Oldsmobile Bravada Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(33)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(33)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Oldsmobile Bravada Power Steering Pressure Hose Replacement is $224 with $70 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Oldsmobile BravadaV6-4.3LService typePower Steering Pressure Hose ReplacementEstimate$310.10Shop/Dealer Price$348.96 - $456.63
2002 Oldsmobile BravadaL6-4.2LService typePower Steering Pressure Hose ReplacementEstimate$1046.05Shop/Dealer Price$1203.57 - $1663.76
1998 Oldsmobile BravadaV6-4.3LService typePower Steering Pressure Hose ReplacementEstimate$334.85Shop/Dealer Price$380.46 - $512.69
2003 Oldsmobile BravadaL6-4.2LService typePower Steering Pressure Hose ReplacementEstimate$1046.05Shop/Dealer Price$1203.64 - $1663.88
1992 Oldsmobile BravadaV6-4.3LService typePower Steering Pressure Hose ReplacementEstimate$311.01Shop/Dealer Price$352.28 - $467.84
2001 Oldsmobile BravadaV6-4.3LService typePower Steering Pressure Hose ReplacementEstimate$300.19Shop/Dealer Price$337.29 - $443.64
1991 Oldsmobile BravadaV6-4.3LService typePower Steering Pressure Hose ReplacementEstimate$311.01Shop/Dealer Price$350.67 - $465.04
1997 Oldsmobile BravadaV6-4.3LService typePower Steering Pressure Hose ReplacementEstimate$334.85Shop/Dealer Price$380.46 - $512.68
Show example Oldsmobile Bravada Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(33)

Rating Summary
28
1
1
1
2
28
1
1
1
2

Manuel

23 years of experience
14 reviews
Manuel
23 years of experience
Oldsmobile Bravada L6-4.2L - Car Battery Replacement - Albuquerque, New Mexico
A great guy, Fast and efficient.

Scott

35 years of experience
41 reviews
Scott
35 years of experience
Oldsmobile Bravada V6-4.3L - Car is not starting - Olympia, Washington
Scott’s inspection was very detailed and complete. Since I have been repairing automobile engines for over 60 years, I know what a complete inspection includes. I had previously looked at the same set of issues in attempting to find the source of my erratic gremlin. Scott identified several issues, however he agreed that he has not solved my gremlin issue. My 2000 Oldsmobile Bravada starts reliably 80 percent of the time . The other 20 percent of the time on a seemingly random basis the engine turns over but will not start. Their company is reviewing sending an alternate mechanic.

Aaron

30 years of experience
132 reviews
Aaron
30 years of experience
Oldsmobile Bravada V6-4.3L - Idler Arm - Tallahassee, Florida
Aaron's work was great; He was on time and worked hard to get the job done.

Joseph

21 years of experience
718 reviews
Joseph
21 years of experience
Oldsmobile Bravada V6-4.3L - Exterior Door Handle Trunk - West Jordan, Utah
Very knowledgeable friendly and did excellent work

Excellent Rating

(33)

Rating Summary
28
1
1
1
2
28
1
1
1
2
Number of Oldsmobile Bravada services completed
363+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing AC Receiver Dryer
If you see signs of refrigerant leakage, hear rattling noises, or smell mold coming from the AC, you may have to replace the AC receiver dryer.
What are the Car Pool Rules in Oklahoma?
Car Car pool lanes were introduced to American road a few decades ago, and have been rising in popularity ever since. A large number of states have these lanes, and they cover more than 3,000 miles across the country. Many...
How to Renew Your Car Registration in New Jersey
Living Living in New Jersey comes with a variety of advantages. The great roadways and bridges that are a part of this state’s landscape are funded by the hard working men and women who live there. One of the main...

4x4 won't engage and push button switch lights up intermittently.

Hi there. Check the electrical wiring to the transfer case shifter motor and see if there is a voltage present when pushing on the 4WD button. If there is a voltage present, then I recommend replacing the servo motor on...

My 1990 Montero shifter is hard to get out of park also is hard to push shifter into park, it has to be forced into and out of park.

Jeep grand cherokee ecodiesel limited 2015

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com