Mercedes-Benz S400 Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(9)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(9)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Mercedes-Benz S400 Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Mercedes-Benz S400V6-3.5L HybridService typeTransfer case fluid is dirty InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2011 Mercedes-Benz S400V6-3.5L HybridService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2012 Mercedes-Benz S400V6-3.5L HybridService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2013 Mercedes-Benz S400V6-3.5L HybridService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
Show example Mercedes-Benz S400 Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0

Attila

19 years of experience
963 reviews
Attila
19 years of experience
Mercedes-Benz S400 V6-3.5L Hybrid - Pre-purchase Car Inspection - Teterboro, New Jersey
Attila did a great job and called after it was completely inspected! Very professional and would here him again.

Jose

20 years of experience
12 reviews
Jose
20 years of experience
Mercedes-Benz S400 V6-3.5L Hybrid - Air Filter - Pompano Beach, Florida
Very precise and professional.

Joseph

27 years of experience
578 reviews
Joseph
27 years of experience
Mercedes-Benz S400 V6-3.5L Hybrid - Spark Plugs - Houston, Texas
joseph arrived on time . he was very courteous , knowledgeable , and knew exactly what to do to my Mercedes s400..I really liked his honesty . he changed the brake pads and rotors on my front end , did spark plugs ,cleaned throttle body and gasket , and changed airfilters. he indicated that my back brakes where fine and didnt need changing. I would definitely recommend him to anyone. thanks "your mechanic"

Joseph

27 years of experience
578 reviews
Joseph
27 years of experience
Mercedes-Benz S400 V6-3.5L Hybrid - Cabin Air Filter Replacement - Houston, Texas
Grt as usual!!!

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0
Number of Mercedes-Benz S400 services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Can I Prevent Door Seals From Leaking?
When When your car door seals leak, it’s more than just a passing nuisance. Water damage can occur to your interior, necessitating the replacement of upholstery or other components. In nearly every instance of leaking car door seals, which you...
How to Buy a Good Quality AC Condenser and Condenser Fan
A A car’s air conditioning system is an orchestra of different parts working together – the compressor, condenser, accumulator or receiver dryer, expansion valve or orifice tube, and the evaporator. Each component has a specific function and if one part...
How Long Does a Fuel Pressure Regulator Last?
In In order for the fuel system in a car to operate properly, it will need to have the right amount of pressure. The injectors that are mounted in each cylinder of the engine have to disperse the right level...

My transmission wont register any gears at all no reverse even. And it has at code p0785

Hi there. The transmission control module, or TCM, uses data from the shift/timing solenoids to manage hydraulic fluid transfers between circuits, and to perform changes in transmission gear ratios in order to accelerate, decelerate, optimize fuel efficiency, and maximize engine...

often to change transmission fluid

For this model, based on Toyota's normal versus severe conditions maintenance schedule, you should change the ATF fluid, and the ATF filter, every 60,000 miles. If you desire that a certified mechanic from YourMechanic perform that service for you, on...

I have a 2013 Nissan Altima with a 2.5l does it require synthetic or conventional oil??

According to the 2013 Altima Owner's Manual (https://www.nissanusa.com/content/dam/nissan/pdf/techpubs/altima/2013/2013-altima-sedan-owner-manual.pdf), you can use either conventional or synthetic oil in the Altima. Just be sure to use the correct viscosity and only oil that meets Nissan's quality (certification) requirements. See page 9-6 of...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com