Nissan LEAF Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(108)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(108)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Nissan LEAF Car Thermostat Replacement is $300 with $104 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Nissan LEAFElectricService typeCar Thermostat ReplacementEstimate$1485.26Shop/Dealer Price$1807.37 - $2762.34
2015 Nissan LEAFElectricService typeCar Thermostat ReplacementEstimate$998.29Shop/Dealer Price$1199.33 - $1796.68
2014 Nissan LEAFElectricService typeCar Thermostat ReplacementEstimate$998.29Shop/Dealer Price$1199.36 - $1796.74
2017 Nissan LEAFElectricService typeCar Thermostat ReplacementEstimate$413.29Shop/Dealer Price$468.11 - $626.74
2013 Nissan LEAFElectricService typeCar Thermostat ReplacementEstimate$998.29Shop/Dealer Price$1201.42 - $1800.35
2012 Nissan LEAFElectricService typeCar Thermostat ReplacementEstimate$1472.65Shop/Dealer Price$1792.51 - $2745.80
2018 Nissan LEAFElectricService typeCar Thermostat ReplacementEstimate$413.29Shop/Dealer Price$468.13 - $626.78
2016 Nissan LEAFElectricService typeCar Thermostat ReplacementEstimate$998.29Shop/Dealer Price$1199.36 - $1796.74
Show example Nissan LEAF Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(108)

Rating Summary
94
6
1
0
7
94
6
1
0
7

Lee

39 years of experience
294 reviews
Lee
39 years of experience
Nissan LEAF Electric - Wheel Stud Replacement (Passenger Side Front) - Oklahoma City, Oklahoma
Very friendly and quick, he was in and out in no time with quality work.

Ramon

8 years of experience
184 reviews
Ramon
8 years of experience
Nissan Altima L4-2.5L - Thermostat - Los Angeles, California
Awesome experience again thanks so much!

Tyler

28 years of experience
178 reviews
Tyler
28 years of experience
Nissan Altima L4-2.5L - Thermostat - Houston, Texas
Very friendly , explained what he was going to be doing . Have recommended him to several people based on his service

Daniel

10 years of experience
51 reviews
Daniel
10 years of experience
Nissan Maxima V6-3.5L - Thermostat - Las Vegas, Nevada
Daniel was right on time. He was very friendly and knowledgeable in his profession. Daniel answered all of my questions and most of all he did a good job. Normally, I try to do all of my auto repairs myself. However, there are always those times when the repair is beyond my knowledge and skill. On these occasions I will call 'Your Mechanic" to do the work for me. I'm glad that I found "My Mechanic."

Excellent Rating

(108)

Rating Summary
94
6
1
0
7
94
6
1
0
7
Number of Nissan Car Thermostat Replacement services completed
1188+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

How to Renew Your Car Registration in New Hampshire
With With all of the benefits that come along with living New Hampshire, in order to drive in this state legally, you will have to take the time to register your car with the New Hampshire DMV. Once you have...
How Long Does a Strut Assembly Last?
Most Most modern cars on the road today use a combination of shocks and struts in the suspension system. Struts are used on the rear, while each front wheel is equipped with a strut assembly. Struts and shocks are pretty...
P0323 OBD-II Trouble Code: Ignition/Distributor Engine Speed Input Circuit Intermittent
Trouble code P0323 means the powertrain control module (PCM) detects an erratic signal from the crankshaft position sensor or the distributor.

What Can Cause a Car Heater or an AC to Stop Working?

There are several parts to both the heating and AC system referred to as the HVAC (heating ventilation and air conditioning system) in your automobile. Each unit has a liquid or medium to transport heat, a fan to blow the...

code p1518

Hello there, many faults will cause the P1518 code to be found on your Ford. Without the model and year I can only offer very general advice. The P1528 code is indicating that the intake manifold runner control fault stuck...

Why is my car a little jumpy when in reverse without any acceleration? Its not all the time either. Some days it reverses fine and

Hi Brandon. Thanks for contacting us today. The type of symptoms you are describing (with the reverse problems) are typically caused by obstruction of debris in the hydraulic lines of the transmission - so a flush and filter change is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com