Oldsmobile Delta 88 Clunking or knocking noise from wheels Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(11)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(11)

Clunking or knocking noise from wheels Inspection Service

How much does a Clunking or knocking noise from wheels Inspection cost?

On average, the cost for a Oldsmobile Delta 88 Clunking or knocking noise from wheels Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1984 Oldsmobile Delta 88V8-5.0LService typeClunking or knocking noise from wheels InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1979 Oldsmobile Delta 88V6-3.8LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1978 Oldsmobile Delta 88V8-6.6LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1980 Oldsmobile Delta 88V6-3.8LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1979 Oldsmobile Delta 88V8-6.6LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1989 Oldsmobile Delta 88V6-3.8LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1971 Oldsmobile Delta 88V8-7.5LService typeClunking or knocking noise from wheels InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1973 Oldsmobile Delta 88V8-7.5LService typeClunking or knocking noise from wheels InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Oldsmobile Delta 88 Clunking or knocking noise from wheels Inspection prices

Clunking or knocking noises can be very disconcerting for any driver to hear while they are going down the road. While these noises may be a symptom of some different issues, all are usually related to a suspension component that has failed. When a suspension component has failed, the ride or the vehicle may be altered. If the failed component is not dealt with, it can lead to increasingly difficult and dangerous problems.

How this system works:

Your vehicle’s suspension system is designed to minimize friction between the tires and the road, ensuring a comfortable ride for you and your passengers. Many of the components that may cause a clunking or knocking noise are not only a part of the suspension, but help control the steering of the vehicle. Any issues regarding the steering or suspension of the vehicle should be looked at by a mechanic as they will only become worse over time.

Common reasons for this to happen:

  • Bad Ball Joints: Ball joints connect the vehicle’s wheel hubs to the rest of the suspension components. Depending on the vehicle, one or two ball joints per wheel and may or may not be load bearing. If a ball joint is beginning to fail, you may notice a clunking noise coming from the front wheels. This clunking noise will become louder and more frequent over time. You may also notice that your steering has been affected by the bad ball joint, potentially causing vibration in the steering wheel.

  • Bad Sway Bar Link: A vehicle’s sway bar or anti-roll bar, helps reduce body roll while cornering. Sway bars can help keep a vehicle from rolling over when going around a sharp corner. If the sway bar breaks or is damaged it may produce a clunking or knocking sound, especially when going over bumps. Your vehicle may also had more difficulty handling when the sway bar is damaged.

  • Bad Tie Rods: Tie rods connect a vehicle’s steering rack to the steering arm. This helps translate the turning of the steering wheel to the direction of the tires. When a tie rod end is worn or loose, they may produce a clunking noise. Worn tie rod ends may also cause more play in the steering wheel, making turning more vague.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason for the clunking or knocking noise from the wheels. The mechanic will then provide a detailed inspection report outlining the reason for the noise and the cost of any repairs that need to be made.

How it's done:

Telling a mechanic about any unusual sensations, in addition to the clunking or knocking noise, you may have observed, will help him or her understand what went wrong with the vehicle.

The mechanic will begin by lifting the front of the vehicle off the ground and shaking the front tires to check for play. If there is play in the front tires, the mechanic will suspect bad ball joints. The mechanic will then remove the wheel and the control arm(s) in order to access the faulty ball joint. He or she will then remove the old ball joint and replace it with a new one. The mechanic should also ensure that the new ball joint is properly lubricated in order to ensure longer life.

If the mechanic suspects that the sway bar has gone bad, the mechanic will begin by examining the sway bar bushings. If the entire sway bar appears to be in tact the bushing may cause the clunking noise. The mechanic will then replace the bushings and the sway bar if necessary.

If the mechanic suspects the tie rods, he or she will examine the tie rods for damage. If the tie rod end had become worn or loose, the mechanic will remove it and replace it with a new one. The mechanic will also ensure after installation, that the new tie rod end is properly lubricated.

In all repairs, the mechanic will make sure after completing the necessary repairs that the car handles properly. He or she should ask to test drive the vehicle to ensure this.

How important is this service?

Suspension and steering components that have gone bad will only get worse over time. If you notice that your car is not handling well or that it has started producing a clunking or knocking noise, you should have it inspected by a mechanic. Issues with suspension and steering components could also lead to other issues, like prematurely worn tires. Being vigilant about repairs to these components can help ensure long-life for your vehicle.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(11)

Rating Summary
10
0
0
1
0
10
0
0
1
0

Kenneth

20 years of experience
777 reviews
Kenneth
20 years of experience
Oldsmobile Delta 88 V8-5.7L - Thermostat Housing Gasket - Torrance, California
Extremely knowledgeable and conscientious. Makes sure the job gets done right!

Godwin

24 years of experience
253 reviews
Godwin
24 years of experience
Oldsmobile Delta 88 V6-3.8L - Pre-purchase Car Inspection - Temple City, California
Punctual, friendly, and knowledgeable. Godwin was amazing.

Chris

22 years of experience
2229 reviews
Chris
22 years of experience
Oldsmobile Delta 88 V6-3.8L - Adjust Drive Belts - Laguna Hills, California
Chris was on scheduled time, he corrected my car's problem. I will definitely use your services in the future. Your company is now in my Bookmarks and I will recommend your services to my friends.

Chris

22 years of experience
2229 reviews
Chris
22 years of experience
Oldsmobile Delta 88 V6-3.8L - Power Window Switch Replacement (Driver Side Front) - Laguna Hills, California
Have used Chris on at least 4 occasions. He is a competent and well above average mechanic.

Excellent Rating

(11)

Rating Summary
10
0
0
1
0
10
0
0
1
0
Number of Oldsmobile Delta 88 services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

Is it Safe to Drive With an EVAP Leak?
While it is safe to drive with an EVAP system leak, it causes excess car pollution. Fixing the problem is often as simple as tightening the gas cap.
What type of vehicle is right for you?
Sedans, coupes, convertibles, minivans, crossovers, hatchbacks, station wagons, SUVs, and pickups. Let us help you decide which to choose.
P0392 OBD-II Trouble Code: Camshaft Position Sensor "B" Circuit Low (Bank 2)
Trouble code P0392 means there is incorrect voltage or waveform from the camshaft position sensor circuit in engine bank 2.

Why won't my windshield wipers stop?

Hello, thank you for writing in. The vehicle may be having issues with the wiper motors, or the switch. There will need to be some electrical testing done on the vehicle to properly determine which component is responsible for the...

Vehicle is getting hot after 10 minutes of driving.

If you are referring to the metal radiator pressure cap, leaving that cap off will cause coolant loss and overheating. Leaving the plastic cap off of the plastic overflow reservoir may cause coolant loss if the overflow pick-up tube is...

Installed mew battery in 06 trailblazer now it wont start it cranks but wont start

This may be related to many different possibilities, some of which may be related to a lack of spark or possibly timing issues and some of which may be related to a fuel delivery problem or a combination of both....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com