Nissan Frontier Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Nissan Frontier Wheel Bearings Replacement is $157 with $17 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Nissan FrontierL4-2.5LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$705.46Shop/Dealer Price$836.13 - $1217.61
2012 Nissan FrontierV6-4.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$771.55Shop/Dealer Price$929.77 - $1400.32
2013 Nissan FrontierV6-4.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$771.55Shop/Dealer Price$929.80 - $1400.36
2003 Nissan FrontierV6-3.3L TurboService typeWheel Bearings - Passenger Side Front ReplacementEstimate$278.76Shop/Dealer Price$293.03 - $329.15
2017 Nissan FrontierV6-4.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$771.55Shop/Dealer Price$931.27 - $1402.94
2016 Nissan FrontierV6-4.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$771.55Shop/Dealer Price$929.94 - $1400.61
2016 Nissan FrontierL4-2.5LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$736.15Shop/Dealer Price$885.56 - $1329.59
2005 Nissan FrontierV6-4.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$771.55Shop/Dealer Price$929.80 - $1400.36
Show example Nissan Frontier Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Chris

15 years of experience
546 reviews
Chris
15 years of experience
Frontier 2003 - Wheel Bearings - Vancouver, WA
Great quick worker done right

Richard

35 years of experience
8 reviews
Richard
35 years of experience
Frontier 2019 - Door Mirror - Land O' Lakes, FL
Showed up early. Got right to work, had repair done in no time. Was an awesome experience. Will definitely use again.

Kevin

7 years of experience
27 reviews
Kevin
7 years of experience
Frontier 2008 - Check Engine Light is on - Orlando, FL
He was on time, friendly, courteous, knowledgeable, and expertly diagnosed the problem. It is so hard to find a honest and trustworthy mechanic like this anymore. 

Gregory

10 years of experience
25 reviews
Gregory
10 years of experience
Frontier 2012 - Brake Pads - Fresno, CA
Was on time and professional knows what he's doing and will definitely use him again

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Nissan Frontier Wheel Bearings Replacement services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

How to Replace a Throttle Controller
The throttle controller uses data to open and close the throttle. Common signs of failure include poor performance, stalling, and and rough idling.
Is it Safe to Drive With a Donut Tire?
When one of your tires goes out, it is replaced with a donut tire (also called a spare tire, although...
How to Prepare for the Florida Driver’s Written Test
Are Are you excited to get your Florida driver’s permit so you can learn how to drive? It’s an exciting time, but you have to pass the state’s written exam before you are able to get your permit. Passing this...

on a chrysler 200 the airbag light goes on and off for Driver. Is there a way to get it to stop or disable?

Hi there. In most cases, the airbag light will go on or off if a sensor is damaged or has a loose connection or fitting. Unfortunately, it's a safety system that can't be disabled. It's probably a better idea to...

I asked yesterday with no response vfrom Your Mechanic. I too have the intermittent Airbag light on. I'd like a quote.

The warning light signifies a fault in the air bag control system. The recall that you are referring to addresses a circumstance where the Occupant Restraint Control (OCR) module on the recalled vehicles (your model year is included, but check...

Passlock reset on 2002 Chevrolet Impala

Unfortunately the dealer is oftentimes the only place that can perform services such as this. This is due to the fact that specific scan tools are required in order to reset certain systems.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com