Mercedes-Benz SLC300 Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,558)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,558)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a Mercedes-Benz SLC300 Uneven tire wear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Mercedes-Benz SLC300L4-2.0L TurboService typeUneven tire wear InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2020 Mercedes-Benz SLC300L4-2.0L TurboService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2017 Mercedes-Benz SLC300L4-2.0L TurboService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2019 Mercedes-Benz SLC300L4-2.0L TurboService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
Show example Mercedes-Benz SLC300 Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,558)

Rating Summary
5,170
189
54
28
117
5,170
189
54
28
117

Mazyar

8 years of experience
468 reviews
Mazyar
8 years of experience
Mercedes-Benz SLC300 L4-2.0L Turbo - Brake Pads Replacement (Front) - Atlanta, Georgia
Could not have been more pleased with the great customer experience provided by Mayzar. He was early on a day that was very nasty due to weather. Kept me updated and made sure I understood everything he did. Looking forward to my next maintenance experience with Your Mechanic team.

Anthony

7 years of experience
130 reviews
Anthony
7 years of experience
Mercedes-Benz C230 L4-1.8L Turbo - Cabin Air Filter - Sacramento, California
Completely satisfied

Anderson

27 years of experience
91 reviews
Anderson
27 years of experience
Mercedes-Benz E350 V6-3.5L - Oxygen Sensor Replacement (Rear/Lower/Downstream) - Fresh Meadows, New York
Fantastic service. Extremely competent.

Dwaine

45 years of experience
39 reviews
Dwaine
45 years of experience
Mercedes-Benz 420SEL V8-4.2L - Oil Cooler Hose (Automatic Transmission) - Brandon, Florida
Great experience, very polite and knowledgeable mechanic.

Excellent Rating

(5,558)

Rating Summary
5,170
189
54
28
117
5,170
189
54
28
117
Number of Mercedes-Benz services completed
61138+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Refrigerant Pressure Switch (Sensor)
Common signs include the AC working intermittently or not at all, noise coming from the system, or warm air blowing from the vents.
P0003 OBD-II Trouble Code: Fuel Volume Regulator Control Circuit Low
P0003 P0003 trouble code definition The P0003 code is associated with the electrical circuit which connects to your fuel pressure regulator. It also may be related to other codes, such as: P0001, P0002, or P0004. What the P0003 code means...
The Best Tool For Mechanics to Diagnose Electrical Issues
Automotive technician jobs require tools to diagnose electrical problems. Mac Tools has a probe electrical tester that checks modern and older cars.

No power to the car after replacing the ignition switch.

Hi there. Check the electrical wiring in the steering column and make sure that the wires are not crossed. This will cause the system to bypass the switch and go back to the battery. Back track all of the wires...

Hello Tien, I'm leading an Audi A3 , 1.8 2016. Got it on July 28, did my first service in December. This month I've drove from Mia

Hi there. It is common for tire pressure to rise and fall with rise in altitude and with temperature. In fact, tire pressure can drop as much as 3 to 5 lbs when there is a temperature change of more...

Black smoke pouring from exhaust

Black smoke coming from the exhaust is usually an indication of a rich fuel condition. When this happens, this can be the result of many things such as faulty fuel injectors (https://www.yourmechanic.com/services/fuel-injector-replacement), a failing mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) or...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com