Mercury Capri Wheel Stud Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(15)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(15)

Wheel Stud Replacement Service

How much does a Wheel Stud Replacement cost?

On average, the cost for a Mercury Capri Wheel Stud Replacement is $120 with $25 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Mercury CapriL4-1.6L TurboService typeWheel Stud - Passenger Side Front ReplacementEstimate$165.59Shop/Dealer Price$188.24 - $233.69
1991 Mercury CapriL4-1.6L TurboService typeWheel Stud - Driver Side Rear ReplacementEstimate$212.08Shop/Dealer Price$241.77 - $292.49
1993 Mercury CapriL4-1.6LService typeWheel Stud - Driver Side Rear ReplacementEstimate$212.08Shop/Dealer Price$241.76 - $292.49
1993 Mercury CapriL4-1.6LService typeWheel Stud - Passenger Side Front ReplacementEstimate$145.59Shop/Dealer Price$168.24 - $213.68
1991 Mercury CapriL4-1.6L TurboService typeWheel Stud - Driver Side Front ReplacementEstimate$145.59Shop/Dealer Price$168.27 - $213.75
1994 Mercury CapriL4-1.6LService typeWheel Stud - Passenger Side Front ReplacementEstimate$145.59Shop/Dealer Price$168.26 - $213.72
1991 Mercury CapriL4-1.6LService typeWheel Stud - Driver Side Front ReplacementEstimate$150.59Shop/Dealer Price$173.12 - $218.48
1992 Mercury CapriL4-1.6L TurboService typeWheel Stud - Passenger Side Front ReplacementEstimate$150.59Shop/Dealer Price$173.49 - $219.14
Show example Mercury Capri Wheel Stud Replacement prices

What are wheel studs and how do they work?

Wheel studs are high-strength, threaded steel fasteners that securely hold the wheel and tire assembly to the axle hub. Typically, there are 4 to 6 studs per wheel pressed or threaded into the wheel hub. The wheel and tire assembly is mounted on the hub centering ring and the studs protrude from the hub through the wheel mounting holes. Lug nuts are threaded onto the studs to securely hold the wheel to the hub.

When to consider replacing wheel studs:

  • Wheel is loose or wobbling. The wheel and tire assembly must be held evenly and securely to the wheel hub by the lug nuts attached to the studs. If the lug nuts are not tightened securely, it can cause the wheel to vibrate, loosen and wobble, which can damage or even break the wheel studs and lug nuts, potentially causing the wheel to separate from the vehicle.
  • Missing or broken studs, or damaged threads. If the stud is missing or broken, the lug nut attached to the stud will be missing and the wheel will hold securely. When the threads on the stud are worn, rusted away, or otherwise damaged, the lug nut may not achieve the required torque and could come loose while driving.
  • Stud turns in place when fastening lug nut. When the stud spins in the wheel hub while tightening, it should be replaced. During replacement, the mounting hole in the wheel hub should be inspected for damage.

How do mechanics replace wheel studs?

  • The car is raised and supported on steel jack stands.
  • The wheel and tire assembly, brake rotor, and caliper are removed.
  • On vehicles where there is sufficient access at the back of the wheel hub, a compact tool is used to press the defective stud out of the hub.
  • On vehicles where there is no access to use a compact stud remover, the wheel hub must be removed. When the hub must be pressed out of the steering knuckle, the wheel bearing is typically replaced in the process of removing the hub. Sometimes, the entire hub and bearing assembly with the studs included can be replaced.
  • The new stud or studs are pressed into position from the back of the hub, the brake caliper and rotor are reinstalled, and the wheel is placed onto the studs.
  • The wheel lug nuts are tightened to the factory specifications.

Is it safe to drive with wheel stud problems?

No, but you can temporarily drive a vehicle at low speeds and for short trips with one missing wheel stud. However, if more than two studs are broken, it is recommended to repair the car prior to further use. Having all wheel studs in place with evenly tightened lug nuts prevents distortion of the brake rotor. Over longer periods, missing studs can damage the brake rotor, the wheel, and the remaining studs. A car may vibrate when driving with missing wheel studs and can cause the other studs or lug nuts to loosen. This can lead to the wheel separating from your tire while driving.

When replacing wheel studs keep in mind:

  • Wheel studs are made of high-strength steel. If a stud has broken, it is typically due to previous overtightening. Lug nuts should be tightened using a calibrated torque wrench or a torque limiting device.
  • Published torque values assume that studs are dry, clean, and free of all lubricants. Oil, grease, anti-seize or any similar compound should not be applied to the threads of a wheel stud or lug nut.
  • Should a vehicle require removal of the wheel hub to add a new wheel stud, studs on the hub should be replaced. However, only defective studs need to be replaced if there is access from the back of the hub.
  • Lug nuts should be tightened in a star or crisscross pattern specified by the original equipment manufacturer in order to avoid warping of the brake rotor or drum as well as damaging the wheel.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(15)

Rating Summary
15
0
0
0
0
15
0
0
0
0

Raul

34 years of experience
285 reviews
Raul
34 years of experience
Mercury Capri L4-1.6L Turbo - Alternator - Oakland, California

Kenneth

16 years of experience
113 reviews
Kenneth
16 years of experience
Mercury Capri L4-1.6L Turbo - Air Filter - Oakland, California
Kenneth is great - he's passionate about cars, he knows what he's doing, he communicates clearly and he obviously enjoys his work.

Omar

12 years of experience
287 reviews
Omar
12 years of experience
Mercury Capri L4-1.6L - Clutch Master Cylinder - Fort Lauderdale, Florida
Friendly service.

Robert

20 years of experience
1126 reviews
Robert
20 years of experience
Mercury Capri L4-1.6L - Ignition Coil Replacement - Denver, Colorado
Excellent service. The speed, quality, convenience, and price has prompted me to user YourMechanic more often than a traditional shop.

Excellent Rating

(15)

Rating Summary
15
0
0
0
0
15
0
0
0
0
Number of Mercury Capri services completed
165+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

The Best Used Cars to Buy If You're an Uber or Lyft Driver
Are Are you thinking of becoming a driver for Uber or Lyft? That could be an exciting career change – you’ll get to meet a lot of interesting people, and if you love to drive, what better way to spend...
P3408 OBD-II Trouble Code: Cylinder 1 Deactivation/Exhaust Valve Malfunction
P3408 P3408 code definition P3408 is the fault code for Cyl1 Exhaust Valve Ctrl Circ High. Cyl1 specifies that the issue is likely taking place in engine cylinder number 1. What the P3408 code means Late model vehicles with eight...
B1392 OBD-II Trouble Code: Power Door Memory Lock Relay Circuit Failure
B1392 means there is a malfunction with the power door memory lock relay circuit. This is likely due to damaged wiring or circuit failure.

My car won't start - 2011 Hyundai Accent

There are many factors that may cause a vehicle not to start, especially after sitting for a long period of time. First, you will need to determine if there is any power to the car at all (i.e. do the...

P1127 ETCS Actuator Power Source Circuit Malfunction

Hi there. There are probably more blown fuses than just the two you mentioned. That particular code generally means that the throttle motor circuit has no power available. I suggest checking all the fuses and replacing as necessary; this includes...

I talked to one a few days ago, I have a 2009 mercury mariner 6 cylinder

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com