Mercedes-Benz S450 Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Mercedes-Benz S450 Brake Master Cylinder Replacement is $318 with $194 for parts and $123 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Mercedes-Benz S450V8-4.7LService typeBrake Master Cylinder ReplacementEstimate$549.77Shop/Dealer Price$660.96 - $963.05
2011 Mercedes-Benz S450V8-4.7LService typeBrake Master Cylinder ReplacementEstimate$521.77Shop/Dealer Price$632.99 - $935.09
2008 Mercedes-Benz S450V8-4.7LService typeBrake Master Cylinder ReplacementEstimate$521.77Shop/Dealer Price$632.99 - $935.09
2010 Mercedes-Benz S450V8-4.7LService typeBrake Master Cylinder ReplacementEstimate$521.77Shop/Dealer Price$632.95 - $935.03
2018 Mercedes-Benz S450V6-3.0L TurboService typeBrake Master Cylinder ReplacementEstimate$739.53Shop/Dealer Price$906.58 - $1378.39
Show example Mercedes-Benz S450 Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Ricardo

14 years of experience
339 reviews
Ricardo
14 years of experience
Mercedes-Benz S450 V6-3.0L Turbo - Pre-purchase Car Inspection - Culver City, California
Ricardo is very trustworthy, responsible, on time for the service , and fast reply.

Kenneth

20 years of experience
762 reviews
Kenneth
20 years of experience
Mercedes-Benz S450 V6-3.0L Turbo - Pre-purchase Car Inspection - Los Angeles, California
Kenneth is very friendly and easy to work with.

Arturo

27 years of experience
302 reviews
Arturo
27 years of experience
Mercedes-Benz 380SL V8-3.8L - Brake Master Cylinder - San Diego, California
Did a great Job.

Rocco

22 years of experience
302 reviews
Rocco
22 years of experience
Mercedes-Benz 300SD L5-3.0L Turbo Diesel - Brake Master Cylinder - Newport Beach, California
Rocco was fantastic!

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Mercedes-Benz Brake Master Cylinder Replacement services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1000+
experts on our platform

Recent articles & questions

How Much Power Does the AC Draw From the Engine?
Most cars these days come with air conditioning as a standard feature – gone are the days...
Is It Safe to Drive After Giving Plasma?
If If you are considering donating plasma, we salute you. Plasma is not produced artificially, and it is vital when it comes to various surgical procedures. Plasma is needed in the form of donations from healthy people, and often, the...
How to Get a Massachusetts Driver's Permit
The The Massachusetts graduated driver’s license program requires all new drivers to begin driving under supervision, in order to practice safe driving before getting their full driver’s license. In order to receive the initial learner’s permit, you must follow certain...

Intermittent failure to accellerate

This may be a result of a couple of different things, but is most commonly associated with a faulty throttle position sensor. The throttle position sensor (https://www.yourmechanic.com/services/throttle-position-sensor-replacement) monitors the throttle position of the throttle plate inside the throttle body in...

Vehicle wont start

The fuel system pressure should be checked to see if it is within specifications to start the vehicle and open the injectors. If the pressure is too low or no pressure then check the fuel pump connector and if it...

Fuel fill inlet

Hi...thank you for your question and I will try to help you with the issue. ALL faults that cause the check engine light to illuminate have to be resolved, with the light ultimately extinguished, because once the check engine light...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com