Nissan Xterra Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(686)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(686)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Nissan Xterra Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Nissan XterraV6-3.3LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2003 Nissan XterraV6-3.3L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2015 Nissan XterraV6-4.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2009 Nissan XterraV6-4.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2002 Nissan XterraV6-3.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2004 Nissan XterraV6-3.3L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2004 Nissan XterraL4-2.4LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2001 Nissan XterraL4-2.4LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Nissan Xterra Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(686)

Rating Summary
639
21
6
7
13
639
21
6
7
13

Tyler

27 years of experience
178 reviews
Tyler
27 years of experience
Nissan Xterra V6-4.0L - Windows - Houston, Texas
Great timely, professional, and quality service.

Chris

22 years of experience
2229 reviews
Chris
22 years of experience
Nissan Xterra V6-3.3L - Radiator - Mission Viejo, California
Chris is knowledgeable and courteous as usual. Very helpful

Andrew

15 years of experience
506 reviews
Andrew
15 years of experience
Nissan Xterra V6-4.0L - Tire Rotation - Portland, Oregon
Andrew had good communication and assisted with everything I needed.

Galen

27 years of experience
35 reviews
Galen
27 years of experience
Nissan Xterra V6-3.3L - Coolant is leaking - Orangevale, California
Galen was very professional. Called to confirm and was 5 min early. Thoroughly explained what was wrong with my car, and what might have caused the problems. Very pleasant experience.

Excellent Rating

(686)

Rating Summary
639
21
6
7
13
639
21
6
7
13
Number of Nissan Xterra services completed
7546+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

How Long Should It Take a Heater to Warm Up in Cold Weather
When When you turn on your car’s heater, it should start blowing warm air. If the engine is already at operating temperature, this should happen immediately. However, if your engine is cold, it will take longer and if the weather...
Symptoms of a Bad or Failing Blower Motor Switch
If your blower motor switch only works on certain settings, gets stuck, or has a broken knob, you may need to replace your blower motor switch.
How to Buy a Personalized License Plate in West Virginia
Personalized Personalized license plates (https://www.yourmechanic.com/article/how-to-find-out-which-license-plates-are-available-in-your-state-by-brady-klopfer) add a special touch to your vehicle. It is an inexpensive way to make your vehicle a little more personal without performing any lasting modifications to your car. Personalized license plates are used by many...

How do I release the parking brake?

The parking brake is a very important safety feature that helps keep your car from rolling when it is parked. However, it is very harmful to your vehicle to drive with the parking brake on. You should always release the...

Check Engine code 0024

There are quite a few things that can cause this. Your car has variable valve timing; a complex system in which to change the cam timing. It uses oil pressure to advance or retard the timing. The oil pressure is...

My 2002 Ford Crown Victoria is acting like it want to go, even though I'm not pressing on the gas

Hello. The most common cause of the high engine idle accompanied with a delayed acceleration will be a vacuum leak in most cases. This engine gets vacuum leaks (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-a-vacuum-leak) on the vacuum connection on the intake manifold (https://www.yourmechanic.com/services/intake-manifold-gaskets-replacement) for the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com