Mercedes-Benz CLA250 Car idle is rough Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(93)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(93)

Car idle is rough Inspection Service

How much does a Car idle is rough Inspection cost?

On average, the cost for a Mercedes-Benz CLA250 Car idle is rough Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2020 Mercedes-Benz CLA250L4-2.0L TurboService typeCar idle is rough InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2017 Mercedes-Benz CLA250L4-2.0L TurboService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2022 Mercedes-Benz CLA250L4-2.0L TurboService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2014 Mercedes-Benz CLA250L4-2.0L TurboService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
2016 Mercedes-Benz CLA250L4-2.0L TurboService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2021 Mercedes-Benz CLA250L4-2.0L TurboService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2018 Mercedes-Benz CLA250L4-2.0L TurboService typeCar idle is rough InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2019 Mercedes-Benz CLA250L4-2.0L TurboService typeCar idle is rough InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Mercedes-Benz CLA250 Car idle is rough Inspection prices

A rough idling engine can be caused by a number of issues, some of them are serious while others tend to be minor, but the symptoms remain pretty much the same. The car will feel rough and bouncy when the engine is running. The car will also idle below its regular speed, display inconsistent RPMs and may produce a shaking, skipping or slipping sound when the vehicle is running.

While a rough idling engine may seem to be a simple inconvenience it often indicates a deeper problem within the engine. The vehicle should be inspected and repaired as soon as possible because small problems have a way of turning into expensive repairs.

How this system works:

The idle speed of an engine is basically the rotational speed the engine runs on when it is un-coupled from the drivetrain and the throttle pedal is not being depressed. The idle speed is measured in the revolutions per minute of the crankshaft.

When an engine is running at idle speed it generates enough power to smoothly operate equipment such as the water pump, alternator, and power steering but not enough power to move the vehicle itself. A passenger car will usually idle between 600 RPMs and 1000 RPMs. A properly functioning idle should run smoothly without skipping or slipping.

Common reasons for this to happen:

  • Dirty Fuel Injectors: The fuel injection system injects fuel into the cylinders, which creates a mix of air, and fuel to ignite and burn. Fuel injectors have tiny nozzles to spray the fuel into the cylinder and they can become clogged over time.

A clogged or failing fuel injector creates a lack of fuel in the vehicle's engine. This can cause a rough idle, it can also cause symptoms such as slow acceleration or the car not feeling as if it has enough power. If the problem is addressed early, it is possible to clean the injectors, which will restore them to full function. If this condition is not addressed in a timely manner the injectors will need to be replaced.

  • Incorrect Idle Speed: While the average idle speed falls between 600 to 1,000 RPMs, if your vehicle is experiencing a rough idle it could be due to an incorrect idle speed setting. A trained mechanic can easily adjust the idle speed, and it should stay at the proper speed. If an adjusted idle speed becomes inconsistent or changes at random intervals there may be a bigger problem that needs to be explored.

  • Vacuum Leak: If the vacuum system has a leak, it can seriously affect the ability of the vehicle’s computer to regulate the air to fuel ratio. This can lead to a rough idle and if the problem is not addressed the car may experience slow acceleration and a lack of power. Vacuum leaks should be inspected and repaired immediately.

  • Incorrectly Installed or Damaged Plugs: Spark plugs are responsible for creating the spark that allows the vehicle to burn fuel. If spark plugs are improperly installed or malfunctioning, the idle speed can be affected. The vehicle's engine may vibrate or there may be slipping or straining sounds coming from the engine.

  • Defective or Clogged Fuel Pump: A rough idle can be related to fuel delivery issues. The fuel pump, which is responsible for pulling fuel from the gas tank to the fuel injectors, can become clogged or defective. If this happens the engine will not get enough fuel, which can cause a rough idle, sputtering, stalling and even slow acceleration.

  • Clogged Fuel Filter: A clogged fuel filter can cause similar problems. The job of the fuel filter is to screen out contaminants in the fuel, over time it will become clogged and need to be replaced. A rough idle is one symptom of a clogged fuel filter.

