Mercury Grand Marquis Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(3)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Mercury Grand Marquis Control Arm Assembly Replacement is $150 with $10 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Mercury Grand MarquisV8-4.6LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$754.90Shop/Dealer Price$908.48 - $1361.10
1991 Mercury Grand MarquisV8-5.0LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$238.95Shop/Dealer Price$260.56 - $320.84
1998 Mercury Grand MarquisV8-4.6LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$591.39Shop/Dealer Price$690.74 - $982.94
2006 Mercury Grand MarquisV8-4.6LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$405.15Shop/Dealer Price$471.80 - $667.56
2003 Mercury Grand MarquisV8-4.6LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$357.95Shop/Dealer Price$404.32 - $533.69
1994 Mercury Grand MarquisV8-4.6LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$328.99Shop/Dealer Price$376.74 - $515.49
2008 Mercury Grand MarquisV8-4.6LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$357.95Shop/Dealer Price$402.42 - $530.37
2001 Mercury Grand MarquisV8-4.6LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$532.99Shop/Dealer Price$631.60 - $923.24
Show example Mercury Grand Marquis Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0

Bryant

8 years of experience
568 reviews
Bryant
8 years of experience
Grand Marquis 2003 - Control Arm Assembly - Carmel, IN
Very friendly and honest

Chris

10 years of experience
31 reviews
Chris
10 years of experience
Grand Marquis 2002 - Tie Rod End - Salt Lake City, UT
Doesn't leave work unfinished, in my case he had to go get a part and a specific tool to finish thhe job.

Chris

10 years of experience
31 reviews
Chris
10 years of experience
Grand Marquis 2002 - Brake Pads - Salt Lake City, UT
Very thorough. Nice guy, does good work.

Jason

0 years of experience
417 reviews
Jason
0 years of experience
Grand Marquis 2001 - Air Spring Bag - Phoenix, AZ
came and took care of problem great guy

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of Mercury Grand Marquis Control Arm Assembly Replacement services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

How to Get Pre-Approved for a Car Loan
Pre-approved car loans make buying a new car easier. Apply for a car loan before you begin car shopping so you can get the best rate and deal.
A Buyer’s Guide to the 2012 Audi A7
In In true Audi fashion, the 2012 A7 delivers the exceptional performance, enjoyable handling and luxurious interior you’ve come to expect. However, they also combined those things with an innovative four-door coupe hatchback design that is anything but ordinary. Key...
How Long Does a Timing Belt Last?
The The timing belt on your vehicle is responsible for coordinating the rotation of the crankshaft and the camshaft so the valves in your engine open and close at the right times, and the vehicle runs smoothly. The timing belt...

Odometer not working

The speedometer is calibrated to read the correct miles per hour and distance driven at the speedometer factory. Are you sure you misread the odometer to be 1.2 miles and not 12 miles? If the far right number is a...

Truck making a knocking noise .

Hello. You should contact a certified mechanic before running the engine anymore, to avoid any further damage or causing an unsafe driving condition. They should have the specialty tools and techniques to properly diagnose the problem. Without some further information,...

Check engine light came on in my 2001 Toyota Avalon after getting gas. Have heard this can be a gas cap problem

You're right, this could be a gas cap problem. But it could also be any number of other problems. The check engine light comes on (https://www.yourmechanic.com/article/the-check-engine-light-demystified) whenever the computer detects a fault in the car's emissions systems and the computer...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com