Mercury Marauder Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(21)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(21)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Mercury Marauder Car Battery Replacement is $255 with $160 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1967 Mercury MarauderV8-6.4LService typeCar Battery ReplacementEstimate$434.99Shop/Dealer Price$524.99 - $772.49
1966 Mercury MarauderV8-6.4LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1967 Mercury MarauderV8-6.7LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1965 Mercury MarauderV8-6.4LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$504.99 - $752.48
1970 Mercury MarauderV8-7.0LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.02 - $752.55
1969 Mercury MarauderV8-6.4LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1968 Mercury MarauderV8-7.0LService typeCar Battery ReplacementEstimate$419.99Shop/Dealer Price$509.87 - $757.28
1967 Mercury MarauderV8-7.0LService typeCar Battery ReplacementEstimate$419.99Shop/Dealer Price$510.24 - $757.94
Show example Mercury Marauder Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(21)

Rating Summary
21
0
0
0
0
21
0
0
0
0

Sergio

10 years of experience
204 reviews
Sergio
10 years of experience
Mercury Marauder V8-4.6L - Air Suspension Air Compressor - San Antonio, Texas
Great job

Leslie

14 years of experience
81 reviews
Leslie
14 years of experience
Mercury Marauder V8-4.6L - Thermostat - Philadelphia, Pennsylvania
He always does a good job

Rodric

14 years of experience
414 reviews
Rodric
14 years of experience
Mercury Marauder V8-4.6L - Fuel Pump - Atlanta, Georgia
Rodric is an EXCELLENT mechanic! He is EXTREMELY competent, Knowledgeable, professional, and cares about the customer and the job he does on the vehicle. He is an ASSET to Your Mechanic! Thank You!

Kiri

20 years of experience
372 reviews
Kiri
20 years of experience
Mercury Marauder V8-4.6L - Ball Joint Front Replacement (Upper Left, Upper Right) - Philadelphia, Pennsylvania
Very good & knowledgeable mechanic

Excellent Rating

(21)

Rating Summary
21
0
0
0
0
21
0
0
0
0
Number of Mercury Marauder services completed
231+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

P0302 OBD-II Trouble Code: Cylinder 2 Misfire Detected
P0302 code definition Cylinder 2 misfire detected What the P0302 code means Most vehicles have either 4 or 6 cylinders. Each cylinder...
P0140 OBD-II Trouble Code: O2 Sensor Circuit No Activity Detected (Bank 1, Sensor 2)
P0140 code definition O2 Sensor Circuit No Activity Detected (Bank 1, Sensor 2) What the P0140 code means P0140 is the OBD-II...
P0826 OBD-II Trouble Code: Up and Down Switch Input Circuit
P0826 means there is an issue with a circuit for the up and down switch, usually due to a disabled manual shifter or TCM placed in Limo-in mode.

Car's interior-rear view mirror broke off from the windshield. How do I reattach it or is it even possible?

Hi there. It seems that the base may be cracked and not fitting on the support base that is attached to the windshield. You can try putting Gorilla Glue on the mirror bracket to make it fix the crack and...

how do you know if you need to replace rotors

When brake pads are replaced, the brake rotors MUST either be re-surfaced on a brake lathe OR the brake rotors must be discarded and new rotors installed. If the old rotors are NOT worn below the legal minimum thickness, and...

It's a 2003 ford explorer I was wanting to buy it for the low I drove it maybe 1 mile and it will shift into a gear but will not move in d or rev how can I detect the problem before I buy it

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com