Mercedes-Benz GL320 Hazard / Turn Signal Flasher Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Hazard / Turn Signal Flasher Replacement Service

How much does a Hazard / Turn Signal Flasher Replacement cost?

On average, the cost for a Mercedes-Benz GL320 Hazard / Turn Signal Flasher Replacement is $193 with $98 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Mercedes-Benz GL320V6-3.0L Turbo DieselService typeHazard / Turn Signal Flasher ReplacementEstimate$311.65Shop/Dealer Price$378.32 - $538.94
2009 Mercedes-Benz GL320V6-3.0L Turbo DieselService typeHazard / Turn Signal Flasher ReplacementEstimate$291.65Shop/Dealer Price$358.35 - $518.99
2008 Mercedes-Benz GL320V6-3.0L Turbo DieselService typeHazard / Turn Signal Flasher ReplacementEstimate$291.65Shop/Dealer Price$358.35 - $518.99
Show example Mercedes-Benz GL320 Hazard / Turn Signal Flasher Replacement prices

What is the Hazard / Turn Signal Flasher all about?

The hazard / turn signal flasher is a small, electrical device that causes the lights on your vehicle to flash in a rhythmic, steady fashion. It is usually located under the driver’s side of the dash, and is wired in-line with the turn signal lever and hazard switch buttons. When the turn signals or hazard lights are turned on, the circuit’s power is routed through the flasher, which only emits short bursts of power that cause the lights to flash. If the flasher is not working, your hazard or turn signal lights may stay on solid when turned on, not turn on at all, or flash at an undesirable rate.

Keep in mind:

  • Flasher units hardly ever develop problems. Although in older vehicles, the wiring can become compromised.
  • Don’t assume that the problem is with the flasher – it could be something as simple as a blown fuse.
  • Check your bulbs, and replace them if necessary.

How it's done:

  • The vehicle's hood is opened and supported manually
  • The new relays are installed onto a mounting bracket
  • The wiring is connected to the relays and into the vehicle harness
  • The hood manual support is removed
  • The install is verified and the hazard lights are tested for proper operation

Our recommendation:

If your turn signals aren’t working, you will fail a motor vehicle inspection or a roadside check. Examine your fuses to make sure none are discolored – this indicates a blown fuse that could be causing the problem. Check your light bulbs as well. If all are in good working order, then the problem could be the hazard / turn signal flasher, which is part of your car's electrical system. Have one of our expert mechanics inspect and replace the hazard turn signal flasher if required.

What common symptoms indicate you may need to replace the Hazard / Turn Signal Flasher?

  • No turn signals on either side
  • Turn signal on only one side
  • Turn signals light up but don’t flash
  • Turn signal flashes too slow
  • Turn signal flashes too fast
  • Hazard lights don’t work

How important is this service?

Malfunctioning turn signals and hazard lights are critical safety issues. If your turn signals aren’t working, you have no way of communicating your driving intentions to other drivers aside from hand signals. Have one of our expert mechanics check them immediately so that the problem can be diagnosed, and appropriate measures taken, such as replacing your hazard / turn signal flasher.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(12)

Rating Summary
11
0
0
0
1
11
0
0
0
1

Alex

16 years of experience
435 reviews
Alex
16 years of experience
Mercedes-Benz GL320 V6-3.0L Turbo Diesel - Alternator - Dallas, Texas
Alex was professional, prompt and is a highly competent mechanic. What else could you ask for? Thanks Alex!

Alex

16 years of experience
435 reviews
Alex
16 years of experience
Mercedes-Benz GL320 V6-3.0L Turbo Diesel - Oil/Fluid Leak - Dallas, Texas
Alex is competent, friendly and professional. Highly recommend him!

Tyrone

11 years of experience
423 reviews
Tyrone
11 years of experience
Mercedes-Benz GL320 V6-3.0L Turbo Diesel - Axle / CV Shaft Assembly Replacement (Driver Side Front) - Waldorf, Maryland
A+

Daniel

11 years of experience
72 reviews
Daniel
11 years of experience
Mercedes-Benz GL320 V6-3.0L Turbo Diesel - Serpentine/Drive Belt - Chicago, Illinois
Trust me Daniel knows what he’s doing

Excellent Rating

(12)

Rating Summary
11
0
0
0
1
11
0
0
0
1
Number of Mercedes-Benz GL320 services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P0415 OBD-II Trouble Code: Secondary Air Injection System Switching Valve B Circuit Malfunction
P0415 code means a voltage signal from the secondary air injection system which falls outside of the expected parameters.
How to Maintain Automotive Hand Tools
Automotive technicians take good care of automotive hand tools to stay safe and save money. Keep parts clean and in working order to maintain tools.
How to Replace a Differential Gasket
Differential gaskets seals the differential housing and protects the rear-end gears and axles from exposure to the elements.

2002 Isuzu Rodeo hard to start when cold

Hi there. If your vehicle stalls at red lights, it is likely a fuel problem. I recommend checking the performance of the fuel pressure regulator and fuel pump by using a fuel pressure gauge. If you need further assistance, I...

I have oil smoking out of my oil dip stick and oil filler on my valve cover. Lots of smoke coming out of my PCV valve

Hey there. Worn piston rings create more crankcase fumes (i.e. the smoke you see coming out of breather tubes and orifices). This is called "blow-by". As long as the PCV valve stays clear, and the engine can handle the fume/clean...

I have a 2002 Toyota Corolla and I'm having hesitation issues coming from a stop. I have tried everything to try and fix it. I hav

Claimed by Kevin Gainer

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com