Nissan 240SX Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(43)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(43)

Brake Pad Replacement Estimate for Nissan 240SX

Nissan 240SX Brake Pad Replacement costs $171 on average.

CarServiceEstimateShop/Dealer Price
1998 Nissan 240SXL4-2.4LService typeBrake Pads - Rear ReplacementEstimate$247.03Shop/Dealer Price$296.19 - $415.77
1995 Nissan 240SXL4-2.4LService typeBrake Pads - Front ReplacementEstimate$289.07Shop/Dealer Price$353.76 - $519.88
1992 Nissan 240SXL4-2.4LService typeBrake Pads - Front ReplacementEstimate$227.03Shop/Dealer Price$276.21 - $395.80
1990 Nissan 240SXL4-2.4LService typeBrake Pads - Front ReplacementEstimate$227.03Shop/Dealer Price$276.19 - $395.76
1996 Nissan 240SXL4-2.4LService typeBrake Pads - Rear ReplacementEstimate$227.03Shop/Dealer Price$276.22 - $395.83
1997 Nissan 240SXL4-2.4LService typeBrake Pads - Rear ReplacementEstimate$227.03Shop/Dealer Price$276.21 - $395.80
1989 Nissan 240SXL4-2.4LService typeBrake Pads - Front ReplacementEstimate$232.03Shop/Dealer Price$281.07 - $400.56
1989 Nissan 240SXL4-2.4LService typeBrake Pads - Rear ReplacementEstimate$240.53Shop/Dealer Price$291.21 - $411.93
Show example Nissan 240SX Brake Pad Replacement prices

Brake Pad Replacement Service

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(43)

Rating Summary
35
5
2
1
0
35
5
2
1
0

Ryan

12 years of experience
47 reviews
Ryan
12 years of experience
Nissan 240SX L4-2.4L - Clutch Master Cylinder - Chula Vista, California

Robert

31 years of experience
641 reviews
Robert
31 years of experience
Nissan 240SX L4-2.4L - Check Engine Light is on - San Jose, California
Only rated him a 5 star becuase thier was nothing higher i can rate hime like 100/100, freindly and knowledgable a Grade A mechanic would reccomend .

Matthew

11 years of experience
136 reviews
Matthew
11 years of experience
Nissan 240SX L4-2.4L - Pre-purchase Car Inspection - Las Vegas, Nevada
Very professional he called to let me know exactly what he found on the car he inspected and answered any questions I had

Amor

43 years of experience
181 reviews
Amor
43 years of experience
Nissan 240SX L4-2.4L - Engine idle speed is high Inspection - Milpitas, California
He was okay I wasn't all that satisfied but helped me fix my idle a bit.. But I needed help adjusting throttle position and just instructed me how rather than doing it for me..

Excellent Rating

(43)

Rating Summary
35
5
2
1
0
35
5
2
1
0
Number of Nissan 240SX services completed
473+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

Symptoms of Bad or Failing Air Shocks
If your car is riding less comfortably, nose dives when braking, or leans when turning, you may need to replace your air shocks.
How to Turn Off the Reverse Beep in a Prius
The The Toyota Prius is designed to shut off the engine when stopped as an energy-conserving measure. When the accelerator is depressed, it starts to back up, so you can go about your business on the road. When your Prius...
How Long Does a Trunk Lift Support Shocks Last?
For For most people, traveling is something that they do on a regular basis. There are a variety of things that are on a car that can help a person out when traveling. The trunk lift support shocks help to...

Serpentine belt, froze ac compressor

It is possible to bypass the compressor by removing the old compressor and installing a compressor bypass pulley. The pulley will bolt in the same location as the compressor. You may want to have the compressor pulley checked to see...

I have 2006 nissan altima 2.5 that keeps on burning my stater

Hi there. There are a few reasons as to why the starter will fail prematurely on your car. Most of the time it is caused by a failing crankshaft position sensor. When the sensor fails and reads incorrectly it can...

Need to replace front left CV axle, do I need to replace the CV boot as well?

Hello, thank you for writing in. The damage done to the unit will dictate what exactly needs to be done. If the entire CV axle on one side or the other needs to be replaced, then the entire shaft is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com