Nissan D21 Oxygen Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(41)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(41)

Oxygen Sensor Replacement Service

How much does a Oxygen Sensor Replacement cost?

On average, the cost for a Nissan D21 Oxygen Sensor Replacement is $126 with $31 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1989 Nissan D21L4-2.4LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$524.11Shop/Dealer Price$636.39 - $950.73
1990 Nissan D21L4-2.4LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$634.03Shop/Dealer Price$778.81 - $1190.60
1993 Nissan D21L4-2.4LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$187.35Shop/Dealer Price$220.46 - $297.24
1990 Nissan D21L4-2.4LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$187.35Shop/Dealer Price$220.44 - $297.20
1993 Nissan D21V6-3.0LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$702.91Shop/Dealer Price$864.92 - $1328.39
1992 Nissan D21L4-2.4LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$187.35Shop/Dealer Price$220.46 - $297.24
1991 Nissan D21V6-3.0LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$639.03Shop/Dealer Price$783.67 - $1195.36
1994 Nissan D21V6-3.0LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$639.03Shop/Dealer Price$784.04 - $1196.02
Show example Nissan D21 Oxygen Sensor Replacement prices

What is the Oxygen Sensor all about?

With each new model year, manufacturers are adding more oxygen sensors to better manage engine operation. Some high performance engines have an oxygen sensor for each cylinder as well as one for the rear of each catalytic convertor. The sensors are located either underneath the hood or underneath the car. The oxygen sensors are connected (screwed) to the exhaust pipe, either in front or back of the catalytic converter. The front (upstream) sensors measure the amount of oxygen in the exhaust system. The purpose of the front oxygen sensor(s) is to measure how rich or lean the gases are as the gases exit the combustion chamber. Depending upon whether the exhaust gas is lean (high in oxygen content) or rich (low in oxygen content), the amount of fuel entering the engine is adjusted by the engine management computer to try and maintain an ideal mixture that produces the lowest emissions output from the catalytic convertor.

Rear (downstream) sensors are located behind the catalytic converter. The purpose of the rear oxygen sensor(s) is to monitor the oxygen content of the exhaust gases leaving the catalytic convertor.

If one or more of the oxygen sensors are faulty, your car may not pass the emissions test. If you drive your car with a faulty oxygen sensor, you may get poor gas mileage and it can damage the catalytic converter.

Oxygen Sensor-MATROX-1

When replacing the oxygen sensor remember:

  • Many oxygen sensors are damaged by leaking oil or coolant. If that is the case, the cause of that leak needs to be identified and repaired, or else the replacement oxygen sensor will be damaged as well.
  • New vehicles require specific oxygen sensors, and not the universal sensors that were common prior to 1996.

How it's done:

  • Scan the computer in the car for codes.
  • Inspect for vacuum leaks and holes in the exhaust system.
  • Remove and replace the oxygen sensor if it is bad.
  • Check electrical connections.
  • Check for proper operation of oxygen sensors.
  • Clear diagnostic codes.
  • Test drive car.

Our recommendation:

Keep up with the tune-ups. If check engine light is on, don't drive the car too long without getting it inspected. If check engine light is flashing, pull over and get the car towed to avoid costly repairs. Ask the mechanic to inspect the vacuum hoses and leaks in the exhaust system. If the vacuum hose or exhaust system is leaking, it will display an oxygen sensor fault code. Replacing an oxygen sensor may not fix the problem.

What common symptoms indicate you may need to replace the Oxygen Sensor?

  • Check Engine light is on.
  • Car is getting poor gas mileage.
  • Emission test fails.

How important is replacing the oxygen sensor?

Your vehicle has multiple oxygen sensors, and they all help the car run optimally. The front sensors measure how much oxygen is in the exhaust stream to measure how rich or lean the gases leaving the gas chamber are. The rear sensors measure the oxygen content of the gases as they leave the catalytic converter. The oxygen sensors then relay this information to your vehicle’s electronic control unit, so that it can adjust as necessary. Because cars depend on an ideal fuel-to-air ratio to function optimally, the oxygen sensors are leaned on for engine performance. When your oxygen sensors fail your car will run less smoothly, get worse mileage, and have worse emissions.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(41)

Rating Summary
38
1
0
0
2
38
1
0
0
2

Larry

15 years of experience
44 reviews
Larry
15 years of experience
D21 1990 - Radiator - Atlanta, GA
On time and very knowledgeable.

Eliud

20 years of experience
148 reviews
Eliud
20 years of experience
D21 1989 - Distributor - Grayson, GA
Best ever

Joel

25 years of experience
77 reviews
Joel
25 years of experience
D21 1989 - Idle Control Valve - Glendale, AZ
He was very informative about the problem and he was knowledgeable about the problem but unfortunately he wasn't able to fix it because the part was discontinued. I will definitely recommend his services to anyone. Thanks Merlyn

Chet

35 years of experience
613 reviews
Chet
35 years of experience
D21 1993 - Clutch Slave Cylinder - San Diego, CA
Chet was courteous and very knowledgeable. He completed the job in the estimated time and made some good recommendations for things that needed to be done.

Excellent Rating

(41)

Rating Summary
38
1
0
0
2
38
1
0
0
2
Number of Nissan D21 services completed
451+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

What Sensors Make the ABS Work?
When When we are discussing ABS systems it is good to note the year and make of your vehicle because ABS systems have evolved quite a bit over the years, but you also have to know how the ABS system...
How Do Rain-Sensing Wipers Work?
Several Several decades ago, the only settings windshield wipers came with were low, high, and off. Later, an intermittent wiper feature was integrated into many windshield wiper switches, allowing drivers to reduce the frequency of wiper movements based on the...
How Long Does an Injector Control Pressure Sensor Last?
A A diesel engine is a very sensitive and complicated piece of machinery. Getting a diesel to crank will require a number of parts to work together. Among the most vital systems on a diesel engine is the fuel injection....

How Often Does the Mass Air Flow Sensor Need to Be Replaced?

Mass airflow sensors (MAF) have no expiration date. They are not included on the manufacturer’s scheduled maintenance list of things to replace based on mileage, like spark plugs (https://www.yourmechanic.com/services/spark-plugs-replacement) or filters. They can remain in service indefinitely as long as...

Car will not start when the engine is hot.

Hi there. If there is fuel and the engine will not start up when it is at operating temperature, then either the crankshaft position sensor is getting hot and not making a connection or the coolant temperature sensor (https://www.yourmechanic.com/services/coolant-temperature-switch-sensor-replacement) is...

Fuel tank pressure sensor is bad. How do I check it?

Test the fuel rail pressure sensor, using a digital volt ohmmeter, as the engine is running. The meter should have a reading of 5-volts. If there is a 5 volt reading, then check the ground wire for a low resistance....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com