Mercedes-Benz GLA250 Windshield Wiper/Washer System Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(48)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(48)

Windshield Wiper/Washer System Inspection Service

How much does a Windshield Wiper/Washer System Inspection cost?

On average, the cost for a Mercedes-Benz GLA250 Windshield Wiper/Washer System Inspection is $133 with $38 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Mercedes-Benz GLA250L4-2.0L TurboService typeWindshield Wiper/Washer System InspectionEstimate$190.75Shop/Dealer Price$227.19 - $297.14
2017 Mercedes-Benz GLA250L4-2.0L TurboService typeWindshield Wiper/Washer System InspectionEstimate$170.75Shop/Dealer Price$199.71 - $264.04
2019 Mercedes-Benz GLA250L4-2.0L TurboService typeWindshield Wiper/Washer System InspectionEstimate$170.75Shop/Dealer Price$199.71 - $264.04
2018 Mercedes-Benz GLA250L4-2.0L TurboService typeWindshield Wiper/Washer System InspectionEstimate$170.75Shop/Dealer Price$199.69 - $264.00
2016 Mercedes-Benz GLA250L4-2.0L TurboService typeWindshield Wiper/Washer System InspectionEstimate$170.75Shop/Dealer Price$207.25 - $277.24
Show example Mercedes-Benz GLA250 Windshield Wiper/Washer System Inspection prices

The windshield wiper and washer system help keep a windshield clean and free of rain, dirt, sleet or snow. This system is not only a convenience but a safety system as well. Limited visibility due to a dirty windshield can make safe driving difficult or impossible.

There are a number of components in the wiper/washer system that can malfunction and cause problems. Everything from a blown fuse to a bad pump can leave a windshield dirty.

How this system works:

Windshield wipers use two different technologies to keep the windshield clean. An electric motor using a worm gear provides the power to move the wipers while a linkage converts the rotational output of the electric motor into the familiar back and forth motion of the wiper blades.

The windshield washer system uses a washer pump that is installed at the base of the washer fluid reservoir. The pump is activated by a spring-loaded switch, this switch turns on the wipers as well. The fluid is pumped through a rubber or plastic hose that runs up to windshield and separates in two lines that feed the washer nozzles on the hood of the car.

Common reasons for this to happen:

Windshield Wiper Issues

  • Worn wiper blades: Wiper blades need to be replaced on a regular basis. Worn wiper blades will not clean the windshield. Smearing or streaking are common symptoms of worn blades. If the blades chatter this can also indicate dirty or worn blades. Torn or cracking blades need to be replaced.

  • Bent or loose wiper arms: Wiper arms can become bent, usually due to vandalism. If the wiper blades are not cleaning the windshield but still appear to be in good shape loose or bent wiper arms could be the problem.

  • Malfunctioning wiper arm linkage: The linkage between the wiper motor and the blades can become damaged. The most common symptom of a broken linkage is one wiper arm not working.

  • Blown fuse: A blown fuse will cut off the electric current to the wiper motor. If both blades fail to function when turned on, a blown fuse is usually the starting point for a diagnosis.

  • Bad wiper motor: If the blades fail to operate at all, are operating slowly, only operate on one speed or do not stop in the correct position a bad or malfunctioning wiper motor could be the culprit. The motor will need to be repaired or replaced.

  • Defective wiper switch: If the wipers do not turn on when the switch is flipped, keep running after being switched off or it is impossible to select the proper speed settings the switch may be defective and will have to be replaced.

Windshield Washer Issues

  • No washer fluid: One of the most common reasons windshield washers fail to work is because the fluid reservoir is empty.

  • Blown fuse: Fuses provide overcurrent protection to all of the vehicle’s electrical units and this includes the windshield washer system. If a fuse blows, the electrical current to the washer pump will be cut off and the washer system will not work.

  • Bad windshield washer switch: The switch that turns on the windshield washer can malfunction and fail to send a signal to the pump. If this happens the pump will not work.

  • Broken washer pump: The electric pump that sends the fluid from the reservoir to the nozzles can malfunction or break.

  • Leaky washer tubes or bottle: The washer reservoir or the tubing that moves the fluid to the nozzles can crack or leak. This can lead to lost fluid on route to the nozzles, which can result in a weak spray or no spray at all.

  • Clogged washer tubes or nozzles: The tubing or the nozzles themselves can become clogged with debris. The nozzles, which are quite small can easily get clogged by dirt, leaves or other debris.

  • Frozen washer fluid: In extremely cold weather it is possible for washer fluid to freeze. If the fluid is frozen it should thaw as the car warms up.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the windshield wiper or washer system issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning windshield wiper or washer system is usually not a life or death situation but it should be addressed as soon as it is convenient. This can become a very real problem if the weather suddenly turns bad as limited visibility can make driving extremely dangerous.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(48)

Rating Summary
46
2
0
0
0
46
2
0
0
0

Sebastian

5 years of experience
112 reviews
Sebastian
5 years of experience
Mercedes-Benz GLA250 L4-2.0L Turbo - ABS Speed Sensor Replacement (Passenger Side Rear) - Boca Raton, Florida
Sebastian is great! Definitely recommend him 

Attila

19 years of experience
910 reviews
Attila
19 years of experience
Mercedes-Benz GLA250 L4-2.0L Turbo - Oil Change - Teaneck, New Jersey
So inexpensive compared to my car’s service place. And crazy convenient. I’m so gonna use them only from now on until my car dies or I do!!! :-)

Daniel

12 years of experience
58 reviews
Daniel
12 years of experience
Mercedes-Benz GLA250 L4-2.0L Turbo - Oil Change - Chattanooga, Tennessee
Pro, timely, expert and goes above and beyond!

Gustavo

15 years of experience
59 reviews
Gustavo
15 years of experience
Mercedes-Benz GLA250 L4-2.0L Turbo - 20,000 Miles Maintenance Service - Teaneck, New Jersey
Good guy and everything he did was seamless, didn’t have to do a thing except give him my car keys!

Excellent Rating

(48)

Rating Summary
46
2
0
0
0
46
2
0
0
0
Number of Mercedes-Benz GLA250 services completed
528+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Pennsylvania Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Pennsylvania. Speed limits in Pennsylvania 70 mph: some sections of rural freeways and the Pennsylvania Turnpike 65 mph:...
Top Automotive News & Stories: July 27-August 3
Each week we compile the best announcements and developments from the world of cars. Here are the topics you can’t miss from July 27 to August 3. Most Stolen Cars List Released most stolen cars...
OBD-II Trouble Code P0688: ECM/PCM Power Relay Sense Circuit/Open
P0688 means there is an output circuit issue in the power relay sense circuit, likely due to a damaged or defective ECM relay or faulty wiring.

Fuses keep blowing out

I think you may be correct. There are hundreds of wires behind your dash that could potentially intersect and cause problems. Most likely, two different circuits that run different amounts of amperage have intersected, and are now causing circuitry issues....

Why when I start my car its very accelerated?

If you are getting a very high idle when you first start the car and it comes down to a normal idle in less than five minutes, then you may have a vacuum leak in the intake manifold gasket that...

I have a g35 04 the car over heated when I was driving and I added coolant and tried to turn the heater on as well but it wouldn’t

Hi Merks. Thanks for contacting us today. Typically when your car overheats and there is no heat coming from the heater, it's due to an obstruction of debris inside the heater core, or a damaged heater core itself. It could...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com