Nissan Juke Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(125)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(125)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Nissan Juke Brake Master Cylinder Replacement is $309 with $176 for parts and $133 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 Nissan JukeL4-1.6L TurboService typeBrake Master Cylinder ReplacementEstimate$513.07Shop/Dealer Price$615.09 - $889.65
2011 Nissan JukeL4-1.6L TurboService typeBrake Master Cylinder ReplacementEstimate$485.07Shop/Dealer Price$587.11 - $861.69
2014 Nissan JukeL4-1.6L TurboService typeBrake Master Cylinder ReplacementEstimate$485.07Shop/Dealer Price$587.11 - $861.69
2016 Nissan JukeL4-1.6L TurboService typeBrake Master Cylinder ReplacementEstimate$814.25Shop/Dealer Price$998.55 - $1519.99
2015 Nissan JukeL4-1.6L TurboService typeBrake Master Cylinder ReplacementEstimate$485.07Shop/Dealer Price$587.13 - $861.73
2017 Nissan JukeL4-1.6L TurboService typeBrake Master Cylinder ReplacementEstimate$814.25Shop/Dealer Price$998.59 - $1520.05
2013 Nissan JukeL4-1.6L TurboService typeBrake Master Cylinder ReplacementEstimate$492.07Shop/Dealer Price$593.92 - $868.36
Show example Nissan Juke Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(125)

Rating Summary
121
0
1
0
3
121
0
1
0
3

Andrew

11 years of experience
841 reviews
Andrew
11 years of experience
Nissan Juke L4-1.6L Turbo - Serpentine/Drive Belt - Olathe, Kansas
Great job

Dan

39 years of experience
975 reviews
Dan
39 years of experience
Nissan Juke L4-1.6L Turbo - Pre-purchase Car Inspection - Buford, Georgia
very good

Rick

14 years of experience
25 reviews
Rick
14 years of experience
Nissan Juke L4-1.6L Turbo - Oil Change - San Jose, California

Johnny

33 years of experience
264 reviews
Johnny
33 years of experience
Nissan Juke L4-1.6L Turbo - Oil Change - Fair Oaks, California
Johnny arrived early and completed the services quickly and efficiently. He was polite and informative about my car’s needs. He never tried to upsell additional services which was a welcome relief from traditional car service experiences.

Excellent Rating

(125)

Rating Summary
121
0
1
0
3
121
0
1
0
3
Number of Nissan Juke services completed
1375+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

Should the Brake Fluid Be Flushed Every Time the Brakes Are Replaced?
While While it’s possible to get away with simply topping off your brake fluid with a brake replacement, Replacing the brakes is the ideal time to perform a brake fluid flush. For starters, you or your mechanic is already in...
Top 10 Tips for Buying a Car in College
Although Although college students may be known for attributes like drive, determination, and intelligence, one thing they aren’t known for is having disposable cash. So, when it comes time for a college guy or gal to buy a car, it’s...
Mississippi Parking Laws: Understanding the Basics
A A big part of the responsibility of driving is knowing where to park legally and safely. Mississippi drivers should take the time to understand the rules and laws of parking in the state and apply them. If they do...

How do I make the horn sound?

You may need to use your car horn to get the attention of other drivers. Locate the horn symbol on the center of your steering wheel. Press down on the area around the horn symbol to hear a sound. Tip...

The tire sems unsteady during driving

It is possible that you have a wheel bearing with some play or a loose tie rod or ball joint. Any suspension part that has a joint on it can have play and cause the wheel to wobble and make...

My car shakes and sometimes turns off.

The mechanic that looked at the vehicle is partly correct in that the repairs cannot be known until the problem can be verified and diagnosed. If the problem cannot be verified then you will have a hard time getting a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com