Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.
Included for free with this service
Online Booking
Mechanic comes to you
12-month / 12k-mile warranty
Free 50 point safety inspection
Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.
On average, the cost for a Mercury Villager Coolant Temperature Switch (Sensor) Replacement is $103 with $8 for parts and $95 for labor. Prices may vary depending on your location.
| Car | Service | Estimate | Shop/Dealer Price |
|---|---|---|---|
| 1996 Mercury VillagerV6-3.0L | Service typeCoolant Temperature Switch (Sensor) Replacement | Estimate$130.81 | Shop/Dealer Price$144.77 - $164.13 |
| 1997 Mercury VillagerV6-3.0L | Service typeCoolant Temperature Switch (Sensor) Replacement | Estimate$110.81 | Shop/Dealer Price$124.78 - $144.16 |
| 1998 Mercury VillagerV6-3.0L | Service typeCoolant Temperature Switch (Sensor) Replacement | Estimate$110.81 | Shop/Dealer Price$124.78 - $144.16 |
| 2001 Mercury VillagerV6-3.3L | Service typeCoolant Temperature Switch (Sensor) Replacement | Estimate$110.81 | Shop/Dealer Price$124.76 - $144.12 |
| 1994 Mercury VillagerV6-3.0L | Service typeCoolant Temperature Switch (Sensor) Replacement | Estimate$110.81 | Shop/Dealer Price$124.80 - $144.19 |
| 2002 Mercury VillagerV6-3.3L | Service typeCoolant Temperature Switch (Sensor) Replacement | Estimate$110.81 | Shop/Dealer Price$124.78 - $144.16 |
| 2000 Mercury VillagerV6-3.3L | Service typeCoolant Temperature Switch (Sensor) Replacement | Estimate$115.81 | Shop/Dealer Price$129.65 - $148.92 |
| 1995 Mercury VillagerV6-3.0L | Service typeCoolant Temperature Switch (Sensor) Replacement | Estimate$115.81 | Shop/Dealer Price$130.02 - $149.58 |
The coolant temperature switch, also called the coolant temperature sensor, is a switch that reads the engine coolant temperature and sends a signal to the engine control module, or ECM, to control other functions of engine operation such as the air-fuel ratio.
It is also called a switch because on some cars, it is used to turn on the engine cooling fan at a specific temperature. This aids in the engine warm-up process as well as keeping the engine at a safe operating temperature.
The Coolant Temperature Switch is verified that it needs to be replaced. The coolant is drained until the switch is exposed.
The defective Coolant Temperature Switch is removed by disconnecting the connector and removing it from the manifold.
The new Coolant Temperature Switch is installed into the mounting hole in the manifold and the electrical connector is reconnected. The coolant is then refilled.
The Coolant Temperature Switch is tested for operation, codes cleared, and retested to ensure all codes have been resolved.
The vehicle is road tested to ensure proper operation of the Cooling System.
If you suspect that your coolant temperature switch has failed, have one of our licensed mechanics come out immediately to diagnose the problem.
This part, when faulty, could cause the fan to run intermittently or not at all, which in turns causes overheating or overuse of the cooling fan motor. Whenever overheating occurs, severe engine damage is a possibility.
The engine air-fuel ratio is what keeps it running smoothly. If the ratio gets skewed, the engine will have poor fuel economy and run poorly or not at all. The coolant temperature switch is important because it gives the ECM the information it needs to make this calculation and run the engine optimally. YourMechanic will be able to tell you if this part is performing correctly.
Fast and easy service at your home or office
Backed by 12-month, 12.000-mile guarantee
Real customer reviews from Mercury owners like you.
Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.
