Mercedes-Benz GLK250 Brake Wheel Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5,670)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5,670)

Brake Wheel Cylinder Replacement Service

How much does a Brake Wheel Cylinder Replacement cost?

On average, the cost for a Mercedes-Benz GLK250 Brake Wheel Cylinder Replacement is $248 with $115 for parts and $133 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Mercedes-Benz GLK250L4-2.1L Turbo DieselService typeBrake Wheel Cylinder - Passenger Side ReplacementEstimate$390.43Shop/Dealer Price$472.29 - $662.75
2013 Mercedes-Benz GLK250L4-2.1L Turbo DieselService typeBrake Wheel Cylinder - Passenger Side ReplacementEstimate$362.43Shop/Dealer Price$444.33 - $634.82
2014 Mercedes-Benz GLK250L4-2.1L Turbo DieselService typeBrake Wheel Cylinder - Driver Side ReplacementEstimate$362.43Shop/Dealer Price$444.33 - $634.82
2013 Mercedes-Benz GLK250L4-2.1L Turbo DieselService typeBrake Wheel Cylinder - Driver Side ReplacementEstimate$362.43Shop/Dealer Price$444.27 - $634.72
2014 Mercedes-Benz GLK250L4-2.1L Turbo DieselService typeBrake Wheel Cylinder - Passenger Side ReplacementEstimate$362.43Shop/Dealer Price$444.37 - $634.89
2015 Mercedes-Benz GLK250L4-2.1L Turbo DieselService typeBrake Wheel Cylinder - Driver Side ReplacementEstimate$362.43Shop/Dealer Price$444.33 - $634.82
Show example Mercedes-Benz GLK250 Brake Wheel Cylinder Replacement prices

What is the Brake Wheel Cylinder all about?

Brake wheel cylinders push the brake shoes against the brake drum, causing friction that slows down the car. They are located in the rear brake system, inside the brake drums. Over time, wheel cylinder seals may wear out and start leaking brake fluid, reducing the effectiveness of the brakes.

Keep in mind:

Brake wheel cylinders are replaced in pairs. Both rear tires will get new cylinders.

How it's done:

  • Inspect rear wheel cylinders for leakage.
  • Inspect rear brake shoes and hardware.
  • Replace wheel cylinders if found faulty.
  • Adjust rear brakes.
  • Lube backing plate.
  • Make sure axle seals are not leaking into brake drums.
  • Bleed entire brake system.
  • Perform a brake inspection, including test drive.

Our recommendation:

It is a good idea to get the brake wheel cylinders inspected once every year. You should get your brake system inspected immediately if the brake warning light is on.

What common symptoms indicate you may need to replace the Brake Wheel Cylinder?

  • Brake pedal goes all the way to the floor.
  • Noise from rear brakes.
  • Fluid leaking underneath the car near rear tires.

How important is this service?

When you depress your brake pedal, the brake wheel cylinder applies pressure to the brake shoe. This pressure pushes the brake shoe into contact with the brake drum, which creates the friction that allows your vehicle to slow down and stop. When the brake wheel cylinder stops working, it is no longer able to exert enough force onto the brake shoe, and your vehicle will not be able to brake as effectively as it should.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,670)

Rating Summary
5,278
191
54
28
119
5,278
191
54
28
119

Armando

32 years of experience
33 reviews
Armando
32 years of experience
Mercedes-Benz GLK250 L4-2.1L Turbo Diesel - Oil Change - Del Mar, California
Armando was great

Richard

21 years of experience
237 reviews
Richard
21 years of experience
Mercedes-Benz GLK250 L4-2.1L Turbo Diesel - Oil Change - Fort Myers, Florida
Arrived early, fast and efficient. Thanks.

Andy

30 years of experience
27 reviews
Andy
30 years of experience
Mercedes-Benz Metris L4-2.0L Turbo - Oil Change - Braintree, Massachusetts
Professional and knowledgeable

Nazareth

27 years of experience
288 reviews
Nazareth
27 years of experience
Mercedes-Benz CLA250 L4-2.0L Turbo - Check Engine Light is on - Los Angeles, California
Polite and very professional! Nazareth quickly identified my car was suffering from low voltage issues and the battery was the problem. The reader was showing 8 volts hence why my car didn’t receive enough power to start, it needed 12v. My battery was 4 years old and never been changed. Thank you Nazareth!

Excellent Rating

(5,670)

Rating Summary
5,278
191
54
28
119
5,278
191
54
28
119
Number of Mercedes-Benz services completed
62370+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Hybrid Cars Work
What What is a hybrid car? A hybrid car is one that uses more than one type of drivetrain to make movement. Most of the time, this means that the car takes gasoline to power an internal combustion engine and...
How to Repair Chips and Cracks in Your Windshield
When When stones or other objects hit your windshield, they can leave damage in the form of either chips in the glass, or cracks (https://www.yourmechanic.com/article/does-a-cracked-window-need-to-be-replaced) due to impact. There are certain things that you can’t control when you drive, including,...
P0536 OBD-II Trouble Code: A/C Evaporator Temperature Sensor Circuit Range/Performance
P0536 means an issue with the A/C temperature sensor circuit, often caused by damaged electrical components, or low refrigerant levels.

Car surges forward when I go down a gear

Hello, from what you describe it sounds like the engine control unit (https://www.yourmechanic.com/book/?mktg_jid=580) has some form of faulty programming. Mazda has released Technical Service Bulletin (TSB) 01-020/13 for updated engine control unit software to resolve RPM flair on downshifts. If...

Sunroof won't close

Hi. The electronic portion of your sunroof includes the sunroof switch, sunroof motor and body control module (BCM). The BCM supplies power to the sunroof motor when the operator pushes the switch. In some cases, a simple reset is all...

When parked if I slightly turn the [steering](/topics-steering/) wheel back and forth like gyrating it, the car makes a slight clunk noise that you can’t feel in the steering wheel but can be felt in the wheel/tire as well as the left outer tie rod. I just had the outer tie rod replaced so that is not the problem. It also makes a clunk when driving slow over a bump

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com