Mercedes-Benz GLE350d Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(41)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(41)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a Mercedes-Benz GLE350d Water Pump Replacement is $592 with $354 for parts and $238 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Mercedes-Benz GLE350dV6-3.0L Turbo DieselService typeWater Pump ReplacementEstimate$972.06Shop/Dealer Price$1159.91 - $1699.36
Show example Mercedes-Benz GLE350d Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(41)

Rating Summary
35
3
2
0
1
35
3
2
0
1

Dameron

18 years of experience
273 reviews
Dameron
18 years of experience
Mercedes-Benz CLK320 V6-3.2L - Water Pump - Indianapolis, Indiana
Being that I have an older (1999 Mercedes CLK) with a bad water pump, I must say I am very happy with the services provided. Although on rainy day, Dameron completed the repairs as promised in a timely fashion. Very meticulous and tidy with his work.

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Mercedes-Benz E430 V8-4.3L - Water Pump - Costa Mesa, California
Very friendly and thorough, walked me through all I needed to know about the problems.

Ben

42 years of experience
1589 reviews
Ben
42 years of experience
Mercedes-Benz E420 V8-4.2L - Water Pump - Houston, Texas
Courteous, knowledgeable, and kept in touch each step of the way. The wrong part was ordered and Ben handled things like a champ. I would certainly have no problems recommending.

James

31 years of experience
1039 reviews
James
31 years of experience
Mercedes-Benz C240 V6-2.6L - Water Pump - Orlando, Florida
Excellent mechanic and very knowledgeable will u have again for all my mechanics needs!

Excellent Rating

(41)

Rating Summary
35
3
2
0
1
35
3
2
0
1
Number of Mercedes-Benz Water Pump Replacement services completed
451+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Use a Steam Cleaner to Detail a Car
Regardless Regardless of how you use your vehicle, the interior can get dirty and soiled over time. Your car can get dirty in any of the following ways: Dyes and dirt transferred to the seats from clothing Oil and dirt...
Top 10 Scenic Drives in Arizona
Taking the scenic route is the best way to really see what a region has to offer. All too often, travelers get caught up in things like making good time or adhering to a schedule when all that does is...
P0411 OBD-II Trouble Code: Secondary Air Injection System Incorrect Flow Detected
P0411 code definition The P0411 DTC is a generic OBD-II code that points to a malfunction within the secondary air injection system....

2.4 mitsubishi triton 2008 engine idle high at times and when brakes pumped or ac on engine races 3000 rpm could this be the icv

The idle air control valve does regulate engine rpm during closed throttle operation and is controlled by a computer. You mentioned having 3000 RPMs with the A/C on, this seems pretty high and could be pointing to another problem like...

about engine

Combustion temperatures can run close to 2000 degrees. It's not likely that any kind of rubber will survive. Also, the springs would need huge amounts of tension to keep up with the fast movement of the piston and that tension...

My SUV makes a groaning noise when shifting gears.

Hi C.F. Theoretically, it could be both a brake or transmission problem. It could also be due to a wheel bearing wearing out. Typically a brake grinding issue will occur when the vehicle is slowing (in forward or reverse). The...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com