Mercedes-Benz CLK63 AMG Engine oil is black and gritty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,716)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,716)

Engine oil is black and gritty Inspection Service

How much does a Engine oil is black and gritty Inspection cost?

On average, the cost for a Mercedes-Benz CLK63 AMG Engine oil is black and gritty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Mercedes-Benz CLK63 AMGV8-6.3LService typeEngine oil is black and gritty InspectionEstimate$114.99Shop/Dealer Price$139.99 - $158.75
2009 Mercedes-Benz CLK63 AMGV8-6.3LService typeEngine oil is black and gritty InspectionEstimate$94.99Shop/Dealer Price$120.04 - $138.82
2007 Mercedes-Benz CLK63 AMGV8-6.3LService typeEngine oil is black and gritty InspectionEstimate$94.99Shop/Dealer Price$120.03 - $138.82
Show example Mercedes-Benz CLK63 AMG Engine oil is black and gritty Inspection prices

Car engines need oil to operate smoothly and efficiently. Engine oil helps lubricate the dozens of moving and interacting parts, helps prevent rust and corrosion as well as aiding in removing the heat that an engine generates. Modern oil also helps keep an engine clean by removing sludge and build-up. An engine without oil simply will not function.

Brand new engine oil is a lovely amber color but over time it will turn black and in some cases will get gritty. Fortunately, this is usually not a problem, it is simply a result of the oil doing the job it was designed to do.

How this system works:

The primary function of engine oil is to lubricate the various moving parts of an engine. The constant contact between these moving parts generates both heat and wear and tear. Engine oil keeps friction to a minimum and dissipates the heat.

Engine oil is stored in the oil pan. The pan holds between 4 and 6 quarts of oil. When an engine is started, an oil pump sucks the oil from the pan through the pickup tube. The oil then travels to the oil filter, which removes any dirt and debris that has accumulated in it and then sends the oil into the engine via spurt holes. The oil moves through the engine and eventually makes it way back to the oil pan where the process starts again.

Common reasons for this to happen:

  • Normal Wear and Tear: Regardless of how often oil is changed, eventually it becomes black and slightly gritty. This simply means it is doing its job. Modern detergent engine oils which have detergent additives are designed to disperse the tiny particles or engine sludge and hold them in suspension in the oil so they do not build up on engine parts.

This will make the oil darker in color, and slightly gritty but it’s better for the build up to be trapped in the oil then building up on the vehicles engine parts. Oil can only hold so much sludge and eventually it will need to be replaced.

  • Dirty Oil Filter: An oil filter’s primary function is to filter out contaminants in the oil that it picks up while cycling through the engine. Over time an oil filter will become full and will need to be replaced. If it is unable to filter the oil the contaminants will remain in the oil and possibly damage the engine.

  • Overdue for an Oil Change: Oil needs to be changed on a regular basis. While oil turning black and getting slightly gritty is normal, extremely black oil that develops globs on the dipstick needs to be changed immediately. The interval between oil changes will vary depending on the type of oil being used but it is a good idea to follow the manufacturers recommendations.

While 3,000 miles used to be the recommendation, most modern oils, especially synthetics can go between 7,000-10,000 before an oil change is needed.

  • Oil Light Comes On: In most vehicles, if the Oil Warning light comes on, it is reason for immediate concern. In most cases this will indicate a low oil pressure situation, which could be the result of a failing oil pump or a leak. This can do severe damage to the engine. The vehicle should be inspected and repaired immediately.

  • Oil Level is Dropping: If the vehicle is consistently low on oil or the level is dropping sharply over a short period of time, there is probably an oil leak somewhere in the system. An oil leak can lead to a dangerously low amount of oil in the car and should be repaired immediately.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the Oil is Black and Gritty issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic look for normal wear and tear of the engine oil, along with the oil filter, oil level and other indications that will help determine if any problem exists or if additional procedures are required in order to provide you with an accurate diagnosis.

How important is this service?

In most cases black and gritty engine oil is normal. Engine oil should be changed on a regular basis according to the manufacturers recommendations. Going too long between oil changes can affect the performance of the engine and lead to expensive repairs.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,716)

Rating Summary
5,320
192
54
29
121
5,320
192
54
29
121

Ben

41 years of experience
1452 reviews
Ben
41 years of experience
Mercedes-Benz E350 V6-3.5L - Oil Change - Houston, Texas
He went above and beyond of what I expected. Came early. Finished early.

Derek

17 years of experience
21 reviews
Derek
17 years of experience
Mercedes-Benz SL500 V8-5.0L - Headlight Bulb Replacement (Passenger Side Low Beam) - Phoenix, Arizona
What a great perfectionist , a man on a mission , honest ,diligent ,trustworthy ,HE is a ASSET for your company ,Dear "Your Mechanic " == 5 STARS

Fred

17 years of experience
389 reviews
Fred
17 years of experience
Mercedes-Benz ML320 V6-3.2L - Power Steering Pump - Humble, Texas
Fred was very thorough in repairing my car, he explained everything in detail.

Jeremy

20 years of experience
638 reviews
Jeremy
20 years of experience
Mercedes-Benz SLK350 V6-3.5L - Brakes, Steering and Suspension Inspection - Boynton Beach, Florida
He is my guy! The best.

Excellent Rating

(5,716)

Rating Summary
5,320
192
54
29
121
5,320
192
54
29
121
Number of Mercedes-Benz services completed
62876+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

The Guide to Right-of-Way Laws in Massachusetts
If If you are in traffic, and there are no signs or signals telling you what to do, what recourse do you have? Well, you have to know the right-of-way laws as they apply in the state of Massachusetts. They’re...
How to Stay Safe While Driving on the Highway
Highway driving requires preparation, practice, and respect. All drivers should know the safety basics for your own wellbeing and others on the road.
P0960 OBD-II Trouble Code: Pressure Control Solenoid A Control Circuit/Open
P0960 P0960 code definition The P0960 code is a generic powertrain code related to the transmission, including pressure faults and sensor failures. In this case, the engine control module (ECM) has received a signal noting that the pressure control solenoid...

Car misfiring

Hello, since the car is misfiring there is probably a Check Engine Light that goes along with it. A simple code reader can give you the code associated with that cylinder that is missing. The next step is a little...

Headlights not working - 2005 Buick LeSabre

Hello. A common fault is the combination / multi-function switch (https://www.yourmechanic.com/services/headlight-switch-replacement). This is the signal / high beam switch located on the steering column. If you need help having this checked, a qualified professional from YourMechanic can come to your...

How do you know if the ignition needs to be replaced when you replace the plugs on dodge 5.7 hemi?

Hi there. To determine if the ignition coils need to be replaced, remove one park plug wire at a time and hook it up to a spark tester gauge and set the gauge to 10 thousands gap and increase it...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com