Mercedes-Benz GLC63 AMG S Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,670)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,670)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Mercedes-Benz GLC63 AMG S Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2020 Mercedes-Benz GLC63 AMG SV8-4.0L TurboService typeTransfer case fluid is dirty InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2018 Mercedes-Benz GLC63 AMG SV8-4.0L TurboService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2019 Mercedes-Benz GLC63 AMG SV8-4.0L TurboService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2021 Mercedes-Benz GLC63 AMG SV8-4.0L TurboService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
Show example Mercedes-Benz GLC63 AMG S Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,670)

Rating Summary
5,278
191
54
28
119
5,278
191
54
28
119

Jose

16 years of experience
324 reviews
Jose
16 years of experience
Mercedes-Benz C300 V6-3.0L - Battery - Fort Lauderdale, Florida
Great mechanic. Quick and efficient.

Jamahl

20 years of experience
830 reviews
Jamahl
20 years of experience
Mercedes-Benz SLK230 L4-2.3L Turbo - Pre-purchase Car Inspection - Oviedo, Florida
Jamahl was very friendly and I felt I could trust him. He diagnose my car and gave me peace of mind. Thanks Jamahl.

Oreste

14 years of experience
149 reviews
Oreste
14 years of experience
Mercedes-Benz ML350 V6-3.5L - AC is not working Inspection - Miami, Florida
Great service

Ben

41 years of experience
1441 reviews
Ben
41 years of experience
Mercedes-Benz C240 V6-2.6L - Crankshaft Position Sensor - Houston, Texas
Best mechanic ever maybe. I worked on this problem 3 hrs no success. Ben had it done in 2 minutes. He was 30 minutes early. Strong integrity. I really want him as a friend. Military trained marines are good to know because of the values like punctuality, skill mastery, integrity, and friendly. I would not go on like this if he was not all I said. If Ben is assigned you’re car will be fixed.

Excellent Rating

(5,670)

Rating Summary
5,278
191
54
28
119
5,278
191
54
28
119
Number of Mercedes-Benz services completed
62370+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Buy a Personalized License Plate in Utah
When When you drive a car, you need to have license plates on it in order to operate it legally. You can get license plates that are generic, just the next license plate number in a sequence of manufactured plates....
Understanding the IIHS Ratings For Automatic Braking Technology
In In March 2016 the automotive industry received exciting news concerning vehicle safety. While this announcement has actually been a feature available in the United States since 2006, the National Highway Traffic Safety Administration, also known as the NHTSA, and...
P2199 OBD-II Trouble Code: Intake Air Temperature Sensor 1 / 2 Correlation
P2199 P2199 code definition P2199 is a general OBD-II diagnostic trouble code indicating a malfunction with the intake air temperature sensor 1 / 2 correlation. This code may be seen with other intake air sensor codes. What the P2199 code...

2004 Saturn Vue...Right Front brake hanging up, replaced caliper and master cylinder and still hanging up.

High brake effort can be caused by a restriction in the system. What can happen with the brake system is the brake hoses attached to caliper degrade internally causing a restriction. The hose will collapse under pressure.

Possible damage

Hello. If you recently had your vehicle serviced by a shop and this occurred right after then you really should take it back. It is possible that something went wrong and it may be as simple as a loose connection....

Hi my engine is running rich. I've just replaced the float needle valves and checked the level in the carburettors (3) and the fuel level seems correct at 12mm. My next move is checking the fuel pump pressure because I believe there is still evidence of flooding and I am advised that the fuel pump may be delivering fuel at too high a pressure and pushing fuel through the needle valves. According to the manual the fuel pressure should be 1.5 - 2.5 psi. If the pressure is too high how do I adjust.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com