Oldsmobile Intrigue Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(66)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(66)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Oldsmobile Intrigue Wheel Bearings Replacement is $327 with $145 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Oldsmobile IntrigueV6-3.5LService typeWheel Bearings - Driver Side Front ReplacementEstimate$491.06Shop/Dealer Price$568.13 - $788.81
2000 Oldsmobile IntrigueV6-3.5LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$479.35Shop/Dealer Price$554.12 - $773.08
1999 Oldsmobile IntrigueV6-3.8LService typeWheel Bearings - Driver Side Front ReplacementEstimate$479.35Shop/Dealer Price$554.15 - $773.14
2002 Oldsmobile IntrigueV6-3.5LService typeWheel Bearings - Driver Side Front ReplacementEstimate$479.35Shop/Dealer Price$554.15 - $773.13
1999 Oldsmobile IntrigueV6-3.5LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$479.35Shop/Dealer Price$556.07 - $776.49
1998 Oldsmobile IntrigueV6-3.8LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$572.91Shop/Dealer Price$671.28 - $960.57
2002 Oldsmobile IntrigueV6-3.5LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$572.91Shop/Dealer Price$671.12 - $960.29
1999 Oldsmobile IntrigueV6-3.8LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$572.91Shop/Dealer Price$671.10 - $960.25
Show example Oldsmobile Intrigue Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(66)

Rating Summary
61
4
1
0
0
61
4
1
0
0

Scott

37 years of experience
995 reviews
Scott
37 years of experience
Oldsmobile Intrigue V6-3.5L - Crankshaft Position Sensor - Scottsdale, Arizona
Obviously, my experience with Scott was great or I wouldn't be making another appointment with him for Feb 12 to do more work on my 2001 Olds Intrigue. I had asked for him specifically because of him his work ethic in the first meeting..

Chris

27 years of experience
126 reviews
Chris
27 years of experience
Oldsmobile Intrigue V6-3.5L - Crankshaft Position Sensor - Sacramento, California
One of the best mechanic literally showed up in the rain with no complaints and got the job done and a timely fashion.

Brian

24 years of experience
818 reviews
Brian
24 years of experience
Oldsmobile Intrigue V6-3.8L - Check Engine Light is on - Jacksonville, Florida
A bit behind schedule, but that can't be helped at times.. Excellent work. I'm very satisfied.

Scott

37 years of experience
995 reviews
Scott
37 years of experience
Oldsmobile Intrigue V6-3.5L - Thermostat - Mesa, Arizona
He answered all questions, and gave me options, i would use him again, keep up the great work!

Excellent Rating

(66)

Rating Summary
61
4
1
0
0
61
4
1
0
0
Number of Oldsmobile Intrigue services completed
726+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

Is It Safe to Drive With a Broken Axle?
Without two operational axles, your car won’t be going much of anywhere. They’re what transfers power to the wheels from the transmission (in...
How to Replace a Fuel Pressure Regulator
Fuel pressure regulators helps the fuel injector let out the right amount of fuel and maintains constant fuel pressure for optimal fuel usage.
How to Pick the Right Trailer Hitch for Your Car
Before Before attaching a trailer to your vehicle, you will need to make sure that you have the proper trailer hitch (https://www.yourmechanic.com/article/3-essential-things-to-know-about-trailer-hitches) installed on the back of your car or truck. Having the right trailer hitch is an absolute necessity...

Car overheats, but radiator full

It is possible that there is air trapped in the cooling system. Please note: never service the cooling system when the engine is hot, or the cooling system is pressurized, as serious injury can occur. Ford has a special tool...

Car is not starting and overheating

Hi there. Usually if the engine starts to overheat it won't damage your cylinder heads unless excessive overheating has occurred. However, if the engine overheated, coolant that may have spilled over may have caused an ignition system issue that's preventing...

Check engine light was on and now temperature gauge go hot ? i replace the thermostat but still go hot .help ?

It sounds like you may have a number of issues going on. Overheating can be caused by a number of things such as low coolant levels, a faulty thermostat (https://www.yourmechanic.com/services/thermostat-replacement), a clogged radiator (https://www.yourmechanic.com/services/radiator-replacement) or a failing coolant fan switch....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com