Nissan ARIYA Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(72)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(72)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Nissan ARIYA Control Arm Assembly Replacement is $368 with $228 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
* Nissan ARIYAElectricService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$642.84Shop/Dealer Price$761.37 - $1107.24
* Nissan ARIYAElectricService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$792.62Shop/Dealer Price$911.04 - $1256.84
* Nissan ARIYAElectricService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$602.83Shop/Dealer Price$718.90 - $1062.92
* Nissan ARIYAElectricService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$792.62Shop/Dealer Price$911.10 - $1256.93
* Nissan ARIYAElectricService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$632.03Shop/Dealer Price$750.24 - $1095.86
* Nissan ARIYAElectricService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$632.03Shop/Dealer Price$748.64 - $1093.06
* Nissan ARIYAElectricService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$632.03Shop/Dealer Price$748.49 - $1092.80
* Nissan ARIYAElectricService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$632.03Shop/Dealer Price$748.47 - $1092.77
Show example Nissan ARIYA Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(72)

Rating Summary
66
3
0
0
3
66
3
0
0
3

Peter

29 years of experience
592 reviews
Peter
29 years of experience
Nissan Altima L4-2.5L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - North Hollywood, California
Best experience with a mechanic ever. No problem whatsoever. The steering is so much better, and the engin sounds like brand new. It was joy driving back. Thank you Peter.

Edgar

9 years of experience
202 reviews
Edgar
9 years of experience
Nissan Maxima V6-3.5L - Control Arm Assembly Replacement (Front Upper Right) - Austin, Texas
A GREAT MECHANIC. ALWAY DOES A GREAT JOB. ALWAY ON POINT WITH WORK AND ABOUT THE JOB

Chris

15 years of experience
82 reviews
Chris
15 years of experience
Nissan Versa L4-1.6L - Control Arm Assembly Replacement (Front Lower Right) - Oklahoma City, Oklahoma
I believe Chris is a qualified mechanic. I was unhappy that he was an hour late.

Jamie

23 years of experience
132 reviews
Jamie
23 years of experience
Nissan Altima L4-2.5L - Control Arm Assembly Replacement (Front Lower Left) - Moreno Valley, California
Jamie was great. On time, excellent customer service and very knowledgeable.

Excellent Rating

(72)

Rating Summary
66
3
0
0
3
66
3
0
0
3
Number of Nissan Control Arm Assembly Replacement services completed
792+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

The Guide to Right-of-Way Laws in South Carolina
According According to the South Carolina Driver’s Manual (http://www.scdmvonline.com/DMVNew/forms/driver%20manual.pdf), “right of way” identifies who must yield and wait at intersections or anywhere else that it would be impossible for more than one vehicle or combination of pedestrians and vehicles to...
The Best Used Cars to Buy If You're a Fisherman
What What do anglers look for, specifically, in their vehicles? Lots of room, plenty of cargo space, and sometimes, the ability to handle rough terrain. Some fishermen also want the option of towing a boat. With that in mind, we...
B1862 OBD-II Trouble Code: Climate Control A/C Lock Sensor Failure
B1862 means there is a malfunction with the climate control A/C lock sensor, most likely due to a defective sensor or damaged electrical components.

What does the Vehicle Dynamic Control off switch do?

Your Altima is equipped with a stability and traction control system called the Vehicle Dynamic Control (VDC). The VDC system is designed to provide better traction during slippery driving by reducing engine output. This reduces wheel spin and can help...

I have a 1996 toyota tercel running & idling really rough. Trouble codes are: P0301, P0302, P0304, P0401 & P0402. Help please!?

Hi There, Codes P0301, P0302, P0304 relates to misfires in cylinders 1, 2, and 4. Codes P0401 and P0402 relate to the EGR valve (https://www.yourmechanic.com/services/exhaust-gas-recirculation-egr-valve-replacement) not functioning properly. The EGR valve is likely detecting that there is either a condition...

Car won't roll in drive or neutral

It could be a that you have a failure in your transmission or your final drive. Move the shifter through the gears and see if you can feel the transmission "torque up" in reverse or drive and then relax in...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com