Mercedes-Benz CL63 AMG Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Mercedes-Benz CL63 AMG Fuel Injector Replacement is $1221 with $913 for parts and $308 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Mercedes-Benz CL63 AMGV8-5.5L TurboService typeFuel Injector ReplacementEstimate$7441.88Shop/Dealer Price$9219.05 - $14493.86
2010 Mercedes-Benz CL63 AMGV8-6.3LService typeFuel Injector ReplacementEstimate$2146.20Shop/Dealer Price$2612.54 - $3988.87
2009 Mercedes-Benz CL63 AMGV8-6.3LService typeFuel Injector ReplacementEstimate$2146.20Shop/Dealer Price$2612.68 - $3989.11
2013 Mercedes-Benz CL63 AMGV8-5.5L TurboService typeFuel Injector ReplacementEstimate$7416.65Shop/Dealer Price$9181.63 - $14447.29
2011 Mercedes-Benz CL63 AMGV8-5.5L TurboService typeFuel Injector ReplacementEstimate$7343.40Shop/Dealer Price$9117.27 - $14397.68
2012 Mercedes-Benz CL63 AMGV8-5.5L TurboService typeFuel Injector ReplacementEstimate$7416.65Shop/Dealer Price$9182.61 - $14449.01
2008 Mercedes-Benz CL63 AMGV8-6.3LService typeFuel Injector ReplacementEstimate$2683.72Shop/Dealer Price$3284.66 - $5064.29
Show example Mercedes-Benz CL63 AMG Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(6)

Rating Summary
5
1
0
0
0
5
1
0
0
0

Dana

26 years of experience
13 reviews
Dana
26 years of experience
Mercedes-Benz CL63 AMG V8-5.5L Turbo - Oil Change - Fairfax, Virginia
Job well done .

David

14 years of experience
463 reviews
David
14 years of experience
Mercedes-Benz CL63 AMG V8-6.3L - Battery - Marietta, Georgia
Right on time. Great service.

Jermaine

25 years of experience
382 reviews
Jermaine
25 years of experience
Mercedes-Benz CL63 AMG V8-5.5L Turbo - Oil Change - Greenbelt, Maryland
Good Job .

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Mercedes-Benz CL550 V8-5.5L - Fuel Injector - Huntington Beach, California
He was very knowledgeable of what he was doing he explained everything to me and what the step were very good on thing he was doing

Excellent Rating

(6)

Rating Summary
5
1
0
0
0
5
1
0
0
0
Number of Mercedes-Benz Fuel Injector Replacement services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Least Expensive Luxury Cars to Insure
You’ve You’ve done well for yourself and are now in the market for a vehicle upgrade. It’s time to ditch the rattletrap you’ve been driving and snag yourself a car with some premium options. How do you decide which car...
C1095 OBD-II Trouble Code: ABS Hydraulic Pump Motor Circuit Failure
Trouble code C1095 means the ABS hydraulic pump motor circuit has failed, often because of a damaged wheel speed sensor or wheel bearings.
How Long Does an Air Pump Filter Last?
In In any vehicle that has an emissions system, otherwise known as a smog control system, it is vital that the air that enters the system is free of contaminants and debris. This is because the air is recirculated along...

Wipers are streaking

Stock wiper blades are pretty generic in terms of quality. Most manufactures choose cost over quality when it comes to wiper blades. If you want a dependable long lasting wiper blade I recommend rain x latitude blades. I've had a...

AC off - 2011 Chevrolet Cruze

Hello. Your Chevy Cruze uses a "heated" engine thermostat (https://www.yourmechanic.com/services/thermostat-replacement) (under computer control) which has caused some problems. There is a Technical Service Bulletin (https://www.yourmechanic.com/article/how-to-use-a-technical-service-bulletin-by-parker-hill) (301268) to address the "engine is cold" issue - software reprogramming). There are also multiple...

Speedometer has quit working.

Hi There, It sounds like you may have a faulty transmission speed sensor. The transmission speed sensor (https://www.yourmechanic.com/services/transmission-speed-sensor-replacement) relays output shaft speed on the transmission to the ECU which then translates this to the speedometer. When this sensor is not...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com