Nissan NV200 Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Nissan NV200 Wheel Bearings Replacement is $255 with $151 for parts and $104 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Nissan NV200L4-2.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$485.34Shop/Dealer Price$576.69 - $814.71
2015 Nissan NV200L4-2.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$453.34Shop/Dealer Price$544.71 - $782.76
2018 Nissan NV200L4-2.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$429.45Shop/Dealer Price$521.71 - $773.69
2014 Nissan NV200L4-2.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$453.34Shop/Dealer Price$544.68 - $782.69
2018 Nissan NV200L4-2.0LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$432.63Shop/Dealer Price$522.96 - $764.59
2016 Nissan NV200L4-2.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$453.34Shop/Dealer Price$544.71 - $782.75
2014 Nissan NV200L4-2.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$461.34Shop/Dealer Price$552.49 - $790.37
2013 Nissan NV200L4-2.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$461.34Shop/Dealer Price$553.09 - $791.42
Show example Nissan NV200 Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

John

36 years of experience
434 reviews
John
36 years of experience
Nissan NV200 L4-2.0L - Oil Change - Sacramento, California
John was awesome. Very fast and personable.

Theodore

16 years of experience
1587 reviews
Theodore
16 years of experience
Nissan NV200 L4-2.0L - Oil Change - Redmond, Washington
appreciated the thorough work

Adam

17 years of experience
230 reviews
Adam
17 years of experience
Nissan NV200 L4-2.0L - Oil Change - West Palm Beach, Florida
Very trust worthy, always on time & tells me what needs to be done or when they should be done. The best couldn`t ask for a better mechanic. Keep up the great work, Adam Thanks, again!!!

Daniel

9 years of experience
42 reviews
Daniel
9 years of experience
Nissan NV200 L4-2.0L - Serpentine/Drive Belt - Weston, Florida
High professional, very knowledgable and very friendly guy, would recommend him to anybody.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Nissan NV200 services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

What Is the Difference Between a Water-Cooled Engine and an Air-Cooled Engine?
There There are a few main differences between a water-cooled and air-cooled engine. Air-cooled engines utilize an engine cylinder design that incorporates cooling fins all the way around the cylinder and on top of the piston cylinder head. These fins...
How to Buy a Good Quality Rotor
The The rotor exists to send power from your ignition coil over to your spark plugs – which make sure that your plugs ignite to start the fuel combustion process. Each time it goes around, the metal parts of the...
How to Dispose of Transmission Fluid
Transmission fluid needs to be changed at regular intervals. Old transmission fluid is recyclable. Proper disposal helps reduce overall waste.

Can a leaking intake manifold cause surging on my 93 Chevy Silverado 1500

Hello. A leaking intake manifold gasket can definitely cause the vehicle to run like this. It will not only cause excessive amounts of air to enter the engine, but it will also cause the sensors to not read right. It...

starter switch replaced and do you have the computer to reset it. Also need help to put my new gas tank in. I have taken all bolts

Hello. After replacing the ignition switch on your vehicle you should be able to reprogram it manually. Putting the key into the ignition and leaving it there for a few seconds until an indicator comes up on the dashboard saying...

Backfiring, poor mileage, and hesitation

If the engine in your car is original, at 25 years old, you might want to check compression to see what the basic mechanical condition of the engine is. Poor gas mileage can be caused by low tire pressure; faulty...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com