Mercedes-Benz Maybach S650 Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(554)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(554)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Mercedes-Benz Maybach S650 Brake Pad Replacement is $270 with $130 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2020 Mercedes-Benz Maybach S650V12-6.0L TurboService typeBrake Pads - Rear ReplacementEstimate$446.96Shop/Dealer Price$516.52 - $715.48
2020 Mercedes-Benz Maybach S650V12-6.0L TurboService typeBrake Pads - Front ReplacementEstimate$436.15Shop/Dealer Price$503.59 - $700.96
2019 Mercedes-Benz Maybach S650V12-6.0L TurboService typeBrake Pads - Rear ReplacementEstimate$436.15Shop/Dealer Price$503.62 - $701.01
2019 Mercedes-Benz Maybach S650V12-6.0L TurboService typeBrake Pads - Front ReplacementEstimate$605.59Shop/Dealer Price$715.42 - $1039.89
2018 Mercedes-Benz Maybach S650V12-6.0L TurboService typeBrake Pads - Front ReplacementEstimate$601.03Shop/Dealer Price$718.12 - $1061.90
2018 Mercedes-Benz Maybach S650V12-6.0L TurboService typeBrake Pads - Rear ReplacementEstimate$934.07Shop/Dealer Price$1126.19 - $1697.14
Show example Mercedes-Benz Maybach S650 Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(554)

Rating Summary
519
22
5
3
5
519
22
5
3
5

Chet

42 years of experience
509 reviews
Chet
42 years of experience
Mercedes-Benz C230 V6-2.5L - Brake Pads Replacement (Rear) - San Diego, California
Chet is always professional and courteous. He went out of his way to ensure I got the right parts for my car

Thomas

13 years of experience
227 reviews
Thomas
13 years of experience
Mercedes-Benz C300 L4-2.0L Turbo - Brake Pads Replacement (Rear) - Grand Prairie, Texas
Friendly mechanic. Will use again

AL

13 years of experience
245 reviews
AL
13 years of experience
Mercedes-Benz ML350 V6-3.5L - Brake Pads Replacement (Rear) - Denver, Colorado
On time and very professional. Thank you Mr. Al.

Colby

15 years of experience
66 reviews
Colby
15 years of experience
Mercedes-Benz GLK350 V6-3.5L - Brake Pads Replacement (Rear) - Broomfield, Colorado
I would highly recommend Colby as he's professional, honest, trustworthy and a true expert at his craft! 5+ Stars indeed! Thanks again Colby!

Excellent Rating

(554)

Rating Summary
519
22
5
3
5
519
22
5
3
5
Number of Mercedes-Benz Brake Pad Replacement services completed
6094+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Decide on the Right Compass for Your Car
Compasses Compasses are useful tools for navigating through new areas, traveling, or just making sure that you’re headed in the right direction. A directional compass in your car can be a really helpful tool for finding a destination, and it’s...
P0420 OBD-II Trouble Code: Catalyst System Efficiency Below Threshold (Bank 1)
P0420 code means that either the upstream or downstream oxygen sensor in the catalytic converter is not working. Replacing these parts can fix P0420.
How to Remove Wheel Locks
When When you have nice, new rims (https://www.yourmechanic.com/article/how-rims-work-and-why-they-matter) on your car, you won’t be the only one admiring them. Good-looking wheels draw the attention of car aficionados and thieves alike. Wheels are an easy mark for thieves. When you leave...

Leak in heater core

Hello! That is a common problem with your particular vehicle. The heater core is made of a brass and aluminum material which is known to crack under the "heat stress" it endures. Luckily heater cores are rather inexpensive to purchase...

Headlight issue

Hi there: Depending on what type of vehicle you have, the problem is either caused by a loose electrical connection, a bad headlight switch (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-headlight-switch) or a faulty electrical relay. You might want to contact a local mechanic to complete...

Second opinion] When I push on the gas of my car to speed up it does a minor jerk and takes kind of long to accelerate. There’s also a loud thump sound when I shift gears

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com