Mercedes-Benz CLA45 AMG Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(3)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Mercedes-Benz CLA45 AMG Brake Pad Replacement is $236 with $96 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Mercedes-Benz CLA45 AMGL4-2.0L TurboService typeBrake Pads - Rear ReplacementEstimate$359.54Shop/Dealer Price$419.68 - $579.83
2022 Mercedes-Benz CLA45 AMGL4-2.0L TurboService typeBrake Pads - Front ReplacementEstimate$489.25Shop/Dealer Price$569.96 - $807.16
2015 Mercedes-Benz CLA45 AMGL4-2.0L TurboService typeBrake Pads - Front ReplacementEstimate$337.87Shop/Dealer Price$390.49 - $537.88
2021 Mercedes-Benz CLA45 AMGL4-2.0L TurboService typeBrake Pads - Rear ReplacementEstimate$436.15Shop/Dealer Price$503.62 - $701.01
2014 Mercedes-Benz CLA45 AMGL4-2.0L TurboService typeBrake Pads - Rear ReplacementEstimate$350.53Shop/Dealer Price$409.99 - $569.64
2019 Mercedes-Benz CLA45 AMGL4-2.0L TurboService typeBrake Pads - Front ReplacementEstimate$337.49Shop/Dealer Price$387.36 - $532.49
2016 Mercedes-Benz CLA45 AMGL4-2.0L TurboService typeBrake Pads - Rear ReplacementEstimate$350.53Shop/Dealer Price$406.35 - $563.27
2020 Mercedes-Benz CLA45 AMGL4-2.0L TurboService typeBrake Pads - Front ReplacementEstimate$406.95Shop/Dealer Price$474.05 - $671.16
Show example Mercedes-Benz CLA45 AMG Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of Mercedes-Benz CLA45 AMG services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Buy a Used Car on AutoTrader
The The online vehicle aggregator site AutoTrader.com (http://www.autotrader.com/) allows you to quickly and effectively search through thousands of used vehicles sold by dealers and private sellers. On the AutoTrader site, you can find vehicle reviews, advice for shopping, and car...
How to Make Chrome Wheels Shine
Chrome Chrome wheels are a way to change your car’s mundane appearance into a highly-attractive, sporty look. Some high-end or luxury cars have chrome wheels (https://www.yourmechanic.com/article/3-essential-things-to-know-about-your-car-s-rims) installed at the factory while many other car owners have chrome wheels installed after...
The Guide To Colored Curb Zones in Connecticut
Connecticut Connecticut parking laws and colored pavement markings While there are certainly plenty of rules and laws to remember when you are behind the wheel and on the road in Connecticut, you also have to keep in mind the parking...

Jeep doesn't want to start.

Having to jump start your Jeep every time you need to drive it sounds like quite a bother. From the symptoms you are describing, it appears your Grand Cherokee may be experiencing an electrical concern. When your vehicle has a...

Van leaking coolant

It sounds like there is a large coolant leak, especially if the system is loosing a considerable amount of coolant. The cooling system will need to be inspected for the source of the leak (https://www.yourmechanic.com/services/coolant-is-leaking-inspection). Many times the source of...

I put too much oil in my car and its smoking

You should drain it down or have it changed. Over filling oil can cause the engine to get locked up from too much oil in the crankcase. I'd recommend getting some assistance from a certified mechanic who can come and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com