Mercedes-Benz CLK430 Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(34)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(34)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Mercedes-Benz CLK430 Car Battery Replacement is $353 with $258 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Mercedes-Benz CLK430V8-4.3LService typeCar Battery ReplacementEstimate$630.79Shop/Dealer Price$777.24 - $1177.22
2001 Mercedes-Benz CLK430V8-4.3LService typeCar Battery ReplacementEstimate$610.79Shop/Dealer Price$757.27 - $1157.27
2000 Mercedes-Benz CLK430V8-4.3LService typeCar Battery ReplacementEstimate$610.79Shop/Dealer Price$757.27 - $1157.27
2002 Mercedes-Benz CLK430V8-4.3LService typeCar Battery ReplacementEstimate$610.79Shop/Dealer Price$757.23 - $1157.20
2003 Mercedes-Benz CLK430V8-4.3LService typeCar Battery ReplacementEstimate$610.79Shop/Dealer Price$757.30 - $1157.32
Show example Mercedes-Benz CLK430 Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(34)

Rating Summary
32
0
1
0
1
32
0
1
0
1

Bryant

8 years of experience
568 reviews
Bryant
8 years of experience
CLK430 2001 - Pre-purchase Car Inspection - Indianapolis, IN
Very professional and easy to understand. Confident in his information.

Peter

36 years of experience
1542 reviews
Peter
36 years of experience
CLK430 2001 - 75 Point Safety Inspection - Mesa, AZ
Peter knows his stuff great person explains everything he's doing

Excellent Rating

(34)

Rating Summary
32
0
1
0
1
32
0
1
0
1
Number of Mercedes-Benz CLK430 services completed
374+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Exhaust Manifold Gasket
The The exhaust manifold is a component of the exhaust system of a vehicle that connects to the cylinder head of the engine and collects gases and combines them from individual exhaust ports through to the rest of the exhaust...
How Long Does a Steering Gear Adjuster Plug Last?
It’s It’s very important that you have the right amount of control for handling your vehicle. The steering wheel’s movement should be precise and smooth. Of course, as your steering components age, the precision that marked it originally will fade....
P001A OBD-II Trouble Code: "A" Camshaft Profile Control Circuit/Open
P001A means the camshaft and crankshaft signals have malfunctioned which may cause a poorly running engine, reduced power or a no-start condition.

Car does not go into gear.

Most of the time when this issue occurs it is due to the shift interlock solenoid going bad. Systems that use this part usually have a manual override button near the shifter in order to manually shift into a gear....

Brakes easily lock up on snow

There are two possible causes that come to mind: The brakes (https://www.yourmechanic.com/services/brake-pads-replacement) have excessive runout and are warped A wheel bearing (https://www.yourmechanic.com/services/wheel-bearings-replacement) is failing If the wheel bearing has failed, it can cause some serious problems if not dealt with....

On cold start up it idles up to 2800 after a few min i tap the gas and it drops to normal 800 -1000 rpm idle speed

The fast idle speed on your vehicle should be 2100 rpm. The carburetor on your truck has a choke system that will increase the idle when it's cold, to help get the truck up to operating temperature a little more...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com