logo

Mercedes-Benz SLK300 Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(14)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(14)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Mercedes-Benz SLK300 Brake Master Cylinder Replacement is $524 with $328 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Mercedes-Benz SLK300V6-3.0LService typeBrake Master Cylinder ReplacementEstimate$873.00Shop/Dealer Price$1045.82 - $1544.44
2009 Mercedes-Benz SLK300V6-3.0LService typeBrake Master Cylinder ReplacementEstimate$860.39Shop/Dealer Price$1028.88 - $1524.25
2010 Mercedes-Benz SLK300V6-3.0LService typeBrake Master Cylinder ReplacementEstimate$860.39Shop/Dealer Price$1028.94 - $1524.36
2016 Mercedes-Benz SLK300L4-2.0L TurboService typeBrake Master Cylinder ReplacementEstimate$1044.69Shop/Dealer Price$1259.31 - $1892.95
Show example Mercedes-Benz SLK300 Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Mercedes-Benz SLK300 services completed
154+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(14)
Rating Summary
13
1
0
0
0
13
1
0
0
0

Luis

16 years of experience
244 reviews
Request Luis
Luis
16 years of experience
Request Luis
by PATRICK
Mercedes-Benz SLK300 V6-3.0L - Valve Cover Gasket - Las Vegas, Nevada
Luis showed up on time ready to work on a Sunday he finished the job 2 hours ahead of schedule and it was under the price he quoted me which was a plus.

Luis

16 years of experience
244 reviews
Request Luis
Luis
16 years of experience
Request Luis
by PATRICK
Mercedes-Benz SLK300 V6-3.0L - Brake Pads Replacement (Front) - Las Vegas, Nevada
Arrived on time explained to me at the end how much I needed my brake job was able to watch the game while he worked will definitely use him again.

Jose

16 years of experience
249 reviews
Request Jose
Jose
16 years of experience
Request Jose
by Patrick
Mercedes-Benz SLK300 L4-2.0L Turbo - Pre-purchase Car Inspection - Tampa, Florida
Excellent Job, did a pre inspection for a used car moving around the dealerships. He was very professional, worked with the dealerships, and inspected the vehicle when it became available. Very pleased with his work.

Bryan

9 years of experience
102 reviews
Request Bryan
Bryan
9 years of experience
Request Bryan
by Lisa
Mercedes-Benz SLK300 L4-2.0L Turbo - Brake Pads Replacement (Front) - Henderson, Nevada
Bryan was on time, friendly, knowledgeable, and honest.

Excellent Rating

(14)
Rating Summary
13
1
0
0
0
13
1
0
0
0
Number of Mercedes-Benz SLK300 services completed
154+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

P0499 OBD-II Trouble Code: Evaporative Emission System Vent Valve Control Circuit High
P0499 code means the ECM has detected abnormal amounts of pressure in the evaporative emissions system due to clogging or faulty/broken valves.
Read more
How to Fix Car Dents
Fixing car dents can be easier than you might think. You can use a plunger, dry ice, or a hairdryer to fix dents in your car body.
Read more
How to Buy Good Quality Transfer Case Fluid
Do Do you drive an all-wheel drive, or four-wheel drive vehicle? If so, you can bet it most likely has transfer case fluid. The transfer case fluid is found within the transfer fluid case. This case can sometimes be called...
Read more

Emergency flasher won't work in 2008 Nissan 350Z

It seems that your Nissan may have an issue with the emergency flasher switch or perhaps the flasher relay itself. This is definitely both an electrical issue and safety issue that needs to be resolved as soon as possible. As...
Read more

Vehicle will not start

Hello. It sounds like your vehicle's security system is activated. In order for your vehicle to start again the system needs to be reset or disabled. This particular model of vehicle may have a small black button underneath the dash,...
Read more

Blown head gasket for 8 months can I fix it or is it to late?

If the engine has a blown head gasket then you may have got coolant and water into the engine cylinders and inside the crankcase. Since it sat for a long period then you may have rust that built up inside...
Read more
  1. Home
  2. Estimates
  3. Mercedes-Benz
  4. SLK300
  5. Brake Master Cylinder Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com

Read FAQ
GET A QUOTE