake rotor to the wheel bearing. The steering wheel shake could be related, but the most common issue is an out of...

Vibration at highway speeds from 50mph and up

Hi there. What you're describing is typically an indication of damaged wheel bearings. One warning sign of a wearing out wheel bearing (https://www.yourmechanic.com/article/symptoms-of-bad-or-failing-wheel-bearings) is a loud grinding or roaring sound that comes from the tire area of your car. This...

Hello my car wouldn't start yesterday morning so I jump started it fine, drove home about 30 miles then throughout the evening I tried starting it and it started everytime, woke up this morning to try start the car and it won't start again

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com