Mercedes-Benz SLK280 Exhaust Gas Recirculation (EGR) Tube Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(32)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(32)

Exhaust Gas Recirculation (EGR) Tube Replacement Service

How much does a Exhaust Gas Recirculation (EGR) Tube Replacement cost?

On average, the cost for a Mercedes-Benz SLK280 Exhaust Gas Recirculation (EGR) Tube Replacement is $305 with $201 for parts and $104 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Mercedes-Benz SLK280V6-3.0LService typeExhaust Gas Recirculation (EGR) Tube ReplacementEstimate$528.37Shop/Dealer Price$648.09 - $963.94
2006 Mercedes-Benz SLK280V6-3.0LService typeExhaust Gas Recirculation (EGR) Tube ReplacementEstimate$506.37Shop/Dealer Price$626.13 - $942.00
2008 Mercedes-Benz SLK280V6-3.0LService typeExhaust Gas Recirculation (EGR) Tube ReplacementEstimate$506.37Shop/Dealer Price$626.12 - $942.00
Show example Mercedes-Benz SLK280 Exhaust Gas Recirculation (EGR) Tube Replacement prices

What is the Exhaust Gas Recirculation (EGR) Tube all about?

The EGR (Exhaust Gas Recirculation) valve helps lower the car’s exhaust emissions (gases from the tailpipe). It recirculates a portion of the gasses coming out of the engine by putting them back into the intake manifold, where the engine can burn them again, reducing emissions.

Most engines require exhaust gas recirculation to meet emissions standards. If the EGR valve has gone bad, the car will most likely not pass an emissions test.

Keep in mind:

During the EGR valve replacement, your mechanic should also inspect the vacuum hoses connected to the EGR valve. If the vacuum hoses are cracked (leaking), EGR valve will not function properly.

How it's done:

  • Scan the computer system in the car.
  • Check all vacuum related hoses to EGR valve.
  • Test EGR transducer.
  • Verify the EGR port is not clogged.
  • Remove and replace the EGR valve and gasket.
  • Clear the trouble codes and test for proper operation of EGR valve.

Our recommendation:

It is a good idea to get an air induction (carbon cleaning) service performed every 50,000 miles. This should clean out any sludge or carbon build-up in the air intake system. Always keep up with the regular oil changes; it will help prevent sludge build-up in the engine.

What common symptoms indicate you may need to replace the Exhaust Gas Recirculation (EGR) Tube?

  • Check Engine light is on.
  • Engine rattles during acceleration.
  • Engine has trouble idling.

How important is this service?

Your engine is not as efficient as it can be, which is why you have an EGR valve. The EGR valve takes a portion of the gas that your engine is excreting, and recirculates it through the intake manifold. The intake manifold then sends the gas back to the engine, where it is used again to power your vehicle. The tube is a key part of the EGR valve, and when the tube fails, the EGR valve will fail to do its job. As a result, your vehicle will not recirculate or recycle any of the excess gas from the engine, and you will get worse gas mileage and possibly fail emissions standards.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(32)

Rating Summary
31
0
0
0
1
31
0
0
0
1

Damian

11 years of experience
430 reviews
Damian
11 years of experience
Mercedes-Benz SLK280 V6-3.0L - Battery - Orlando, Florida
All went well. Thanks

Cognac

20 years of experience
73 reviews
Cognac
20 years of experience
Mercedes-Benz SLK280 V6-3.0L - Battery will not hold a charge - Memphis, Tennessee
Cognac was prompt, professional, honest, and helpful!

Doug

34 years of experience
139 reviews
Doug
34 years of experience
Mercedes-Benz SLK280 V6-3.0L - Brake Pads Replacement (Rear) - Sun City, California
None

Kevin

24 years of experience
536 reviews
Kevin
24 years of experience
Mercedes-Benz SLK280 V6-3.0L - Air Pump - Duluth, Georgia
Kevin is very courteous, knowledgeable and efficient! He even arrived early, and always finishes in a very timely manner!

Excellent Rating

(32)

Rating Summary
31
0
0
0
1
31
0
0
0
1
Number of Mercedes-Benz SLK280 services completed
352+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Can I Drive with Damaged or Missing Mirrors?
It’s critical that you’re able to see behind and beside you while driving. This is accomplished by using the rearview mirror, or one of...
How to Buy a Good Quality Oil Pan Gasket
When When your garage floor looks like an oil slick, there’s a good possibility that you will be shopping for a new oil pan gasket in the near future. While oil leaks can also be caused by a loose oil...
B1946 OBD-II Trouble Code: Climate Control A/C Post Evaporator Sensor Circuit Failure
B1946 means there is a defect in the evaporator temperature sensor for the climate control system, likely due to a faulty sensor or damaged wiring.

How do the front air bags work?

The front air bags in your car are designed to provide important protection in the event of certain types of collision. Here’s what you need to know about them: Multiple Thresholds: Once, air bags only inflated. However, yours have multiple...

Why is something in the hood of my car ticking?

You need to check the oil level to see how low you are on oil (https://www.yourmechanic.com/services/oil-level-is-low-inspection). You may not have added enough oil. If you are not sure then go to a full service station or have a technician, like...

Can i bolt a sheet of wood underneath my car to prevent rust?

Hello, and thank you for writing in. Wood absorbs water, and due to that physical trait, you should not use wood to help prevent rust damage. This will instead hold the moisture close to the metal components and influence them...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com