  • Failing Electrical Components: A problem or failure in the ignition system or various electronic components can cause a rough idle. If this is the case, the problem will usually get worse as RPMs increase. Common culprits include the ignition control module, plug wires, coils, and spark plugs.

  • Defective Airflow Sensor: A defective airflow sensor can be responsible for a rough idle. A mass airflow sensor detects the amount of air coming into the fuel injection system and sends that information to the vehicle's computer. The computer uses that data to deliver the proper amount of fuel to the air in the vehicle. Over time these sensors can malfunction or become dirty. One of the first symptoms of a malfunctioning airflow sensor is a rough idle. The car may also accelerate slowly and even stutter or stall as the problem progresses.

  • Dirty Oxygen Sensor: Oxygen sensors measure how rich or lean the gases are as they exit the combustion chamber. Depending on the results, the amount of fuel entering the engine is adjusted by the vehicle computer. The ultimate goal is to maintain an ideal mixture that produces the lowest emissions. A dirty or failing oxygen sensor will usually trigger the check engine light and can lead to a rough idle, lower fuel efficiency and failed emission test.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the rough idle issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will check your car for leaks and defective parts. This includes airflow sensors, fuel pump, electronics and other important components related to your car's idling state. It may be necessary to crank the car and test drive it in order to verify the problem and provide an accurate diagnosis.

How important is this service?

A rough idling car is more of an inconvenience at first but if the problem is not solved it can quickly lead to bigger problems such as slow acceleration, stalling and eventually a vehicle that will not start at all. Most of these conditions can make the vehicle dangerous to drive. A rough idle should be inspected and repaired as quickly as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(93)

Rating Summary
90
2
0
0
1
90
2
0
0
1

Lavell

28 years of experience
244 reviews
Lavell
28 years of experience
Mercedes-Benz CLA250 L4-2.0L Turbo - Oil Change - San Leandro, California
Very good

Collins

12 years of experience
496 reviews
Collins
12 years of experience
Mercedes-Benz CLA250 L4-2.0L Turbo - Spark Plugs - Atlanta, Georgia
Thorough and honest.. fast and precise will try to book for future appointments...

Mario

7 years of experience
135 reviews
Mario
7 years of experience
Mercedes-Benz CLA250 L4-2.0L Turbo - Tire Rotation - Richmond, Virginia
Mario was on time which is definitely a plus for me. He did a great job and educated me on recommended upcoming maintenance. Will certainly use his services again.

Ramon

20 years of experience
166 reviews
Ramon
20 years of experience
Mercedes-Benz CLA250 L4-2.0L Turbo - Serpentine/Drive Belt - Tucson, Arizona
Great customer service. Will be using Ramon again..

Excellent Rating

(93)

Rating Summary
90
2
0
0
1
90
2
0
0
1
Number of Mercedes-Benz CLA250 services completed
1023+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Transfer a Car Title in Washington
Within Within the state of Washington, all vehicles are required to be title with the name of the owner appearing on the title itself. When ownership changes, whether because the vehicle was bought or sold, or it was given as...
P0477 OBD-II Trouble Code: Exhaust Pressure Control Valve Low
P0477 code means that the PCM has detected an abnormally low voltage reading often due to the exhaust back pressure control valve circuit.
P0757 OBD-II Trouble Code: Shift Solenoid B Stuck On
P0757 code means the PCM has registered an irregularity within the shift solenoid B often due too hydraulic blockages internally or malfunctioning.

The Check Engine Light came on, I hooked it up to my scanner and got the code P0308 (cylinder #8 misfire).

An easy way to isolate if the ignition coil is the problem is to swap the #8 coil with another cylinder. Swap the #8 coil with the coil from the adjacent cylinder, then clear the codes. If the code remains...

Vehicle wont shift out of first gear, only first and reverse gears work

Hello there, a variety of faults will cause your 1999 Mercedes ML430 to not shift out of first gear. The first step in any transmission or shifting issue is to check the transmission fluid level, condition, and color. After the...

Engine shut off after smoking and won't turn on now.

Hi there. The battery has burned up, the alternator has burned up, or the starter has burned up causing the engine to not start up. If the vehicle was running with a clicking sound and then the engine has stalled...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com