Mitsubishi Lancer Oxygen Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(3)

Oxygen Sensor Replacement Service

How much does a Oxygen Sensor Replacement cost?

On average, the cost for a Mitsubishi Lancer Oxygen Sensor Replacement is $257 with $117 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Mitsubishi LancerL4-2.0LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$394.96Shop/Dealer Price$458.55 - $641.22
2005 Mitsubishi LancerL4-2.0LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$385.95Shop/Dealer Price$447.77 - $629.12
2002 Mitsubishi LancerL4-2.0LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$413.51Shop/Dealer Price$482.25 - $684.28
2011 Mitsubishi LancerL4-2.0L TurboService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$866.75Shop/Dealer Price$1048.80 - $1590.76
2003 Mitsubishi LancerL4-2.0LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$413.51Shop/Dealer Price$483.72 - $686.86
2010 Mitsubishi LancerL4-2.4LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$379.55Shop/Dealer Price$439.94 - $616.61
2006 Mitsubishi LancerL4-2.0L TurboService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$386.47Shop/Dealer Price$448.46 - $630.23
2016 Mitsubishi LancerL4-2.4LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$1212.21Shop/Dealer Price$1480.62 - $2281.68
Show example Mitsubishi Lancer Oxygen Sensor Replacement prices

What is the Oxygen Sensor all about?

With each new model year, manufacturers are adding more oxygen sensors to better manage engine operation. Some high performance engines have an oxygen sensor for each cylinder as well as one for the rear of each catalytic convertor. The sensors are located either underneath the hood or underneath the car. The oxygen sensors are connected (screwed) to the exhaust pipe, either in front or back of the catalytic converter. The front (upstream) sensors measure the amount of oxygen in the exhaust system. The purpose of the front oxygen sensor(s) is to measure how rich or lean the gases are as the gases exit the combustion chamber. Depending upon whether the exhaust gas is lean (high in oxygen content) or rich (low in oxygen content), the amount of fuel entering the engine is adjusted by the engine management computer to try and maintain an ideal mixture that produces the lowest emissions output from the catalytic convertor.

Rear (downstream) sensors are located behind the catalytic converter. The purpose of the rear oxygen sensor(s) is to monitor the oxygen content of the exhaust gases leaving the catalytic convertor.

If one or more of the oxygen sensors are faulty, your car may not pass the emissions test. If you drive your car with a faulty oxygen sensor, you may get poor gas mileage and it can damage the catalytic converter.

Oxygen Sensor-MATROX-1

When replacing the oxygen sensor remember:

  • Many oxygen sensors are damaged by leaking oil or coolant. If that is the case, the cause of that leak needs to be identified and repaired, or else the replacement oxygen sensor will be damaged as well.
  • New vehicles require specific oxygen sensors, and not the universal sensors that were common prior to 1996.

How it's done:

  • Scan the computer in the car for codes.
  • Inspect for vacuum leaks and holes in the exhaust system.
  • Remove and replace the oxygen sensor if it is bad.
  • Check electrical connections.
  • Check for proper operation of oxygen sensors.
  • Clear diagnostic codes.
  • Test drive car.

Our recommendation:

Keep up with the tune-ups. If check engine light is on, don't drive the car too long without getting it inspected. If check engine light is flashing, pull over and get the car towed to avoid costly repairs. Ask the mechanic to inspect the vacuum hoses and leaks in the exhaust system. If the vacuum hose or exhaust system is leaking, it will display an oxygen sensor fault code. Replacing an oxygen sensor may not fix the problem.

What common symptoms indicate you may need to replace the Oxygen Sensor?

  • Check Engine light is on.
  • Car is getting poor gas mileage.
  • Emission test fails.

How important is replacing the oxygen sensor?

Your vehicle has multiple oxygen sensors, and they all help the car run optimally. The front sensors measure how much oxygen is in the exhaust stream to measure how rich or lean the gases leaving the gas chamber are. The rear sensors measure the oxygen content of the gases as they leave the catalytic converter. The oxygen sensors then relay this information to your vehicle’s electronic control unit, so that it can adjust as necessary. Because cars depend on an ideal fuel-to-air ratio to function optimally, the oxygen sensors are leaned on for engine performance. When your oxygen sensors fail your car will run less smoothly, get worse mileage, and have worse emissions.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mitsubishi mechanics

Real customer reviews from Mitsubishi owners like you.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of Mitsubishi Lancer Oxygen Sensor Replacement services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mitsubishi MECHANICS
800+
experts on our platform

Recent articles & questions

How to Replace a Car Battery Temperature Sensor
The battery has a battery temperature sensor that can fail if the Check Engine Light comes on, the battery voltage is low, or the RPM curve surges.
How to Replace an EVP Position Sensor
The EGR valve is monitored by a valve position sensor. This sensor helps your car's EGR system to run more efficiently and better control emissions.
How Air Bags Work
Designed Designed to protect the occupants of a vehicle in the case of an accident, air bags inflate when the vehicle collides with another object, or otherwise suffers a sudden deceleration. Absorbing the energy of the impact, vehicle owners need...

EVAP Small Leak Code P0442 Lit MIL. Code cleared, has not reappeared. But, Diagnostic tool still shows Emission Related DTC's

In order for all the monitors to clear you will have to do a lot of driving to see if it clears. The last two to clear take highway driving at a steady speed to clear and may take a...

How can I test an abs sensor to make sure its good

Depending on the vehicle you can do an ohms test if you know the correct reading you should get (about 25 ohms on some vehicles). However, the best method for checking the ABS speed sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-abs-speed-sensor) is to use a...

There is a strong knocking sound coming from the engine. Today my car won't start. Service engine light is on. It keeps turning over

Hi there. When the crankshaft position sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-crankshaft-position-sensor) is damaged or faulty, it will cause intermittent starting issues, misfiring problems, or might cause the vehicle to fail to start entirely. The best way to resolve this issue is to contact...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com