Nissan 300ZX Distributor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(69)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(69)

Distributor Replacement Service

How much does a Distributor Replacement cost?

On average, the cost for a Nissan 300ZX Distributor Replacement is $597 with $429 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
Show example Nissan 300ZX Distributor Replacement prices

What is a distributor and how does it work?

The distributor is an electro-mechanical component installed in a car’s ignition system to provide, time, and “distribute” the spark that occurs at each spark plug in an engine’s combustion cylinders. The distributor contains a rotating shaft with a gear at the bottom that engages a gear on the engine’s camshaft. Atop the shaft is a plastic rotor that has electrical contacts molded in. As the plastic rotor turns, it completes a high voltage circuit to each electrical contact, one per engine cylinder, that is molded into a plastic distributor cap. That high voltage then flows along the spark plug wire to the spark plug, creating the spark that ignites the air-fuel mixture in an engine cylinder.

Distributors vary in design: some may have the ignition coil built in, some have vacuum advance mechanisms attached for engine timing, and really old distributors may even have mechanical points. Vintage cars, that is cars older than 25 years, will more commonly be equipped with a distributor. Most modern car designs have replaced the distributor with fully electronic systems controlled by engine sensors for more precise, and more powerful, ignition system operation.

When to consider replacing the distributor:

  • Worn or damaged integral parts. Worn shaft bushings can result in wobbling or eccentric rotation of the rotor, resulting in misfires, loss of power, rough idle and poor mileage. If the shear pin breaks that secures the distributor shaft drive gear, complete loss of ignition spark distribution is the result. A failed ignition module that is mounted to the distributor housing may also be more cost-performance efficient to replace the entire distributor.
  • Visible oil leaks. Distributors are attached to the engine and consequently, there are seals, both internal and external, that keep oil from leaking at the point of attachment. External O-rings are serviceable but if an internal oil leak occurs, due to a worn shaft, for example, it might necessitate rebuilding or replacing the distributor.

How do mechanics replace the distributor?

Distributors are bolted to the engine block or the cylinder head. The replacement procedure is as follows:

  • Once all diagnostic tests are complete and the distributor is confirmed to be faulty, disconnect the battery negative cable.
  • Set engine at top dead center on the compression stroke for cylinder no. 1. Mark location of distributor housing and shaft relative to the engine mounting surface.
  • Remove primary and secondary ignition system wiring connected to the distributor. Unbolt and remove the distributor. Temporarily cover the hole in the head or block so no foreign matter drops into the engine.
  • Install new distributor and new cap and rotor, with the rotor pointing to the cylinder no. 1 firing-order electrode of the distributor cap. Reconnect all wiring and reconnect battery negative cable.
  • Start engine and set basic engine ignition timing per original equipment manager specification. Then check timing advance for proper function. Road test vehicle.

Is it safe to drive with a distributor problem?

Yes. A faulty distributor will cause increased fuel consumption, increased emissions and poor engine operation but does not generally create a safety hazard.

When replacing a distributor keep in mind:

  • Many ignition system failures will mimic a distributor failure, including faulty spark plugs, faulty wiring, and a worn cap and rotor. Mechanics will always test the distributor directly to ensure it is not needlessly replaced.
  • If a distributor is removed for testing and then re-installed, be sure that new o-rings are installed. Re-using old o-rings often results in oil leaks.
  • If the distributor is replaced, and the spark plugs and spark plug wires have considerable mileage on them, the best results will be obtained by replacing those components at the same time the new distributor is installed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(69)

Rating Summary
63
2
0
0
4
63
2
0
0
4

Marco

30 years of experience
329 reviews
Marco
30 years of experience
Nissan 300ZX V6-3.0L - Car is overheating - Corona, California
Marco was very personable courteous. He also diagnosed my problem accurately. He said that my previous mechanic jerry-rigged a problem that I had several years ago and that the repair had finally failed. Good work Marco

Pardeep

22 years of experience
1277 reviews
Pardeep
22 years of experience
Nissan 300ZX V6-3.0L - Brake Pads Replacement (Front, Rear) - San Jose, California
.

Shaun

11 years of experience
542 reviews
Shaun
11 years of experience
Nissan 300ZX V6-3.0L - Clutch Slave Cylinder - Scottsdale, Arizona
Very knowledgeable, prompt and great communication.

Sebastian

6 years of experience
254 reviews
Sebastian
6 years of experience
Nissan 300ZX V6-3.0L - Car is not starting - West Palm Beach, Florida
Sebastian was professional and provided excellent service. He was thorough and went step by step until he found the problem with my vehicle.

Excellent Rating

(69)

Rating Summary
63
2
0
0
4
63
2
0
0
4
Number of Nissan 300ZX services completed
759+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

The Traveler’s Guide to Driving in Puerto Rico
Puerto Puerto Rico is a beautiful place that has a lot to offer vacationers. Since it is a commonwealth of the United States, there is no need to have a passport to visit, which can make vacationing easier. All you...
How Long Does an Ignition Ignitor Last?
The The ignition system of a car is responsible for kicking off the combustion process. Without the ignition coil on your car giving off the necessary spark, the air and fuel mixture in your engine will not be able to...
Dodge Certified Pre-Owned (CPO) Car Program
Drivers Drivers who are shopping around for a used Dodge vehicle may want to consider cars under the Dodge certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is set up differently. Read on to...

Power steering not working.

It does not sound very fun to drive your vehicle right now! Your Fusion uses an electrically assisted power steering system, rather the standard hydraulic power steering system that is found on most cars. After doing some research on the...

steady ticking sound from ac compressor

Hey there. The one in the video has a major problem with the pulley bearing getting ready to seize up. You can hear the noise when the A/C compressor turns off. These bearings will start to spin on the front...

When driving uphill the vehicle looses most of power,only goes 25 miles per hour,then shakes when restarting

Lack of power and shaking can be caused by a number of components. Misfiring can reduce power and cause shakes. Misfires can be ignition related like from bad spark plugs or ignition coils. Also from sensors such as the crankshaft...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com