Mercedes-Benz SLK350 Valve Cover Gasket Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Mercedes-Benz SLK350 Valve Cover Gasket Replacement is $488 with $110 for parts and $378 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2006 Mercedes-Benz SLK350V6-3.5L	Service typeValve Cover Gasket Replacement	Estimate$685.74	Shop/Dealer Price$759.83 - $939.56
2007 Mercedes-Benz SLK350V6-3.5L	Service typeValve Cover Gasket Replacement	Estimate$1549.25	Shop/Dealer Price$1633.63 - $1821.09
2014 Mercedes-Benz SLK350V6-3.5L	Service typeValve Cover Gasket Replacement	Estimate$2115.85	Shop/Dealer Price$2342.29 - $2955.00
2015 Mercedes-Benz SLK350V6-3.5L	Service typeValve Cover Gasket Replacement	Estimate$2115.73	Shop/Dealer Price$2342.12 - $2954.72
2013 Mercedes-Benz SLK350V6-3.5L	Service typeValve Cover Gasket Replacement	Estimate$2115.85	Shop/Dealer Price$2365.73 - $2996.03
2008 Mercedes-Benz SLK350V6-3.5L	Service typeValve Cover Gasket Replacement	Estimate$1549.25	Shop/Dealer Price$1636.26 - $1825.68
2011 Mercedes-Benz SLK350V6-3.5L	Service typeValve Cover Gasket Replacement	Estimate$1549.25	Shop/Dealer Price$1634.27 - $1822.20
2016 Mercedes-Benz SLK350V6-3.5L	Service typeValve Cover Gasket Replacement	Estimate$1838.35	Shop/Dealer Price$2058.56 - $2666.53

Show example Mercedes-Benz SLK350 Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(52)

Rating Summary

50

1

0

0

1

50

1

0

0

1

SEE REVIEWS NEAR ME

Robert

38 years of experience

237 reviews

Robert

38 years of experience

by Thomas

Mercedes-Benz SLK350 V6-3.5L - Check Engine Light is on - Atlanta, Georgia

Terry

27 years of experience

326 reviews

Terry

27 years of experience

by Gordon

Mercedes-Benz SLK350 V6-3.5L - Windshield Washer Pump Replacement (Front) - Paradise Valley, Arizona

Terry was excellent. He arrived early and was efficient, clean and safe. He also helped me with some out of scope diagnostics that help me understand the workings of this recently acquired vehicle. Thank you Terry.

Charles

26 years of experience

10 reviews

Request Charles

Charles

26 years of experience

Request Charles

by Lyndon

Mercedes-Benz SLK350 V6-3.5L - Other Inspections - Los Gatos, California

Came for an inspection regarding cupping on my SLK - Charles was on time and was very professional in his diagnosis (worn struts). Good service!

Jeremy

21 years of experience

802 reviews

Jeremy

21 years of experience

by Benjamin

Mercedes-Benz SLK350 V6-3.5L - Pre-purchase Car Inspection - West Palm Beach, Florida

Honest, very thorough and polite. Highly recommend.

Excellent Rating

(52)

Rating Summary

50

1

0

0

1

50

1

0

0

1

SEE REVIEWS NEAR ME

Recent articles & questions

Symptoms of a Bad or Failing Fan Clutch

If your car has a fan clutch, common signs include the vehicle overheating, the cooling fans working very loudly, or engine performance decreasing.

A Buyer's Guide to the 2012 Mazda CX-7

If If you want an SUV, but don’t care as much about the “utility” part as you do the “sport” features, you should take a look at what the 2012 Mazda CX-7 has to offer. Key Features With a turbo...

How to Drive Through a Roundabout

While While roundabouts used to be relatively rare in the United States, they’re now pretty commonly found on roads all over the country. Roundabouts allow drivers to turn in either direction, make a U-turn, or continue straight - without having...

Car won't accelerate after stop

If the vehicle is not moving when you press on the gas pedal, it is possible that the transmission may be slipping. I would recommend having professional technician, such as one from YourMechanic, test your vehicle's acceleration (https://www.yourmechanic.com/services/car-does-not-move-when-i-step-on-the-gas-pedal-inspection) so that...

How to safely lift my vehicle

Hello. The jacking points on your vehicle should be marked by a triangle on the side of the pinch weld pointing down. You place the jack right underneath the pinch weld to lift up the vehicle. The lifting points should...

Had oil changed, filter was not put in correctly and now have a p0014 code.

Hi there. This article on what the P-0014 OBD-II trouble code (https://www.yourmechanic.com/article/p0014-obd-ii-trouble-code-camshaft-position-b-timing-over-advanced-or-system-performance-bank-1-by-jay-safford) is, what causes it and how it is resolved might shed some light on this issue. The only item that may have caused damage to this sensor would...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com