Mercedes-Benz SL400 Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,730)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,730)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a Mercedes-Benz SL400 Uneven tire wear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Mercedes-Benz SL400V6-3.0L TurboService typeUneven tire wear InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2016 Mercedes-Benz SL400V6-3.0L TurboService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
Show example Mercedes-Benz SL400 Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123

David

10 years of experience
172 reviews
David
10 years of experience
Mercedes-Benz SL400 V6-3.0L Turbo - Pre-purchase Car Inspection - Orlando, Florida
Pre-Purchase service - On time with appointment. Follow up call and report was generated immediately which is greatly appreciate. Many thanks!!

Sayeed

17 years of experience
82 reviews
Sayeed
17 years of experience
Mercedes-Benz C230 L4-1.8L Turbo - Control Arm Assembly Replacement (Front Lower Right) - Elmont, New York
Did a Great Job, im very satisfied.

Kenneth

20 years of experience
801 reviews
Kenneth
20 years of experience
Mercedes-Benz GLC300 L4-2.0L Turbo - Battery Voltage Converter - Carson, California
Absolutely one of if not, the best and most personable mechanics yet! Kenneth was tenacious about getting the needed part and his followup was supreme. Always on time and kept in contact on status of the part and his ETA. Meticulous when it came to putting enemy thing back as it should be as well. I will definitely call on him again! He is also a delight to chat with.

Christopher

20 years of experience
9 reviews
Christopher
20 years of experience
Mercedes-Benz C300 V6-3.5L - Fuel Filter Replacement - Stamford, Connecticut
Very professional and courteous

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123
Number of Mercedes-Benz services completed
63030+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Front Output Shaft Oil Seal
If your car has all- or four-wheel drive and there is noise or fluid leaking from the transfer case, consider replacing the front output shaft seal.
P2264 OBD-II Trouble Code: Water in Fuel Sensor Circuit
P2264 P2264 code definition Water in Fuel Sensor Circuit What the P2264 code means P2264 is an OBD-II generic code for the engine control module (ECM) detecting the water in fuel sensor circuit voltage falling below or exceeding the specified...
B1939 OBD-II Trouble Code: Air Bag Passenger Pressure Switch Circuit Short to Ground
B1939 means there is an issue with the air bag pressure switch on the passenger side, likely due to a malfunction in the switch or module.

I bought an ignition control module and no one seems to know where it goes. Is it in the distributor fuse box or computer or where

It is in the distributor (https://www.yourmechanic.com/article/how-does-a-distributor-work). Remove the distributor cap, remove the rotor. There are two connectors on the outside, and one on the inside. Be very careful with the one on the inside, it tends to be brittle. Two...

car lost power when driving and had to tow it home.

Hi there. Your vehicle may need a tune up. Check the air filter, spark plugs and wires. If they are the original parts, I recommend replacing them with OEM parts. Also check the idle air control valve (IAC (https://www.yourmechanic.com/services/idle-control-valve-replacement)) and...

torque hub assembly for 2011 buick lacrosse cxl

Hi there. The bolt torque to the backing plate on the front hubs are 45 foot pounds of torque. If you need further assistance with the backing plate (https://www.yourmechanic.com/services/brake-safety-inspection) installation, then seek out a professional, such as one from Your...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com