Mercedes-Benz S320 Brake System Flush at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(25)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(25)

Brake System Flush Service

How much does a Brake System Flush cost?

On average, the cost for a Mercedes-Benz S320 Brake System Flush is $166 with $26 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Mercedes-Benz S320L6-3.2LService typeBrake System FlushEstimate$231.88Shop/Dealer Price$257.40 - $319.79
1997 Mercedes-Benz S320L6-3.2LService typeBrake System FlushEstimate$222.87Shop/Dealer Price$245.30 - $305.37
1998 Mercedes-Benz S320L6-3.2LService typeBrake System FlushEstimate$198.95Shop/Dealer Price$215.44 - $257.60
1996 Mercedes-Benz S320L6-3.2LService typeBrake System FlushEstimate$222.87Shop/Dealer Price$245.34 - $305.44
1995 Mercedes-Benz S320L6-3.2LService typeBrake System FlushEstimate$222.87Shop/Dealer Price$247.92 - $309.95
1999 Mercedes-Benz S320L6-3.2LService typeBrake System FlushEstimate$198.95Shop/Dealer Price$215.69 - $258.03
Show example Mercedes-Benz S320 Brake System Flush prices

What is a brake system flush all about?

Brake fluid is essential for the operation of a car’s brakes. When you push the brake pedal, the brake fluid causes the brake pads to press against the rotors, making the car slow down and stop. Over time, the brake fluid absorbs air, moisture, sludge and other contaminants and gets contaminated. Air in the brake fluid causes braking to feel spongy and significantly reduces braking efficiency. A brake system flush includes removing the existing fluid and moisture out of the system and replacing it with new, clean, fluid. A brake fluid flush ensures proper brake system performance and increases the lifespan of your brake system components.

Keep in mind:

A mobile mechanic will use a hand-held vacuum pump and/or atmospheric pressure to remove the fluid. While it is not as powerful as a pressure bleeder, this is an industry approved method of bleeding your brakes. It gets the job done and provides the convenience of a mechanic coming to you.

How it's done:

  • Remove contaminated brake fluid
  • Add new brake fluid
  • Bleed the brakes
  • Clean any surfaces where brake fluid has spilled during the bleeding process
  • Check for fluid leaks
  • Inspect brake pads, rotors and hoses
  • Test drive car

Our recommendation:

Please follow the manufacturer's maintenance schedule and guidelines regarding fluid maintenance. It is a good practice to change brake fluid every 24,000 miles or 36 months. Always use a fluid recommended by your vehicles manufacturer (do not use silicone based brake fluids if your car needs regular brake fluid).

What common symptoms indicate you may need a brake system flush?

  • Brake fluid appears black or brown indicating contamination
  • Brake pedal feels spongy
  • Diminished brake system performance

How important is this service?

If you do not regularly flush your brake system, it will end up costing you more money down the road. As the fluid becomes contaminated, it will eventually cause brake system components to fail and leak. This will also lead to diminished brake system performance, causing a safety concern.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(25)

Rating Summary
22
1
0
2
0
22
1
0
2
0

Khoa

21 years of experience
402 reviews
Khoa
21 years of experience
Mercedes-Benz S320 L6-3.2L - Check Engine Light is on - San Jose, California
Good service

Amor

44 years of experience
181 reviews
Amor
44 years of experience
Mercedes-Benz S320 L6-3.2L - Heater Blower Motor Resistor - Tracy, California

Noni

23 years of experience
19 reviews
Noni
23 years of experience
Mercedes-Benz S320 L6-3.2L - Car is overheating - Forest Hills, New York
From all my experiences with mechanics, Nonis transparency is unmatched. He patiently diagnosed the vehicle and found the direct issue. I would definitely use his services in the future.

Raul

35 years of experience
285 reviews
Raul
35 years of experience
Mercedes-Benz S320 L6-3.2L - Trunk Latch Adjustment - Berkeley, California
=

Excellent Rating

(25)

Rating Summary
22
1
0
2
0
22
1
0
2
0
Number of Mercedes-Benz S320 services completed
275+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Diagnose an Ignition Key That Won’t Turn
If your car key won't turn in the ignition and your steering wheel locks it's easy to fix. Try jiggling the steering wheel and checking the battery.
How to Get Smog Technician Certified in Rhode Island
Automotive technician jobs include smog certified emissions inspectors. In Rhode Island, you need to be approved by the Division of Motor Vehicles.
How to Adjust a Clutch
The clutch is a critical component in the operation of manual transmission vehicles. The clutch allows the transmission to disengage...

My rear brake sounds like it's creaking what should I do?

Hello. Creaking is usually due to the brake pad hardware kit being worn. The hardware kit keeps pressure on the brake pads during braking and dampens vibrations. I always recommend replacing the hardware kit when replacing the brake pads since...

If I take the catalytic converters off, what do I do with the sensors?

If you remove the oxygen sensors from your vehicle, you will ruin the efficiency of the engine, thus consuming around 10 to 20 percent more gas than otherwise required, and also cause early failure of many components such as the...

Car cranks up and stay cranked soon as I put it in drove it cuts off after a lil jurk an still will crank rite back up its a 2014

Hi there. It sounds like you may be having internal transmission concerns affecting the engine; possibly a torque converter lock up solenoid stuck on. This can be confirmed with a capable scan tool and a digital volt/ohm meter. Check for...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com