Nissan Pathfinder Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(70)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(70)

Brake Pad Replacement Estimate for Nissan Pathfinder

Nissan Pathfinder Brake Pad Replacement costs $176 on average.

CarServiceEstimateShop/Dealer Price
2009 Nissan PathfinderV8-5.6LService typeBrake Pads - Rear ReplacementEstimate$247.03Shop/Dealer Price$296.19 - $415.77
1994 Nissan PathfinderV6-3.0LService typeBrake Pads - Rear ReplacementEstimate$235.03Shop/Dealer Price$285.45 - $405.98
2012 Nissan PathfinderV8-5.6LService typeBrake Pads - Rear ReplacementEstimate$227.03Shop/Dealer Price$276.21 - $395.80
2009 Nissan PathfinderV8-5.6LService typeBrake Pads - Front ReplacementEstimate$227.03Shop/Dealer Price$276.19 - $395.76
2001 Nissan PathfinderV6-3.5LService typeBrake Pads - Rear ReplacementEstimate$244.73Shop/Dealer Price$296.08 - $413.75
2001 Nissan PathfinderV6-3.5LService typeBrake Pads - Front ReplacementEstimate$227.03Shop/Dealer Price$276.21 - $395.80
2006 Nissan PathfinderV6-4.0LService typeBrake Pads - Rear ReplacementEstimate$232.03Shop/Dealer Price$281.07 - $400.56
2015 Nissan PathfinderL4-2.5L Turbo HybridService typeBrake Pads - Front ReplacementEstimate$247.55Shop/Dealer Price$299.12 - $419.68
Show example Nissan Pathfinder Brake Pad Replacement prices

Brake Pad Replacement Service

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(70)

Rating Summary
67
2
0
0
1
67
2
0
0
1

Chris

10 years of experience
31 reviews
Chris
10 years of experience
Pathfinder 2013 - Brake Pads - Ogden, UT
I was worried about booking a mechanic online. Chris was very professional and knowledgeable. I will definitely be using him again.

Dellano

13 years of experience
543 reviews
Dellano
13 years of experience
Pathfinder 2015 - Brake Pads - Laurel, MD
I came to Your Mechanic with a list of repairs and services that the dealership recommended for my vehicle. Mr. Bernard was very attentive to my questions and took time to provide explanations in an easy to understand way, about the services he rendered. He checked the different systems and let me know which were not necessary. I saved money by going with Your Mechanic, and with the warranty that's provided with the work, I can rest easy.

Chris

10 years of experience
31 reviews
Chris
10 years of experience
Pathfinder 2013 - Axle / CV Shaft Assembly - Ogden, UT
I was worried about booking a mechanic online. Chris was very professional and knowledgeable. I will definitely be using him again.

Gustavo

15 years of experience
12 reviews
Gustavo
15 years of experience
Pathfinder 2001 - Alternator - Glen Ridge, NJ
Very helpful mechanic, definitely would recommend. Took the time to diagnose issue and show me the result.

Excellent Rating

(70)

Rating Summary
67
2
0
0
1
67
2
0
0
1
Number of Nissan Pathfinder Brake Pads Replacement services completed
770+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Courtesy Light Bulb
If your car's courtesy light, also known as the dome light, is dim, flickering, or not working at all, you may need to replace its bulb.
P2761 OBD-II Trouble Code: Torque Converter Clutch Pressure Control Solenoid Control Circuit/Open
P2761 P2761 trouble code definition The P2761 code relates to the control solenoid valve assembly’s function within the torque converter clutch (TCC), which eliminates efficiency loss of fluid coupling by locking the two parts of the torque converter together when...
P2784 OBD-II Trouble Code: Input/Turbine Speed Sensor A/B Correlation
P2784 means a signal from the turbine speed sensor was detected due to electrical issues, faulty sensors or solenoids or bad transmission fluid.

MAF change during cold weather with a P01P0 code on a 2011 Nissan Altima

On a cold day, electronics have a tendency of being affected the most. MAF sensor wires are only 5-volt and only have a tiny amount of power, around 15 to 30 millivolts which is a thousandth of a volt. At...

Rear end noise when hitting bumps

Hello there, a noise such as this can have many different faults for your 2007 Chevrolet Aveo5. Given that the Aveo is a front-wheel drive vehicle, there are no drive components in the rear. The most common faults would be...

What does it mean when your charging system failure light comes on out of no where while driving?

Hello, thank you for writing in. The vehicle is detecting an issue with the alternator or the battery. When supplied power from the system is too low or too high, the monitoring system will alarm you. You should have the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com