Mercedes-Benz S500 Car is hard to start Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(94)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(94)

Car is hard to start Inspection Service

How much does a Car is hard to start Inspection cost?

On average, the cost for a Mercedes-Benz S500 Car is hard to start Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Mercedes-Benz S500V8-5.0LService typeCar is hard to start InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
1996 Mercedes-Benz S500V8-5.0LService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1998 Mercedes-Benz S500V8-5.0LService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2001 Mercedes-Benz S500V8-5.0LService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
2000 Mercedes-Benz S500V8-5.0LService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2006 Mercedes-Benz S500V8-5.0LService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1995 Mercedes-Benz S500V8-5.0LService typeCar is hard to start InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
1999 Mercedes-Benz S500V8-5.0LService typeCar is hard to start InspectionEstimate$99.99Shop/Dealer Price$117.94 - $131.39
Show example Mercedes-Benz S500 Car is hard to start Inspection prices

A car that is hard to start can be a major inconvenience. While this is usually not a life threatening malfunction, it can make getting around much more difficult. There are a number of issues that will make a car hard to start. Everything from the electrical system to the fuel system to the actual starter itself can be the problem.

Finding the root cause of a hard starting engine can take some investigation. Ignoring a hard starting issue can further damage the vehicle, which will often result in a more expensive repair.

How this system works:

In order to get an engine running, it must be turned at speed so that it starts to suck fuel and air into the cylinders, and then compress and ignite this fuel/air mixture.

The starter motor is an electric motor that turns the engine to get it started. The starter motor has a small pinion gear wheel that engages with a larger gear ring at the rim of the engine flywheel.

The starter motor draws the electric current it needs to run from the battery. The starter needs a heavy current and to avoid sparking a solenoid is used. The ignition switch operates the starter motor. When the ignition is turned on, current is fed to the solenoid and into the starter motor. Once the car engine starts and the key is released, the starter motor turns off.

Common reasons for this to happen:

  • Bad Starter: Over time starter motors can wear out and start to malfunction. If this is the problem the starter will have to be replaced. If the car turns over, the problem is not the starter. If nothing happens when the key is turned the problem could be the starter, or if the car turns over very slowly and the dash lights dim while it is cranking, the starter could be the culprit.

  • Bad Relay Wiring: The wiring between the battery and starter can become loose or broken which will prevent the starter motor from functioning. The wiring will need to be replaced or repaired.

  • Low or Dead Battery: The starter motor needs voltage from the battery to operate. If the battery is low or failing it may not produce enough current for the starter motor to function. Charging or replacing the batter should resolve this problem.

It is also possible that the battery terminals have become corroded or loose. Cleaning and tightening the terminals and cables is recommended.

  • Failing Solenoid: A failing solenoid is a common issue with the starter system and if the solenoid is going bad, the car will be difficult to start. The starter will need to be inspected to determine if the problem is the starter motor itself or the solenoid. A failing solenoid will need to be replaced.

  • Failing Ignition Switch: Over time an ignition switch can start to fail and one of the most common symptoms is that the car is hard to start. If the ignition switch is hot to the touch this indicates an issue with the ignition switch wiring. A failing ignition switch will eventually stop working completely and will need to be replaced.

  • Defective Fuel Pump: If the engine is not getting enough fuel, it will be hard, if not impossible to start. The fuel pump is responsible for pulling gas from the tank to the injectors and if it is not delivering enough fuel the car will be difficult to start and eventually will not start at all.

  • Fouled Plugs: Spark plugs create the spark which allows the vehicle to burn fuel. Fouled plugs are one of the most common reasons for a hard starting engine. As electrodes wear down, the voltage required to jump the gap to ignite the fuel increases. This can lead to prolonged cranking before the engine will start.

  • Clogged Fuel Filter: A fuel filter that is clogged can make a vehicle very difficult to start. The fuel filter screens out contaminants and can become clogged over time. This will prevent the injectors from getting enough fuel, making the car hard to start.

