Mitsubishi Eclipse Cross Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(11)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(11)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a Mitsubishi Eclipse Cross Water Pump Replacement is $735 with $315 for parts and $420 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Mitsubishi Eclipse CrossL4-1.5L TurboService typeWater Pump ReplacementEstimate$1094.56Shop/Dealer Price$1262.75 - $1743.02
Show example Mitsubishi Eclipse Cross Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mitsubishi mechanics

Real customer reviews from Mitsubishi owners like you.

Excellent Rating

(11)

Rating Summary
10
1
0
0
0
10
1
0
0
0

Carlos

29 years of experience
601 reviews
Carlos
29 years of experience
Mitsubishi Raider V6-3.7L - Water Pump Replacement - Moreno Valley, California
Outstanding service

Scott

29 years of experience
7 reviews
Scott
29 years of experience
Mitsubishi Eclipse L4-2.4L - Water Pump - Oklahoma City, Oklahoma
Scott was polite, quick and thorough. Very nice, knowledgeable and kept a clean work area, top notch mechanic! six out of five stars!

Dan

40 years of experience
1080 reviews
Dan
40 years of experience
Mitsubishi Galant L4-2.4L - Water Pump - Winder, Georgia
Dan is always courteous, gets the job done on a timely manner. Will always use him. Thank you!

Cary

28 years of experience
92 reviews
Cary
28 years of experience
Mitsubishi Eclipse L4-2.4L - Water Pump - Raleigh, North Carolina

Excellent Rating

(11)

Rating Summary
10
1
0
0
0
10
1
0
0
0
Number of Mitsubishi Water Pump Replacement services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mitsubishi MECHANICS
800+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Crankshaft Harmonic Balancer
Common signs include engine vibration, misaligned timing marks, and a separated harmonic balancer.
How Can I Tell If My Car Battery Needs Replacing?
There There are few things more frightening than hearing buzzing or clicking from your car when you’re trying to start it. It could mean any number of things, but chances are that it means you have a faulty car battery....
Coolant Temperature Sensor Replacement Tips
Learn everything you need to know about how to replace a coolant temperature sensor with this guide from YourMechanic.

My Lexus RX300 cannot start. i Noticed the fuel pump is not working. However it works when i connect a different power cable. is i

If the fuel pump powers on with a separate power source, you issue lies in signaling the fuel pump. The fuel pump relay can be at fault. Also other sensors like the crankshaft position sensor. On most vehicles, the engine...

My transmission is slipping. If I replaced it while that solve my problem?

If the transmission is actually slipping, a replacement with a good unit should do the trick. But transmission problems can be complicated, especially with the current electronically controlled units, and diagnosis should be done by someone with experience in that...

My cx5 won't start

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com