  • Contaminated Fuel: Fuel that has too much alcohol or water in it will result in a car that is difficult and often impossible to start. Even if it does start, contaminated fuel can do serious damage to the engine. If contaminated fuel is suspected, have the vehicle inspected immediately.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the hard to start issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The starter, battery, connecting wiring and other important components will be inspected by the mechanic. This may include the vehicle's fuel pump, fuel filter, spark plugs, ignition and more. It may be necessary for the mechanic to crank up the car to verify the problem and issue an accurate diagnosis.

How important is this service?

If a car is hard to start, it's indicative of a major condition preventing normal operation and if left unattended it may lead to the car not starting at all. The vehicle should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(94)

Rating Summary
87
5
0
0
2
87
5
0
0
2

Stefan

17 years of experience
367 reviews
Stefan
17 years of experience
Mercedes-Benz S500 V8-5.0L - Install shifter repair kit in to removed shifter assembly - Danville, California
Again continued challenging communication with your mechanic but excellent responsiveness from Stefan.

Chuck

10 years of experience
371 reviews
Chuck
10 years of experience
Mercedes-Benz S500 V8-5.0L - Serpentine/Drive Belt Replacement - Mesquite, Texas
Wonderful and Very Prompt

Logan

49 years of experience
82 reviews
Logan
49 years of experience
Mercedes-Benz S500 V8-5.0L - Inspection / Diagnostics - Pleasanton, California
I had never used anything like this type of service. Logan was very respectful and I appreciate his help. He was so considerate and took time to explain what he felt was wrong with my vehicle.

Scott

29 years of experience
3 reviews
Scott
29 years of experience
Mercedes-Benz S500 V8-5.0L - Vacuum Pump - Littleton, Colorado
Scott was great have no problem with his mechanical knowledge. But I do have a problem with what you charged me . I have the correct part didn't know about soldering the part being it in a case hide behind padding. $95 dollars on ten minutes when you was charging me $143 dollars on the whole job???

Excellent Rating

(94)

Rating Summary
87
5
0
0
2
87
5
0
0
2
Number of Mercedes-Benz S500 services completed
1034+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P0166 OBD-II Trouble Code: O2 Sensor Circuit No Activity Detected (Bank 2, Sensor 3)
P0166 P0166 Code Definition O2 Sensor Circuit No Activity Detected (Bank 2, Sensor 3) What the P0166 code means The P0166 code means that the third oxygen sensor on the second bank of the exhaust has failed or is not...
P2198 OBD-II Trouble Code: O2 Sensor Signal Stuck Rich Bank 2 Sensor 1
P2198 P2198 code definition O2 Sensor Signal Stuck Rich Bank 2 Sensor 1 What the P2198 code means This trouble code indicates that the upstream oxygen sensor on the second bank of the exhaust is sending a reference voltage to...
P2603 OBD-II Trouble Code: Coolant Pump Control Circuit High
P2603 means a problem in the auxiliary coolant pump control circuit exists due to a faulty CAN harness or bus or, an overheating engine.

How do I play a USB device?

A USB device can be played through the sound system. To do so, locate the USB outlet connector, which is in the center console compartment, and plug the USB device directly into the outlet. Then, press the Auxiliary button.

Engine hesitates for 2-3 seconds before moving when accelerating from a stopped position.

The first thing that came to my mind was the Mass Airflow sensor, or MAF. This sensor is located in between the air filter box and the intake manifold. It is the primary sensor input for the amount of fuel...

2014 ford fusion service advancetrac message; ads, traction control, skid control and airbag lights lit up all at same time. Is th

ABS, traction and stability control systems rely on input from a number of sensors to function properly. Faults can be in any one of them from the brake light switch (https://www.yourmechanic.com/services/brake-light-switch-replacement), steering angle sensor (https://www.yourmechanic.com/services/steering-angle-sensor-replacement), wheel speed sensor (https://www.yourmechanic.com/services/abs-speed-sensor-replacement), or...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com